CANOPIA MV-5.2 Automatic Greenhouse Vent Opener Instruction Manual

October 30, 2023
CANOPIA

CANOPIA MV-5.2 Automatic Greenhouse Vent Opener

Product Information

The Automatic Vent OpenerTM is suitable for Palram-Canopia Greenhouses with pre-assembled roof vents. The vent length is XL 12/30cm, and it can lift a maximum weight of 14lb/6kg. The maximum vent opening size is 12/30cm. The product is recyclable.

Product Usage Instructions

  1. Before starting assembly, read the instructions carefully and keep them in a safe place for future reference.
  2. Place the Automatic Vent OpenerTM on the pre-assembled roof vent of your Palram-Canopia Greenhouse.
  3. Adjust the opener to fit the size of your window.
  4. Make sure the opener is securely attached to the window frame and the greenhouse.
  5. When the temperature inside the greenhouse rises, the Automatic Vent OpenerTM will automatically open the vent to allow fresh air to circulate. When the temperature drops, it will automatically close the vent.
  6. If you have any concerns or questions about the product, visit canopia.shop/support for assistance.

AUTOMATIC VENT OPENER™

  • Suitable for Palram – Canopia Greenhouses with pre-assembled Roof Vent

IMPORTANT

  • Please read these instructions carefully before starting assembly.
  • Keep these instructions in a safe place for future reference.

Specification

Vent| Length| Opening Temp Between| Max Vent Opening| Max Weight Lifted| Suitable For Windows up to Size
---|---|---|---|---|---
XL| 12” / 30cm| 53.6˚f & 59˚f / 12˚c & 15˚c| 12” / 30cm| 14lb / 6kg| 2ft² / 60cm

More Information

HAVE A CONCERN?

WE CAN HELP.

Before returning your purchase:

You didn’t find what you were looking for?

Still can’t find what you are looking for?

  • Please see next page for local customer care.

SCAN ME

USA

UNITED KINGDOM • IRELAND

AUSTRALIA

CANADA

GERMANY

AUSTRIA

SWITZERLAND

FINLAND

NEW ZEALAND

SOUTH AFRICA

POLAND

BEFORE ASSEMBLY

  1. Please CAREFULLY READ ALL, instructions & remarks, BEFORE STARTING THE ASSEMBLY of the Automatic Vent Opener.
  2. CARRY OUT the assembly steps IN THE ORDER SET OUT in the instructions.

FITTING THE UNIT

  • A manual vent opener, if already assembled, should be removed.
  • Follow the next steps for fitting the unit according to the greenhouse model you have purchased.
  • In the last step use the plastic-knurled adjuster to adjust closing gap.

IMPORTANT INFORMATION

  • Lubricate all moving parts after fitting and before each spring and autumn using light oil.
  • Use grease or petroleum jelly for the piston rod.
  • In case of snow accumulation during winter season and if you deploy a heating system inside your greenhouse, please remove the Automatic Vent Opener and switch to a manual opener.

TOOLS & EQUIPMENT

  • Work Gloves
  • Philips Head Screwdriver

IMPORTANT ASSEMBLY STEPS

Preparing the unit for fitting

  • Step 1: Prior to fitting the Automatic Vent Opener, the power tube has to be cooled by placing it in a refrigerator for approximately 30 minutes.
  • Step 2: Place the cool steel piston rod against a hard surface and push it firmly back into the power-tube.
  • Step 3: Lift the Automatic Vent Opener with one hand, and slip the threaded steel piston rod into the plastic knurled adjuster, which is fixed in the swiveling block.
  • Step 4: The plastic-knurled adjuster will be used later to adjust the vent closing position.

Automatic Vent Opener Assembly Instructions for: SNAP & GROW Greenhouses

Contents

INSTALLATION INSTRUCTIONS

Automatic Vent Opener Assembly Instructions for: Harmony, Hybrid, Mythos, Octave, Balance, Essence, Americana, Victory, Glory, Bella & Lean To Grow House 8×4 Silver Line. Inter Line. Multi Line Greenhouses

Contents

INSTALLATION INSTRUCTIONS

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

CANOPIA User Manuals

Related Manuals