VEVOR SF-808 Digital Postal Scale Instruction Manual
- October 30, 2023
- VEVOR
Table of Contents
SF-808 Digital Postal Scale
Instruction Manual
SHIPPING SCALE
MODEL:SF-808
SF-808 Digital Postal Scale
We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and doses not necessarily mean to
cover all categories of tools offered by us. You are kindly reminded to
verify carefully when you are placing an order with us if you are actually
saving half in comparison with the top major brands.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us: CustomerService@vevor.com
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
| Warning-To reduce the risk of injury, user must read instructions manual
carefully.
---|---
****| This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:(1)This device may not cause harmful
interference, and (2)this device must accept any interference received,
including interference that may cause undesired operation.
| This product is subject to the provision of European Directive 2012/19/EC.
The symbol showing a wheelie bin crossed through indicates that the product
requires separate refuse collection in the European Union. This applies to the
product and all accessories marked with this symbol. Products marked as such
may not be discarded with normal domestic waste, but must be taken to a
collection point for recycling electrical and electronic devices
INSTRUCTIONS
Thank you very much for choosing this digital scale. weighing scales are
precision instruments that should always be handled with care. Please read all
of the instructions before using it. The information will help you achieve the
best possible results. 
C LCD display
D ON/OFF button
E MODE button| F TARE button
G Battery jar
H Battery cover
---|---
SAVE THIS MANUAL
| Capacity × Graduation | 200kgx50g |
|---|---|
| Weighing units | Kg lobos lb |
| Weighing pan size | 12” x 10” |
| Overload indication | 〖Ogled〗 |
| Low voltage indication | 〖LO〗 |
| Optimum operating temperature | 5℃-35℃ |
| Power Suppler | 4 x AAA(1.5V) batteries or AC adapter (110-240V AC to 5V DC) |
BUTTON FUNCTIONS
Button Functions
- ON/OFF Button: Pressing this button will turn the scale on and off
- TARE Button: Pressing this button will tare the weight of the load. The tare function will eliminate the weight put on the scale, such as a container or vessel. This will give the weight only of the items added to the container.
- UNIT Button: Pressing this button changes the unit of measure for the scale.
OPERATION
-
Open the back cover and take out the indicator
Take out this indicator at the back of scale. -
Press the ON/OFF button to switch the product on. The display shows “0.0”.
-
Place an item on the weighing plate. Wait for the readout on the display to stabilize.
-
After use, press the ON/OFF button to switch the product off.
CALIBRATION
- Put the scale on a flat platform.
- Switch on the scale, press the “UNIT” for six seconds until LCD display show capacity and calibration weight.
- Press TAER button to select calibration weight between 20kg 50kg.
- Press UNIT button to choose calibration weight.
- Place the standard weight on the pan according to the value shown on the LCD display.
- After 2 to 3 seconds, the LCD display will show PASS indicating the scale has been calibrated successfully.
- If you fail in calibration, the scale will show “Err”. You can press ON/OFF to stop calibration and try again.
CAR INSTRUCTIONS
Don’t put the scale on an uneven surface
Don’t expose scale to moisture
Don’t drop or mistreat the scale
Don’t overload the scale. This will permanently damage it!
Don’t leave weight on the scale when not in use.
Replace battery when the scale shows “LO” on the display.
| items| Description
---|---|---
1| Name| Shipping Scale
2| Model| SF-808
3| Parameter| Rating(s): 4×1.5AAA or 5Vdc, Capacity:200kg/440Ib, Division:50g
4| Package Size| 360x305x80mm
5| G.W.| 2.4KG
Importer: WAITCHX
Address: 250 bus boulevard Saint-Germain 75007 Paris
Importer: FREE MOOD LTD
Address: 2 Holywell Lane, London, England, EC2A 3ET
Manufacturer: Jiangling Sofie Electronic Technology Co.,Ltd.
Address Building 70, Chuangrong Industrial City, Yucheng Street, Yuhina
City, Zhejiang Province
Made In China
EUREP UK LTD
UNIT 2264, 100 OCK STREET, ABINGDON OXFORDSHIRE ENGLAND OX14 5DH
EUREP GmbH
Unterlettenweg 1a, 85051 Ingolstadt, Germany
Technical Support and E-Warranty Certificate
www.vevor.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>