Andonstar AD2469M Series Microscope Monitor Instruction Manual
- October 30, 2023
- ANDONSTAR
Table of Contents
AD2469M Series Microscope Monitor
Product Information: Microscope Monitor
Thank you for choosing our Microscope Monitor. This product comes with the following components:
- Base
- Column
- Beam
- Screw x2
- Spring x2
- Metal clip x2
- Lens
- DC power supply slot
This product is designed to be used as a microscope monitor. It is important to read the assembly steps and user manual carefully before use. If you have any problems with the use and assembly, please feel free to contact us. We will reply within 24H (there may be a delay on holidays). Your satisfaction is our utmost priority!
Product Usage Instructions: Microscope Monitor
To assemble the microscope monitor, please follow the steps below:
Step 1:
- Attach the base to the column.
- Attach the beam to the column.
- Attach the screws and springs to secure the beam to the column.
- Attach the metal clips to the base if necessary.
Step 2:
- Assemble the lens into the slot.
- Insert the protrusion into the slot.
Step 3:
Assemble the DC power supply slot into the slot if using lens D.
Step 4:
Tighten all screws securely.
Step 5:
To remove the lens, unscrew the screws carefully. Be sure not to drop the lens.
Step 6:
To reassemble the lens, insert it into the slot and tighten the screws securely.
Components list
Thank you for choosing our products. Please read the assembly steps and user
manual carefully before use.
If you have any problems with the use and assembly, please feel free to
contact us.
We will reply within 24H (there may be a delay on holidays). We appreciate the
opportunity to serve you, your satisfaction is our utmost priority!
Assembly steps
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>