TOWSMART 738 Trailer Hitch Ball Mount Instruction Manual
- October 30, 2023
- TOWSMART
Table of Contents
TOWSMART 738 Trailer Hitch Ball Mount
Product Information
The 738 Ball Mount is a product designed for towing purposes. It is made to fit into a hitch receiver tube and is compatible with a variety of hitch pin holes and grooves. The product comes with a Hitch Pin Clip that is used to secure it in place. The ball mount is made of durable materials and can support a specific weight capacity, which should be observed before use. The product is manufactured by Winston Products Company and can be found online at www.towsmart.com. Warranty information is available upon request.
Product Usage Instructions
Before using the 738 Ball Mount, it is important to read and observe all warnings, instructions, and capacity limitations provided in the user manual. Failure to do so may result in serious personal injury and/or significant property damage.
- Insert the Ball Mount into the Hitch receiver tube.
- Align Hitch Pin holes.
- Insert a Hitch Pin or Receiver Lock of the corresponding diameter, into the receiver tube hole so that the end is completely out of the other side of the tube, exposing the Hitch Pin hole or groove or lock end.
- Insert the straight leg of the Hitch Pin Clip into the Hitch Pin hole or groove until it can go no further, or snap on the end of the Receiver Lock so that it is locked.
- Install the correct Hitch Ball so that the diameter matches the Coupler size.
If you experience any problems with your TOWSMART product, do not return the unit to the retailer from which it was purchased. Instead, call 1-844-295-9215 for assistance with any problems.
INSTALLATION INSTRUCTIONS
WARNING: Read and observe all warnings, instructions, and capacity limitations before using this product. Failure to comply with this warning and the associated instructions and capacity limitations may result in serious personal injury and/or significant property damage.
- Insert the Ball Mount into the Hitch receiver tube.
- Align Hitch Pin holes.
- Insert a Hitch Pin or Receiver Lock of the corresponding diameter, into the receiver tube hole so that the end is completely out of the other side of the tube, exposing the Hitch Pin hole or groove or lock end.
- Insert the straight leg of the Hitch Pin Clip into the Hitch Pin hole or groove until it can go no further, or snap on the end of Receiver Lock so that it is locked.
- Install the correct Hitch Ball so that the diameter matches the Coupler size:
- The shank should be long enough to exceed the Ball Mount bar thickness and a tightened nut by 2-1/2 threads.
- The diameter of the shank should match the tongue hole diameter.
- Torque nut according to 450 ft. lbs.
IF YOU EXPERIENCE ANY PROBLEMS WITH YOUR TOWSMART PRODUCT DO NOT RETURN THE UNIT TO THE RETAILER FROM WHICH IT WAS PURCHASED. INSTEAD, PLEASE CALL 1-844-295-9215 FOR ASSISTANCE WITH ANY PROBLEMS. WARRANTY INFORMATION IS AVAILABLE UPON REQUEST AND CAN BE FOUND ONLINE AT WWW.TOWSMART.COM.
Winston Products Company TOWSMART.COM WINSTON PRODUCTS, LLC. 30339 Diamond Parkway Cleveland, OH 44139