TOWSMART 726 Dual Adjustable Trailer Hitch Ball Mount Instruction Manual
- October 30, 2023
- TOWSMART
Table of Contents
TOWSMART 726 Dual Adjustable Trailer Hitch Ball Mount
Product Information: Dual Ball Mount
The Dual Ball Mount, manufactured by Winston Products Company, is an adjustable hitch designed for towing trailers. It can be inserted into a hitch receiver tube and secured with a Hitch Pin or Receiver Lock. The hitch has two different sized balls, allowing for versatility in towing different types of trailers.
It is important to read and follow all warnings, instructions, and capacity limitations before using this product to avoid serious personal injury and/or significant property damage.
Product Usage Instructions:
- Insert the Ball Mount into the hitch receiver tube.
- Align the Hitch Pin holes.
- Insert a Hitch Pin or Receiver Lock of a corresponding diameter into the receiver tube hole so that the end is completely out of the other side of the tube, exposing the Hitch Pin hole or groove or lock end.
- Insert the straight leg of the Hitch Pin Clip into the Hitch Pin hole or groove until it can go no further, or snap on the end of Receiver Lock so that it is locked.
- The Dual Ball Mount is now ready for towing.
- Periodically check to see if the Hitch Pin Clip is still secure.
If you experience any problems with your TowSmart product, do not return it to the retailer. Instead, call 1-844-295-9215 for assistance. Warranty information is available upon request and can be found online at www.towsmart.com.
DUAL BALL MOUNT
INSTALLATION INSTRUCTIONS
- WARNING: Read and observe all warnings, instructions, and capacity limitations before using this product. Failure to comply with this warning and the associated instructions and capacity limitations may result in serious personal injury and/or significant property damage.
- Insert the Ball Mount into the hitch receiver tube.
- Align Hitch Pin holes.
- Insert a Hitch Pin or Receiver Lock of a corresponding diameter, into receiver tube hole so that the end is completely out of the other side of tube, exposing the Hitch Pin hole or groove or lock end.
- Insert the straight leg of the Hitch Pin Clip into the Hitch Pin hole or groove until it can go no further, or snap on the end of Receiver Lock so that it is locked.
- It is now ready for towing.
- Periodically check to see if the Hitch Pin Clip is still secure.