NOISEAWARE NA3N301 Indoor Noise Sensor User Guide
- June 6, 2024
- NOISEAWARE
Table of Contents
NOISEAWARE INSTALLATION
AND MONITORING GUIDE
Get started
- Download the NoiseAware app from app.noiseaware.io. or from the Apple Store® or Google Play store.
|
---|---
https://apps.apple.com/us/app/noiseaware/id1436213179?ls=1| https://play.google.com/store/apps/details?id=io.noiseaware.mobile&hl=en - Set up an Indoor Noise Sensor first, following the instructions in the app.
- Install any additional Indoor or Outdoor Noise Sensors in the app.
We are here to help
help.noiseaware.io
888-787-8750
support@noiseaware.
Indoor Noise Sensor installation
You will need
Log into the app and follow the on-screen steps to set up your NoiseAware Indoor Sensor.
WARNING: Risk of Electric Shock. Mount only to outlets that can be
switched off by a circuit breaker. Use caution and disconnect power before
installation or removal. Local regulations in Canada prohibit securing this
device to an outlet with a screw.
WARNING: When removing outlet cover screw, cover may fall across plug
pins or outlet may become displaced. Use only with duplex outlets with a
compatible screw and
secure the sensor in place with the included screw whenever possible.
Outdoor Noise Sensor installation
Log into the app and follow the on-screen steps to set up your NoiseAware Outdoor Sensor.
WARNING: Indoor Noise Sensors must be installed before Outdoor Noise
Sensors! If there isn’t an Indoor Sensor online at the property, install one
before proceeding with Outdoor Sensor setup.
WARNING: If the Outdoor Noise Sensor is not automatically detected during
setup, it can be set up manually by entering the sensor’s MAC address. The MAC
address is printed on a label
by the batteries as well as a separate label in the box.. Manual setup may
take longer if the sensors have not yet successfully established a connection.
NoiseAware Sensor specifications
Generation: 3.1 Generation (Gen3.1)
Model: NA3N301 (Indoor) / NA3N302 (Outdoor)
US Patent: # 9,959,737
Detailed product specifications are available at www.noiseaware.io/product-
specifications
https://noiseaware.io/product-specification
Class II: This symbol indicates that the device is double insulated and does not rely on a connection to electrical earth (ground).
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures: Reorient or relocate the receiving antenna. Increase the separation
between the equipment and receiver. Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. Consult the
dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment complies with FCC and IC RF (Radio Frequency) exposure limits
set forth for an uncontrolled environment. This equipment should be installed
and operated with a minimum separation distance of 20 centimeters between the
device/antenna and the user’s head/body.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
This device is not intended for use by children or by persons with reduced
physical or mental capabilities unless supervised by a party responsible for
their safety. Children should be supervised around the devices and should
never play with them.
Copyright © NoiseAware, Inc. All rights reserved. NoiseAware is a registered
trademark of: NoiseAware Inc., Inc. 3106 Commerce St #100, Dallas, TX 75226.
Sensor installation information
Date of Installation:
Name of Property and Zone:
WiFi Network and Password:
Noise Thresholds:
Users Receiving Noise Alerts:
Comments:
Our mission is to prevent noise pollution with innovative technology and
remarkable customer service.
Thank you for being a valuable NoiseAware customer.