Unbranded D-W118965939 Oak Retro Wooden Accent Storage Cabinet Instruction Manual
- October 30, 2023
- UNBRANDED
Table of Contents
Unbranded D-W118965939 Oak Retro Wooden Accent Storage Cabinet
Product Information
This product is a tabletop with drawers and legs for residential (non-
commercial) use only. The maximum weight limit for the tabletop is 80lbs and
10lbs for each drawer, evenly distributed.
The package includes Item Body (A), Item Leg (B), Hex Bolt (H1),Washer (H2),
Alley Key (H3), and Foot Pad (H4).
Product Usage Instructions
- Read all instructions carefully and completely before assembly and use. Retain for future reference.
- Periodically check all hardware and re-tighten asnecessary.
- Put the Item Body (A)_tabletop on a soft surface to protect the finish.
- Attach the Legs (B) with Hex bolts (H1) and Washers (H2) using Allen key (H3). Do not overtighten the hardware before you assembly all bolts.
- Attach the Foot pads (H4) to the bottom of all Legs.
- Assembly Finished.
Warning: DO NOT sit or stand on the product. Use only for intended purpose.
If you have any questions about your purchase or any other product for sale, please contact Service@jimsidea.com with your order ID. Our customer service representatives are available to help.
Assembly Instruction
WARNING:
- Read all instructions carefully and completely before assembly and use. Retain for future reference.
- Periodically check all hardware and re-tighten as necessary.
- For residential (non-commercial) use only.
- DO NOT sit or stand on product. Use only for intended purpose.
- DO NOT exceed 80lbs for the tabletop and 10lbs for the drawers respectively , evenly distributed.
Parts List
Check all parts before assembly
Step1: Put the Item body (A)_tabletop on a soft surface to protect the finish. Attach the Legs (B) with Hex bolts (H1) and Washers (H2)using Allen key (H3) as below left photo shown. Do not overtighten the hardware before you assembly all bolts. Attached the Foot pads (H4) to the bottom of all Legs as shown in right photo below.
Assembly Finished
Notice: If you have any questions about your purchase or any other product for sale, please contact Service@jimsidea.com with your order ID, our customer service representatives are available to help.