IKEA FUBBLA LED Wall Lamp Instruction Manual
- October 30, 2023
- Ikea
Table of Contents
IKEA FUBBLA LED Wall Lamp
Product Information
The product is called FUBBLA and is an electrically operated lamp. It requires a maximum of 120VAC and 100mA at 60Hz. The lamp uses a GUZ 5.3 LED bulb and is not recommended for children under 3 years of age. The lamp should only be mounted on a mechanically sound surface using screws and plugs that are suitable for the material.
Product Usage Instructions
- Before using the lamp, read the instructions carefully and keep them for future reference.
- When mounting the lamp, ensure that it is on a mechanically sound surface to avoid injury or damage to the lamp and/or mounting surface.
- Choose screws and plugs that are suitable for the material of the surface where the lamp will be mounted.
- Assemble the lamp according to the instructions to avoid the risk of fire or electric shock.
- When changing the bulb, use only a GUZ 5.3 LED bulb.
Please note that deviation from the assembly instructions may result in a risk of fire or electric shock. Precautions should be observed during handling and use to prevent electric shock, especially when using the lamp around children under 3 years of age.
IMPORTANT – READ CAREFULLY – KEEP FOR FUTURE REFERENCE
WARNING! CAUTION – ELECTRICALLY OPERATED
PRODUCT
Not recommended for children under 3 years of age. As with all electric
products, precautions should be observed during handling and use to prevent
electric shock.
ATTENTION:
CAUTION:
Injury to persons and damage to the lamp and/or the mounting surface may
result if the lamp is pulled from the surface. To reduce the likelihood of
such injury or damage, mount only on a surface that is mechanically sound.
WARNING
Deviation from the assembly instructions may result in a risk of fire or
electric shock.
Different materials require different types of fittings. Always choose screws
and plugs that are specially suited to the material.
TOOLS
INFO
WHAT IN BOX
WARNING – Strangulation hazard.
NEVER place cord within reach of the child in a cot or playpen. ALWAYS secure
cord to wall. Check regularly that the cord is securely fastened. Pull the
cord to remove any slack between switch and both fasteners. Tie up any
remaining slack cord between fastener and socket. Please see illustration of
how to secure cord to wall further on in this document.
INSTURECTION
© Inter IKEA Systems B.V. 2018
2022-02-10 AA-2102621-6