VEVOR Bucket Integral Digging Tooth Instruction Manual
- October 30, 2023
- VEVOR
Table of Contents
VEVOR Bucket Integral Digging Tooth
Product Overview
The serial number| NAME| The length (mm)| teeth（PCS）|
pin（PCS）| Bolt + nut（PCS）
---|---|---|---|---|---
1| 48 inch| 1200| 6| 6| 4
2| 60 inch| 1505| 6| 6| 4
3| 66 inch| 1657| 7| 7| 4
4| 72 inch| 18096| 7| 7| 4
Product assembly instructions
- place the bucket motherboard according to the bucket size in bucket corresponding position, if there is a hole bucket on both sides of the edge, it shall, in accordance with the reserved hole position will bolt installation, product main board and bucket maintain tightness state ( note: if there is no hole on the bucket, it should be according to the products are mainly on the holes punched on the bucket, then to product for installation).
- place the tooth one by one according to the position of the tooth root on the mainboard for installation;
- put the pin in accordance with the reserved holes on the tooth one by one, need to use a hammer to knock into the hole, ensure that the pin is complete into the hole, ensure the installation and assembly of the tooth and bucket;
- Assembly is complete.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>