23ZERO Outbreak Double Swag 1550 Camping Tent User Manual
- October 30, 2023
- 23ZERO
Table of Contents
Outbreak Double Swag 1550 Camping Tent
User Manual
Outbreak Double Swag 1550 Camping Tent
-
Lay out OUTBREAK and peg out corners indicated below. Only anchor pegs half way at this point.
-
Identify poles
-
Insert 1 x body pole over pin & rings. Attach top 2 clips only.
-
Repeat step 3 for second body pole. Attach all pole clips. Alternate from left to right to keep pole tension balanced.
-
Fit Ridgepole by inserting spigots into holes at peak of body poles. Tension using trigger lock. Attach 2 x pole clips.
-
Anchor pegs completely.
WARNING: Cease hitting peg once peg hook reaches swag ring. Overhitting will affect swag stitching holding pin/ring loops. -
Unzip external zips on each side of the gusseted windows and peg out. Tension guy ropes with tensioner pictured below. Repeat for windopw other side.
-
Swag set up complete
OPTIONAL FLYSHEET
-
The optional flysheet has an awning on one side. Orientate this to suit.
-
Place flysheet over swag and attach 4 x hook & loop straps on each corner to OUTBREAK body poles (fig.1) Attach 4 x shock cord hooks on each corner to upper side pole clip (fig. 2)
3. Swag set up complete
WARRANTY
23ZERO will replace or repair any product at its discretion that is subject to
faulty manufacturing or workmanship including materials.
Exclusions
The above warranty is limited to manufacturing and materials defects. Not
including damage caused by misuse or abuse, wear and tear, condensation,
extreme weather, accidents, incorrect set up, damage caused by mould, insects,
animals or children.
This also excludes broken poles and damage caused by a jammed, snagged zipper
or excessive force applied to zipper causing failure.
Consumer rights
Our goods come with guarantees that cannot be excluded under Australian law.
You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have goods repaired or replaced if the goods fail to be of
acceptable quality and failure does not amount to a major failure.
- Due to our policy of continual product development, the specifications, colours and features may vary.
Making a claim
To make a claim in relation to the above manufacturers warranty please ensure you retain your sales receipt of purchase. Please email us at service@23zero.com.au with photos of the your claim, purchase reciept and contact details. If you require additional assistance, please phone 03 9547 4691 to discuss and arrange your claim. Product subject to warranty will be sent to 23ZERO Australia, 32b Eileen St Clayton South, Victoria 3169. All freight costs associated with return of product for assessment is payable by consumer.
23ZERO AUSTRALIA
www.23zero.com.au
32B Eileen Rd Clayton South, VIC 3169
sales@23zero.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>