23ZERO 1600 YOWIE Change Room Annex User Manual
- June 1, 2024
- 23ZERO
Table of Contents
23ZERO 1600 YOWIE Change Room Annex
Specifications
- Product Name: YOWIE Change Room Annex
- Manufacturer: 23ZERO
- Compatibility: Attaches directly to < RZLH roof top tent
- Available Sizes: 1600 & 2000
- Warranty: 2 Years
Installation
- Unpack the package contents as shown in Fig.1 and Fig.2.
- Attach the change room annex to the tent skirt and zip through as shown in Fig.7.
- Depending on vehicle height, set up the roof top tent ladder according to instructions before climbing (refer to Fig.9).
- Complete the setup by following the remaining steps as illustrated in the manual.
Pack Up / Folding
Follow the instructions provided in the manual for properly packing up and
folding the YOWIE Change Room Annex.
Warranty Information
23ZERO offers a 2-year warranty covering faulty manufacturing or workmanship,
including materials. Exclusions apply, such as damage caused by misuse, wear
and tear, accidents, etc. Refer to the manual for detailed warranty terms.
Note
Product specifications, colors, and features may vary due to continual product
development.
FAQ :
Q: What should I do if my roof top tent ladder is not long enough?
A: If the ladder is not long enough, you may need to acquire a longer ladder
that meets the height requirements for your vehicle.
CHANGE ROOM ANNEX
USER MANUAL
Congratulations on the purchase of 23ZERO’s <RZLH Change Room Annex. The
Change Room Annex attaches directly to a <RZLH roof top tent. The annexes are
available in 2 sizes, 1600 & 00 each made to fit corresponding 23ZERO <RZLH
tents.
PLEASE FOLLOW THESE INSTRUCTIONS FOR CORRECT INSTALLATION
PACKAGE CONTENTS
- 1x Polyester Change room annex
- 1 x PVC annex floor (not attached to annex)
- 2 x telescopic poles with carry bag
- pegs, guy ropes & peg bag
- Pack up strap
- Set up Yowie Roof top tent.
- Ensure nobody is inside tent, retract ladder and retain with ladder strap – Fig.1
- Identify Kedar ropes & attaching zips on Annex and layout under Yowie tent – Fig 2
NOTE: On First use PVC floor is not attached to annex.
- Locate Kedar rope on back side of opening – Fig.3
- Locate rope tracks on underside of Yowie tent – Fig 4
- Slide Kedar rope all the way through into the rear Yowie rope track – Fig 5,6
- Locate both left and right zips under the tent skirt. Engage the zip pull start on the change room annex to zip on tent skirt and zip through – Fig 7
- Repeat on other side- Fig 8 Fig.5
IMPORTANT :
Depending on vehicle height, roof top tent ladder may be required to complete
the following step. Set up ladder as per roof top tent instructions before
climbing.
- Continue to zip along and over up the tent canopy whilst securing the annex to relive tension as you go – Fig 10,11,12
- Attach PVC floor via zip if desired and anchor annex corners with pegs supplied – Fig 12
NOTE: Retract ladder and secure with retaining strap to avoid ladder interference while attaching floor.
- Fully erect enclosed segmented poles
- Locate the two roof eyelets within the annex located on either side of annex entry (Fig 13), insert the spigot end of pole through the eyelet (Fig 14)
- Repeat other side. Adjust telescopic poles to taut annex – Fig 15
- Complete set up by attaching guide ropes over the spigot end and peg adequately at a approximate 45 degree angle – Fig 16
Pack up / Folding
2 Year Warranty
23ZERO will replace or repair any product at its discretion that is subject to faulty manufacturing or workmanship including materials.
Exclusions
The above warranty is limited to manufacturing and materials defects. Not
including damage caused by misuse or abuse, wear and tear, condensation,
extreme weather, accidents, incorrect setup, damage caused by mould, insects,
animals or children. This also excludes broken poles and damage caused by a
jammed, snagged zipper or excessive force applied to zipper causing failure.
Consumer rights
Our goods come with guarantees that cannot be excluded under Australian law.
You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have goods repaired or replaced if the goods fail to be of
acceptable quality and failure does not amount to a major failure.
- Due to our policy of continual product development, the specifications, colours and features may vary.
Making a claim
To make a claim in relation to the above manufacturers warranty please ensure
you retain your sales receipt of purchase. Please contact us via email at
service@23zero.com.au stating the nature of
your claim and we will be in touch with you in a timely manner. If you require
additional assistance, please phone 03 9547 4691 to discuss and arrange your
claim. Product subject
to warranty will be sent to 23ZERO Australia, 32b Eileen Rd. Clayton South,
Victoria 3169. All freight costs associated with return of product for
assessment is payable by consumer.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>