nVent A239EC2S242G8LH Prefabricated Gate Jumper Assembly Installation Guide
- October 30, 2023
- nVent
Table of Contents
nVent A239EC2S242G8LH Prefabricated Gate Jumper Assembly
Product Information
The Prefabricated Gate Jumper Assembly with Ground Leads is a product designed for situations where nVent ERICO Cadweld connections cannot be made to aluminum pipe or thin-wall steel tube. The jumper conductor is insulated, and the assembly includes stainless steel hardware. It is available in either left or right-hand orientation, with the left-hand version being shown in the diagram.
- Catalog Number: A239EC2S242G8LH
- Material: Copper, Stainless Steel 18-8 (EN 1.4305), Stainless Steel 304 (EN 1.4301)
- Finish: Tinned
- Orientation: Left Hand
- Fixed Gate Diameter, Nominal: 2 1/2
- Fixed Gate Diameter, Actual: 2.88
- Post Frame Diameter, Nominal: 1 1/2
- Post Frame Diameter, Actual: 1.90
- Jumper Conductor Size: 4/0 Stranded
- Jumper Length: 24 inches
- Ground Lead Conductor Size: 2/0 Stranded
- Ground Lead Length: 8 feet
Product Usage Instructions
This product is designed for use in situations where nVent ERICO Cadweld connections cannot be made to aluminum pipe or thin-wall steel tube. It is important to follow the instructions carefully to avoid product malfunction, property damage, serious bodily injury, or death. The product should only be installed and used as indicated in nVent’s product instruction sheets and training materials, which are available at www.nvent.com and from your nVent customer service representative.
When installing the Prefabricated Gate Jumper Assembly with Ground Leads, follow these steps:
- Identify the left-hand or right-hand orientation required for your application.
- Ensure that the fixed gate diameter matches the nominal or actual size of your gate, and that the post frame diameter matches the nominal or actual size of your post.
- Connect the jumper conductor to your fence using the included stainless steel hardware.
- Connect the ground lead to a suitable grounding point using the included stainless steel hardware.
- Make sure that all connections are secure and properly tightened.
It is important to note that this product is not suitable for all applications. If you are unsure whether the Prefabricated Gate Jumper Assembly with Ground Leads is appropriate for your needs, please consult with an expert or contact nVent customer service for assistance.
CATALOG NUMBER
A239EC2S242G8LH
FEATURES
- Ideal for when nVent ERICO Cadweld connections cannot be made to aluminum pipe or thin-wall steel tube
- Jumper conductor is insulated
- Stainless steel hardware included
- Available in either left or right-hand orientation
PRODUCT ATTRIBUTES
- Material : Copper;Stainless Steel 18-8 (EN 1.4305);Stainless Steel 304 (EN 1.4301)
- Finish : Tinned
- Orientation: Left Hand
- Fixed Gate Diameter , Nominal: 2 1/2″
- Fixed Gate Diameter, Actual : 2.88″
- Post Frame Diameter , Nominal : 1 1/2″
- Post Frame Diameter , Actual : 1.90″
- Jumper Conductor Size : 4/0 Stranded
- Jumper Length : 24″
- Ground Lead Conductor Size : 2/0 Stranded
- Ground Lead Length : 8′
ADDITIONAL PRODUCT DETAILS
“Fixed gate” refers to the pipe on the fence itself, while “post frame” refers to the post on the swinging door. Left hand orientation shown in diagram
DIAGRAMS
A239-EB-2S-24-2Q-4-RH
A239| Series|
EB
|
Clamp Code
| EB = 2 1/2″ Gate, 1 1/4″ Post EC = 2 1/2″ Gate, 1 1/2″ Post FB = 3″ Gate, 1 1/4″ Post
FC = 3″ Gate, 1 1/2″ Post
GB = 3 1/2″ Gate, 1 1/4″ Post GC = 3 1/2″ Gate, 1 1/2″ Post HB = 4″ Gate, 1 1/4″ Post
HC = 4″ Gate, 1 1/2″ Post
2S| 4/0 AWG Flexible Jumper Designation|
24| Jumper Length (inches)|
2Q
|
Ground Lead Cable Code (AWG)
| 2C = 1/0 Stranded 2G = 2/0 Stranded 2Q = 4/0 Stranded
9F = Copper-Clad Steel #9, 19-Strand
4| Ground Lead Length (feet)|
RH
|
Ground Lead Side
| LH = Left Hand RH = Right Hand
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent customer service
representative. Improper installation, misuse, misapplication or other failure
to completely follow nVent’s instructions and warnings may cause product
malfunction, property damage, serious bodily injury and death and/or void your
warranty.
North America
- +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europe
- Netherlands : +31 800-0200135
- France: +33 800 901 793
- Germany : 800 1890272
- Other Countries : +31 13 5835404
Our powerful portfolio of brands : nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER
2022 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>