M7 plus Midea Robot Vacuum Cleaner Instruction Manual

M7 plus Midea Robot Vacuum Cleaner

PLEASE READ THE MANUAL CAREFULLY BEFORE USING AND KEEP IT PROPERLY FOR FUTURE USE

Warning notices : Before using this product, pleaseread this manual carefully and keep it for future reference. The design and specifications are subject to change without prior notice for product improvement. Consult with your dealer or manufacturer for details.

SAFETY INSTRUCTIONS

Warning for the machine

1. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

2. Plug must be removed from the socket-outlet before cleaning or maintaining the appliance. Switch off before cleaning or maintaining the appliance.

3. If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

4. WARNING : For the purposes of recharging the battery, only use the detachable docking station provided with this appliance. Use only with DC2113 docking station.

5. This appliance contains batteries that are only replaceable by skilled persons.

6. Do not bring the smart robot close to heatsource, radiation or burning cigarette butts. It is strictly forbidden to vacuum the following objects:

7. All liquids such as water and solvents;

8. Lime, cement dust and other construction dust and garbage;

9. Heat generating objects, such as unextinguished carbon butts, cigarette butts;

10. Sharp fragments, such as glass, etc.;

11. Flammable and explosive items, such as gasoline and alcohol products

12. Before using, please remove all fragile items from the ground (such as glasses, lamps, etc.), and items that may be tangled with the side brush, Roller brush and drive wheels(such as wires, curtains and other easily-entangled materials).

13. Please pay attention to your hair and avoid entanglement on wheels or roller brushes when using, cleaning and maintaining the robot.

14. Do not use this product at an altitude of more than 2000m.

15. Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

16. Warranty Information The manufacturer provides warranty in accordance with the legislation of the customer’s own country of residence, with a minimum of 1 year (Germany: 2 years), starting from the date on which the appliance is sold to the end user. The warranty only covers defects in material or workmanship. The repairs under warranty may only be carried out by an authorized service centre. When making a claim under the warranty, the original bill of purchase (with purchase date) must be submitted.
    The warranty will not apply in cases of:

17. Normal wear and tear

18. Incorrect use, e.g. overloading of the appliance, use of non-approved accessories

19. Use of force, damage caused by external influences

20. Damage caused by non-observance of the user manual, e.g. connection to an unsuitable mains supply or non-compliance with the installation instructions

21. Partially or completely dismantled appliances

22. WIFI:2400-2483.5MHz, MAX POWRE:20dBm, BLUETOOTH MAX POWR:10dBm To satisfy RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation.To ensure compliance, operations at closer than this distance is not recommended.

23. CLASS 1 LASER PRODUCT INVISIBLE LASER RADIATION
    ( Note :Laser classified to Class 1 according to IEC 60825-1:2014)

Warning for docking station

1. “IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS” and “DANGER – TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS”.
2. This appliance can be used by children aged from 8 vears and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
3. Plug must be removed from the socket-outlet before cleaning or maintaining the appliance. Switch off before cleaning or maintaining the appliance.
4. If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.
5. Docking base is only applicable to the product M7 plus. (Battery pack type : Li-ion, DC 14.4 V, 5200 mAh) The Docking base will automatically start charging after Robot Vacuum Cleaner returned to the base.
6. Warning : The battery charger(Docking station) is not intended to charge non-rechargeable batteries.

Warning for battery

1. The product must be powered off before removing the battery.
2. Please note that do not disassemble the battery by yourself.
3. If you need to replace it, please contact the after-sales service center.
4. Please dispose of used battery according to local laws and regulations.
5. Do not dismantle, open or shred the battery.
6. Do not expose batteries to heat or fire. Avoid storage in direct sunlight.
7. Do not short-circuit a battery.
8. Do not store batteries haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by other metal objects.
9. Do not subiect batteries to mechanical shock.
10. In the event of a leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
11. Do not use any charger other than that specifically provided for use with the eguipment.
12. Do not use any battery which is not designed for use with the equipment.
13. Do not mix different manufacture, capacity, size or type within a device.
14. Keep batteries out of the reach of children.
15. Seek medical advice immediately if the battery has been swallowed.
16. Keep batteries clean and dry.
17. Do not leave a battery on prolonged charge when not in use.
18. After extended periods of storage, it may be necessary to charge and discharge the batteries several times to obtain maximum performance.
19. The batteries give their best performance when they are operated at normal room temperature (20 °C ‡ 5 °C).
20. Retain the original product literature for future reference.
21. The battery may be irreversibly damaged if the battery is in low power for a long time. It is recommended that the battery retain sufficient power before storage.

TECHNICAL DATA

1. Product Model : M7 plus
2. DHost Charging Voltage : 16.7V
3. Host Rated Voltage : 14.4V
4. Host Rated Power : 55W
5. Docking Station Model : DC2113
6. Docking Station Input : 100-240V~,50-60Hz,24W
7. Docking Station Output : 16.7V ,1A
8. Battery Model : BP14452B
9. Battery Rated Voltage : 14.4V
10. Battery Capacity : 5200mAh 74.88Wh
11. Charging Limit Voltage: 16.8V

Note : you can also view the instructions on the app

STRUCTURE OF THE PRODUCT

Assembly and parts description

Parts list

PRODUCT OPERATION

Function of Buttons

Start/Pause/Shut Down

• Start :Press and hold for 3s to hear a startup voice then the machine turns on.
• Pause :Short press the button and the machine will stop. Press again, the machine will start work again.
• Shut Down :Please remove the machine from the charging base then press and hold ****the  button for 3s to hear a shutdown voice and the machine will turn off.

Wi-Fi networking Wi-Fi
Press for 3 seconds for Wi-Fi pairing. Robot is in matching status if light is flickering.

Recharge
Short press for recharging.

Reset
Press “Reset” to restart the robot when it is out of work.

Installing the Side Brushes

1. Turn the unit over.
2. With unit upside down, align side brush over brush post. Please keep the color of side brushes’ same as each brush post’s.
3. Press down side brush until it snaps in place.
4. Ensure side brushes can rotate freely.
5. Reference to fig1.

Charging Robot Vacuum

1. Put the charging base well : Place the charging base against a wall and remove all of obstructions around the charging base, as shown in the figure below.
2. Please do not place the charging base on a carpet and keep the area dry.Also help to remove the mopping holder when it is charging.
3. Turn the power switch on.

NOTE
To effectively extend battery life, you should:

1. Please charge before first use;
2. When the battery is low power, please charge it as soon as possible;
3. If you do not use the appliance for an extended period of time, fully charge the battery and put it in a ventilated and dry place;
4. Charge the robot every 3 months if it is not used for a long time to protect battery;
5. This machine has automatic recharge function. In some special cases (such as battery is dead, the machine is stuck, etc.), the main unit may not be able to automatically recharge.

Cleaning

Please clean up the wires and sundries scattered on the ground and remove valuable, frogile items that are easy to fall before cleaning. If there is a suspended environment in the clean area, please use objects to fix and block to avoid any potential harm.

It is recommended to follow the sweeping robot to find some possible problems during the first cleaning process. The robot can clean much more smoothly after that. If certain special areas do not need to be cleaned or the robot may be trapped, you can add a restricted area or virtual wall on the map in the APP to prevent the robot from entering the above special area.

NOTE
Do not use your robot on wet surfaces or surfaces with standing water. Before using the product on a rug with tasseled edges,please fold the rug edges under.

Mopping

1. Attach mopping cloth to the mopping holder.
2. Press the button on tank and pull to remove.
3. Fill the Water.
4. Attach mopping holder to the water tank.
5. Re-insert the water tank assembly into the vacuum.
6. Press ” ” to start mopping.

NOTE

1. a. Please do not fill the water more than the “Max” level.
2. b. It is recommended to use clean water in the water tank. Do not use any detergent in the water.
3. c. Please clean the mopping cloth after cleaning
4. d. You will hear a click sound when the water tank is installed properly.
5. e. Move the mopping holder when the robot is under charging.
6. f. Please set virtual wall by APP or roll up the carpet if you don’t want the robot go on your carpet operating mopping.
7. g. Please adjust water flow by APP according to your requirement.

Using APP

NOTE
If your home WiFi name or password is changed, you will need to re-establish connection with your robot vacuum.

• App supports iOS 9.0 and above, Android 6.0 and above phone system versions, but Pad device is not accepted; generally the phone system version may be checked by clicking “Settings-About Mobile Phone” in the mobile phone;
• This model does not support WEP encrypted router;
• The network accessing configuration of the cleaner requires WiFi network of 2.4GHz frequency range, 5GHz frequency range is not currently compatible;
• WiFi is mandatory for network accessing configuration of the cleaner; once the network accessing is configured successfully, App may be operated in WiFi/2G/3G/4G network environment and the cleaner may be controlled remotely;
• If your home WIFI password is changed, the cleaner will be displayed off-line on App; Without any changes of App account number, one just needs to configure network accessing for the cleaner once again;
• If others want to use App to operate same cleaner, they need be invited on App by the device owner by sharing the device to the new user’s account (on the condition that the invitee has downloaded App and registered an account);
• The device will be removed from the former device owner’s device list if a new account owner connect the device successfully;
• Once the cleaner is configured successfully network accessing, the following operations will result in clearance of WiFi settings and secondary network accessing configuration is required; Long press the network accessing configuration key on the device over 3 seconds and after a tick sound is heard, all Wi-Fi information will be cleared.

1. Ensure mobile phone is connected to your home WiFi.
2. Download the MSmartHome app and register your vacuum:
3. a. Scan the QR code or search for the MSmartHome app in the Apple or Google Play store. Download the app.
4. b. Open the app and create your personal account. Follow instructions on the screen.
5. Add your robot vacuum to your app. Press the ” + ” button on the main screen of the app and select M7 plus from the available list of products.
6. Connect your robot to your WiFi. After assembling and powering on the robot. press and hold down the “WiFi” button for 3 seconds until a beep is heard. The WiFi indicator light should start to flicker. Follow instructions on app for next steps.

NOTE
Once the network access is configured successfully, you will be the owner of this cleaner and can operate your intelligent cleaner by accessing to cleaner operating interface

MSmartHome App Quick Guide

NOTE
If the Wi-Fi in your home is unstable, it may cause a certain delay in the related operations of the MSmartHome App. (The content of the MSmartHome App is subject to change with the product technology update. Please refer to the MSmartHome interface for details.)

MAINTENANCE

Cleaning the Side Brush

1. Regularly check the side brush for hair wrapping.
2. Clean the side brush with the cleaning tool or a rag.
3. If the side brush has deformed from hair wrap,remove the side brush by pulling it off the vacuum and place. it in warm water for 5 seconds.
4. If the side brush is permanently damaged, replace with the spare set of brushes.

Cleaning the Dustbin, Sponge and Filter
Empty the dustbin after each use

1. Press dustbin release button to remove dustbin from robot.
2. Press dustbin release button to empty into a trash bin.
3. Filter mesh is on the side of dustbin. Please keep filter and sponge totally dry before using.
4. Have dustbin inserted back to robot.

Cleaning the Water Tank

1. Once finished mopping, press the water tank release button and pull to remove the water tank. Detach the mop holder by pulling them apart.
2. Wash the mopping pad and dry THOROUGHLY.
3. Open the cover and pour out the remaining water in the water tank.
4. Wipe dry the water tank. Exposure to sunlight is not recommended.

Cleaning the Sensor and Wheel
Wipe the sensor and wheels gently with a soft cloth, as shown in the right figure.

Cleaning the Charge Terminal
Wipe the charging terminals on both the robot and charging dock with a soft cloth, as shown in the right figure.

Cleaning the Brushroll

1. Pull the middle area of brush roll to take part it.
2. Brush roll can be apart by pulling its middle part.Then you can clean threads or hair wrapped around the brush roll by scissors or included brush cleaner.

NOTE
If side brushes are curled, you can remove ther and then let it thoroughly dry. Also regularly us and hair from the side brushes. Brushroll fran lifting out. When put it back, make sure the sir

FAQs

In case of malfuntion, please refer to the following table.

In case of malfunction, please refer to the following table.

References

• Midea - Make yourself at Home - World's Number 1 Appliance Producer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>