warmiplanet WICF03-1 Ceiling Fan with Light Installation Guide

warmiplanet WICF03-1 Ceiling Fan with Light

Product Information

The product is a ceiling fan with a light kit. It comes with a remote control for controlling the light and fan functions. The light kit can be fixed to the fan using screws, and the light cover can be rotated until fixed. The power cord of the light kit needs to be connected to the light kit receiver. The remote control has options for controlling the light and fan functions, with options for choosing the color temperature of the light, operating the fan at different speeds, setting a timer for automatic shut-off, and controlling the direction of the fan. The installation process involves fixing the mounting plate to the ceiling, attaching the downrod and fan blades to the motor, and connecting the wires of the fan and receiver.

Product Usage Instructions

1. Fix the mounting plate to the ceiling using machine screws for the concrete ceiling or wood screws for the wooden ceiling.
2. Remove the fixing screws for the light kit and loosen the screws of the coupler.
3. Remove the fixing screws for the fan blades.
4. Pull out the R-pin from the rod.
5. Put the wires and two canopies through the downrod.
6. Insert the cross pin and fix it with R-pin.
7. Connect the same color wires of the fan and receiver.
8. Connect the receiver to the home wires. White for neutral wire, black for live wire, and green for ground wire.
9. Tighten the screws of the coupler and cover it with a down canopy.
10. Loosen two opposite screws and hang the fan on the hanging bracket, aligning the slot on the downrod with the bulge on the hanging bracket.
11. Align the hole between the blade and holder, and attach the blade holder bracket with screws and washers.
12. Install the blades and tighten the screws.
13. Fix the light kit with screws and connect the power cord to the light kit receiver.
14. Rotate the light cover until fixed.
15. Use the remote control to operate the light and fan functions. Press the ON/OFF button continuously to change the color temperature. To turn on the light with the same color temperature as last time, turn it back on more than 7 seconds after turning it off. If the remote control does not work, press and hold the middle and low buttons at the same time within 5 seconds after the product is powered on until you hear two beeps to succeed.

NOTE

• PRESS THE ON/OFF BUTTON CONTINUOUSLY TO CHANGE THE COLOR TEMPERATURE . TURN BACK ON THE LIGHT MORE THAN 7 SECONDS AFTER TURN OFF THE LIGHT , THE COLOR TEMPERATURE WILL BE THE SAME AS LAST TIME.
• IF THE REMOTE CONTROL CANNOT BE USED NORMALLY, PLEASE PRESS AND HOLD THE MIDDLE AND LOW BUTTONS AT THE SAME TIME WITHIN 5 SECONDS AFTER THE PRODUCT IS POWERED ON, UNTIL YOU HEAR TWO BEEPS TO SUCCEED.IF IT DOESNT WORK. PLEASE TRY AGAIN

WHAT IN BOX

ASSEMBLING

1. For the concrete ceiling, install the mounting plate to the octagon box with two machine screws
2. For the wooden ceiling, install the mounting plate to the wooden ceiling with two wood screws.
3. Remove the 4 fixing screws for the light kit.
4. Remove the 8 fixing screws for the fan blades.
5. Loosen the 2 screws of the coupler.
6. Pull out the R-pin from the rod.
7. Put the wires and the two canopies through the downrod
8. Insert the cross pin and fix it with R-pin.
9. Tighten the 2 screws of the coupler.
10. Cover the coupler with down canopy.
11. Loosen the two opposite screws
12. Hang the fan on the hanging bracket and align the slot on the downrod with the bulge on the hanging bracket
13. Connect the same color wires of the fan and receiver.
14. Connect the receiver to home wires. Black for Live wire, White for neutral wire, Green for ground wire.
15. Rotate the up canopy.
16. Tighten the two screws
17. Align the hole between blade and holder
18. The other side,fix the blade holder bracket with screws and washers.
19. Install the blades，tighten the screws
20. Fix the light kit with the screws.
21. Connect the light kit power cord to the light kit receiver
22. Rotate the light cover until fixed.

REMOTE CONTROL

tommy@warmiplanet.com.cn

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>