warmiplanet WICF01 Ceiling Fan Installation Guide

October 30, 2023
Warmiplanet

warmiplanet WICF01 Ceiling Fan Installation Guide
warmiplanet WICF01 Ceiling Fan

PACKAGE CONTENTS

  1. Motor
    Package Contents

  2. Hanging Bracket

  3. Up Canopy

    1. Blades
      Package Contents
  4. Down Rod

  5. Down Canopy

INSTALLATION INSTRUCTION

Step 1 For concrete ceiling,install the mounting plate to octagon box with two machine screws
Installation Instruction
Step 1 For wooden ceiling,install the mounting plate to wooden ceiling with two wood screws.
Installation Instruction
Step 2 Remove the 3 fixing screws for the light kit.
Installation Instruction
Step 3 Loosen the 2 screws of the coupler.
Installation Instruction
Step 4 Pull out the R-pin from the rod
Installation Instruction
Step 5 Put the wires and the two canopies through the downrod
Installation Instruction

Step 6 Tighten the 2 screws of the coupler.
Installation Instruction
Step 7 Cover the coupler with down canopy.
Installation Instruction
Step 8 Loosen the two opposite screws
Installation Instruction
Step 9 Hang the fan on the hanging bracket and align the slot on the downrod with the bulge on the hanging bracket.
Installation Instruction
Step 10 Connect the same color wires of the fan and receiver.
Installation Instruction
Step 11 Connect the receiver to home wires Black for Live wire, White for neutral wire, Green for ground wire
Installation Instruction

Step 12 Rotate the up canopy and tighten the screws.
Installation Instruction
Step 13 Install the blades,tighten the screws.
Installation Instruction
Step 14 Fix the light kit with the screws.
Installation Instruction
Step 15 Connect the light kit power cord to the light kit receiver.
Installation Instruction
Step 16 Rotate the light cover until fixed.
Installation Instruction

REMOTE CONTROL

Remote Control

NOTE

  1. PRESS THE ON/OFF BUTTON CONTINUOUSLY TO CHANGE THE COLOR TEMPERATURE TURN BACK ON THE LIGHT MORE THAN 7 SECONDS AFTER TURN OFF THE LIGHT , THE COLOR TEMPERATURE WILL BE THE SAME AS LAST TIME
  2.  IF THE REMOTE CONTROL CANNOT BE USED NORMALLY, PLEASE PRESSAND HOLD THE MIDDLE AND LOW BUTTONS AT THE SAME TIME WITHIN 5 SECONDS AFTER THE PRODUCT IS POWERED ON, UNTIL YOU HEAR TWO BEEPS TO SUCCEED.IF IT DOESNT WORK. PLEASE TRY AGAIN.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals