SENBENBAO I12 True Wireless Stereo Earphone User Manual

earphones

FCC ID: 2BBAA-I12

Specifications

True wireless stereo(TWS),real no wires design,individual left and right channel HIFI sound,both the left and right earbud are bluetooth enabled, could be used separately,or used as one pair,

dock:300mah(optional)
Talk/Play time:| Headphone playback time:2-3 hours
Headphone talk time approx:4 hours
Standby time:| Both ears can stand for 60 hours

Headphone use steps and special instructions

1. Turn on the charging box switch (blur or red light is on)
2. Open the top cover of the charging box and take out the earphones. (Important note: Turn on the charging box switch before opening the charging box, which is the premise of the headset automatically turning on )
3. Pair with other devices: Open the phone or other device Bluetooth settings. search for the Bluetooth name, click to connect to Bluetooth.
4. The headset is placed in the charging box to enter the charging mode, and the headset is automatically turned off.
5. Tws wiroless headphones can be connected separately and separately toother Bluetooth devices.
6. Tws wrelss headset will automatically shut down if is not connected to the Bluetooth device for 5 minutes.

Headphone touch function description

1. The left ear the right ear touch the position,touch 1 to answer the calltheleft earphone touches 2 times and the volume decreases,the right earphonetouches 2 times,the left ear presses 3 next,and the right clicks 3 times,Lastsong long press 3 seconds siri function,long press 5 seconds to switch on andoff,two headphones simultaneously report when calling.
2. After turning off the phone,the headset will automatically connect back to the phone;
3. The whole machine has voice prompts;
4. The earphones have sounds for the left and right ears of the two-channelconversation;
5. Headphone music playback time is about 2-3 hours,talk time is about 4 hours,and standby time is about 6 hours;
6. The charging battery capacity is 300AH, and the headphone battery capacity is35mAh;
7. Charging time is 70 minutes;
8. Charging box charging voltage 5V;
9. The charging box lakes 1 hour,the charging box has a capacity of 300 mAh,andthe charging red light flashes constantly;
10. The charging box can charge the earphone for about 4 times;
11. When the earphone is charging,the red light is always on,and the full light is of;
12. When the charging box is charging the earphone ,the blue light is always on.

Warnings

1. Please do not overuse this earphone keep away from wet and heat. or putit under heavy pressure,
2. Keep away from WIFI, router or other high frequency transmitting equipment to prevent interrruption of signal receiving.
3. Please use this earphone under its working range(10-15m), and the effect would be better if there is no obstacle between the connected devices.
4. Use this Bluetooth earphone to connect any device with Bluetooth function

Any Changes expressly or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>