SENBENBAO PRO4 True Wireless Stereo Earbuds User Manual

: May 21, 2024
: SENBENBAO

Table of Contents

Specitication
Product Instructions

SENBENBAO PRO4 True Wireless Stereo Earbuds User Manual

Specitication

Support Agreement:	A2DP13/HFP1.6/HSP1. 2 I
Bluetooth frequency:	/AVRCP1.6/0113
Bluetooth transmission distance:Ill	2.4GHz
Battery capacity:	10-15m 7.
Standby tim	30mAh
Playing /Talking time:	2-2.5hours
Charging box capacity:	260mAh

Product Instructions

Operation steps Bilateral use: Open the top cover of the charging box and press the multi-function key of the charging box to turn on. Take out the headphones. The headphones automatically turnon – – the Once, the main ear flashed red and blue, and the auxiliary ear went out. Headphones and mobile phones Yes: The headset flashes red and blue alternately to indicate that it needs to be paired with Bluetooth. Turn on the phone Set to open Bluetooth, search for the Bluetooth name ” pro ” and click to connect on the phone,The light turns off after connection.
Steps to turn on and off the charger headset Take out the earphones to automatically turn on, put the earphones into the charging compartment to automatically turn off, and The headset is automatically turned off after the clock is disconnected. Charging compartment: press the multi-function button to open,The orange indicator light is always on, press the multi-function button to turn off, and the green indicator light is off.
Charging instructions When charging the charging compartment, the orange light flashes until it stays on, and when it is fully charged, the green light stays on Turns off when the chargig bin is charging the earphones. The orange light in the charging compartment is always on, The red light in the headset is always on. After flashing,The red light in the headset is always on. After flashing, the charging compartment and earphone indicator lights go out.

Product schematic diagram

Product operation instyrcutions

The last song| Long press on the right to add, long press on the left to subtract
---|---
The next| Double-click on the right for the previous song, double-click on the left for the next song
Play /Pause Dialing| Click normal
Answer the phone| Click the button during a call
Refusing the phone| Press for 2 seconds to talk time
Sini function| Long press for 2 seconds to beep
Headphone pairing| The headset is automatically paired out of the warehouse

Precautions

The earphones should be stored in a dry and ventilated environment, to avoid oil, water, moisture and dust affecting product performance.
Avoid using stimulus, organic solvents or items containing these ingredients to clean the earphone.
The use of earphones should be correctly as per the specification, pay attention to use the influence of environment on the earphones. In order to ensure the smooth connection, it’s recommended that the distance between the earphones and phones within 10 meters.
If the earphones failed to connect or with poor connection, pls do not take apart the earphones or the accessories on your own, Otherwise, no warranty
Regarding charging earphones. Pls use the standard usb cable or pointed charging cable from our company to charge the earphones.
In order to ensure normal use, please ensure suficient power of the earphones.

Any Changes expressly or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment . This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Exposure Statement