VAN GUARD ULTI Rack Roof Racks Instruction Manual
- October 30, 2023
- VAN GUARD
Table of Contents
IN8315
ULTI Rack+
Instruction Manual
ULTI Rack Roof Racks
Fitting Instructions – Read instructions carefully before fitting and follow them for correct use
Customercare@van-guard.co.uk
UK +44 (0) 1392 368 351
THIS INSTRUCTION COVERS THE FOLLOWING MODELS – CHECK YOU ARE FITTING THE CORRECT MODEL BEFORE PROCEEDING
VGUR-244
Nissan NV400: 2010-2021
Nissan Interstar: 2022 on
Renault Master: 2010 on
Vauxhall Movano: 2010-2021
L2H2 (MWB)
Twin Rear Doors
TOOLS REQUIRED
Loosely secure the front internal brackets. Where a sliding door is present
remove the 2X star drive screws, place bracket in position and refit star
drive screws as shown in fig.1. (Do not remove door rail bracket).
Where a sliding door is not present insert the M6 1/4 turn nut inserts into
the positions shown in fig.2. Then place the bracket in position and loosely
bolt into the inserts using M6x20 bolts and M6 washers.
This FITTING INSTRUCTION is the property of VAN GUARD ACCESSORIES LTD. and
must not be used for manufacturing purposes, copied nor communicated in any
way to third parties without written permission from VAN GUARD ACCESSORIES
LTD.
IN8315_A (CN:NR)
Van Guard Accessories Ltd
Fair Oak Close, Exeter Airport Business Park,
Exeter, Devon, EX5 2UL
www.van-guard.co.uk