VAN GUARD IN8400 ULTI Ladder Instruction Manual
- October 30, 2023
- VAN GUARD
Table of Contents
VAN GUARD IN8400 ULTI Ladder
Product Information
IN8400 ULTI Ladder
The IN8400 ULTI Ladder is a product made by Van Guard Accessories Ltd. It is designed to fit specific models of vans, including Citroen Dispatch, Fiat Scudo, Peugeot Expert, Toyota Pro-Ace, and Vauxhall Vivaro. This product comes with a set of fitting instructions, which should be read carefully before fitting and followed correctly to ensure proper use.
Tools Required
- 13mm wrench x 1
Supplied Components
Before proceeding with the fitting, make sure to check that all parts are present and correct. The supplied components include:
- AS3592 x 1
- FX4249 x 8 (M8X40)
- FX4250 x 10 (M8X25)
- ME1947 x 1
- 4mm allen key x 1
- FX4240 x 18 (M8)
- FX4241 x 8
- ME1920 x 1
- 9mm wrench x 1
- MA6200 x 2
- MA6203 x 1
- ME1923 x 1
- FX4008 x 1
- ME1905 x 2
- ME1906 x 2
- FX4252 x 2
- ME1924 x 1
Product Usage Instructions
- Make sure you have the correct model of the IN8400 ULTI Ladder that fits your van.
- Read the fitting instructions carefully before proceeding with the installation.
- Check that all the supplied components are present and correct before starting the fitting process.
- Use the 13mm wrench to tighten all M8X40 screws (FX4249) to 12Nm torque.
- Use the 4mm allen key to tighten all M8 screws (FX4240) to 12Nm torque.
- Use the 9mm wrench to tighten all MA6200 nuts to 12Nm torque.
- Use the 9mm wrench to tighten MA6203 nut to 12Nm torque.
- Use the 4mm allen key to tighten ME1920 screw to 12Nm torque.
- Use the 9mm wrench to tighten ME1923 bolt to 12Nm torque.
- Use the 4mm allen key to tighten FX4008 screw to 112Nm torque.
- Use the 9mm wrench to tighten ME1924 bolt to 12Nm torque.
- Check all fittings and connections to ensure they are properly secured and tightened.
Note: If you have any questions or issues with the fitting process, please contact Van Guard Accessories Ltd at customercare@van- guard.co.uk or call UK +44 (0) 1392 368 351.
THIS INSTRUCTION COVERS THE FOLLOWING MODELS CHECK YOU ARE FITTING THE CORRECT MODEL BEFORE PROCEEDING
SUPPLIED COMPONENTS – CHECK ALL PARTS ARE PRESENT AND CORRECT BEFORE PROCEEDING
INSTALLATION
Customercare@van-guard.co.uk UK +44 (0) 1392 368 351
This FITTING INSTRUCTION is the property of VAN GUARD ACCESSORIES LTD. and
must not be used for manufacturing purposes, copied nor communicated in any
way to third parties without written
permission from VAN GUARD ACCESSORIES LTD.
IN8400_A (CN:NR)
Van Guard Accessories Ltd
Fair Oak Close, Exeter Airport Business Park, Exeter, Devon, EX5 2UL
www.van-guard.co.uk
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>