VAN GUARD IN8313 ULTI Rack+ Van Roof Racks Instruction Manual
- October 30, 2023
- VAN GUARD
Table of Contents
VAN GUARD IN8313 ULTI Rack+ Van Roof Racks
Product Information: IN8313 ULTI Rack+
The IN8313 ULTI Rack+ is a roof rack system designed for the Fiat Doblo (2010 onwards) and Vauxhall Combo (2012-2018) with L1H1 (SWB) twin rear doors. It has a maximum weight capacity of 100kg and is supplied with various components for proper installation. This product is the property of Van Guard Accessories Ltd.
Product Usage Instructions
- Before fitting the rack, read the fitting instructions carefully and ensure that you have the correct model.
- Check that all the supplied components are present and correct before proceeding with installation.
- You will need a 10mm and 13mm tool, as well as the components listed in the supplied components section.
- Refer to the diagram on page 2 of 14 to identify the location of each component during installation.
- Tighten all crossbars to 20Nm using the appropriate torque wrench.
- After installation, ensure that the rack is secure and does not interfere with the vehicle’s operation.
Fitting Instructions
- Read instructions carefully before fitting and follow them for correct use.
[email protected]
UK +44 (0) 1392 368 351
This FITTING INSTRUCTION is the property of VAN GUARD ACCESSORIES LTD. and must not be used for manufacturing purposes, copied nor communicated in any way to third parties without written permission from VAN GUARD ACCESSORIES LTD.
Van Guard Accessories Ltd Fair Oak Close, Exeter Airport Business Park,
Exeter, Devon, EX5 2UL
www.van-guard.co.uk
THIS INSTRUCTION COVERS THE FOLLOWING MODELS
- CHECK YOU ARE FITTING THE CORRECT MODEL BEFORE PROCEEDING.
SUPPLIED COMPONENTS
- CHECK ALL PARTS ARE PRESENT AND CORRECT BEFORE PROCEEDING.
INSTALLATION
