Montgomery T106-WG Wood Black Table Lamp Set With USB Instruction Manual
- October 30, 2023
- Montgomery
Table of Contents
Montgomery T106-WG Wood Black Table Lamp Set With USB
Product Information
The product is a T106 lamp kit that includes the following parts:
- A body (part A)
- A lamp socket (part B)
- A saddle (part C)
- A harp (part D)
- A shade (part E)
- A finial (part F)
Product Usage Instructions
- Unpack all parts from cartons carefully.
- Carefully pull-out excess power cord from the lamp base while assembling to prevent the cord from becoming twisted.
- Place the harp (part D) onto the saddle (part C).
- Insert the lamp socket (part B) into the body (part A).
- Place the shade (part E) onto the harp (part D).
- Tighten the finial (part F) into the harp (part D) until tight.
- Insert a light bulb into the lamp socket (part B).
- Plug in the lamp and turn it on.
Note: Use a light bulb that is compatible with the lamp socket and within the recommended wattage range.
Assembly & Installation Instructions
Dear Customer:
Thank you for your business! If you have any question or problem, please send
us an email to [email protected] o
call us at 870-949-8466. We will do everything possible to make you completely
satisfied with your purchase. Product reviews help future customers to make
their purchase decision. You are encouraged to share your experience by
leaving a short product review on the platform where you bought this product.
Thank you!
Zgear Team
Warning: If any special control devices are used with this fixture,
follow the instructions carefully to assure full compliance with N.E.C
requirements. If there are any questions, contact a qualified electric
contractor.
Warning: California Residents Proposition 65 This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
Caution: It is highly recommended to get an electrician to install this light. Please make sure to turn the electricity off at the main circuit breaker before beginning installation. All glass is fragile. Use care when handling glass component(s) and/or lamp(s)
- Unpack all parts from cartons carefully.
- Carefully pull-out excess power cord from the lamp base while assembling to prevent the cord from becoming twisted.
- Place the harp(D)onto the saddle(C).
- Place the shade(E)onto the harp(D).
- Tighten the finial(F)into the harp(D)until tight.
WIRE CONNECTION DIAGRAM
Wires meeting safety standards are required to connect the electical circuit
CAUTION: Risk of fire Please read all instructions carefully. Before you proceed to install, make sure that the power supply is turned off and remains off until installation is completed.
PARTS INCLUDED
MADE IN CHINA