dji MT2SS52010 Mini SE Drone User Guide

dji MT2SS52010 Mini SE Drone

Quick Start

DJI Mini SE features Obstacle Sensing and Infrared Sensing System*, and a fully stabilized 3-axis gimbal with a 1/2.3” CMOS sensor camera that shoots 2.7K video and 12-megapixel photos.

1. Gimbal and Camera
2. Power Button
3. Battery Level LEDs
4.  Downward Vision System
5. Infrared Sensing System
6. Motors
7. Propellers
8. Antennas
9. Battery Cover
10. Charging/Upgrading Port (USB-C)
11. microSD Card Slot
12. Aircraft Status Indicator

• The Vision Systems and Infrared Sensing Systems are affected by surrounding conditions. Read the Disclaimer and Safety Guidelines and watch the tutorial in the DJI Fly app or on the official DJI website to learn more. http://www.dji.com/mini-se

Remote Controller

Built into the remote controller is the DJI enhanced Wi-Fi technology, offering a maximum transmission range of 2.49 mi (4 km) and video from the aircraft to the DJI Fly app on your mobile device. The detachable control sticks make the remote controller easier to store.

1. Antennas
2. Power Button
3. Removable Control Sticks
4. Battery Level LEDs
5. RTH Button
6. Video-Downlink/Charging Port (Micro USB)
7. Control Sticks Storage Slot
8. Mobile Device Clamp
9. Gimbal Dial
10. Record Button
11.  Shutter Button

• The remote controller is able to reach its maximum transmission distance (FCC) in a wide-open area with no electromagnetic Interference at an altitude of about 400 ft (120 m).

Download the DJI Fly App and Watching Tutorial Videos
Search “DJI Fly” in the App Store or Google Play or scan the QR code below to download the app on your mobile device. Watch the tutorial videos at www.dji.com/mini-se or in DJI Fly by tapping the icon in the top right corner of your screen.

Charging the Batteries

Use the provided charger to fully charge the Intelligent Flight Battery before first use.

Remove the remote controller cable before charging.

Checking the Battery Levels and Powering On/Off

Press once to check the battery level.  Press, then press and hold to turn on/off.

Preparing the Aircraft

1. Remove the gimbal cover from the camera.
2. Unfold the front arms and the propellers.
3. Unfold the rear arms and the propellers.
4. Unfolded Unfold the front arms and the propellers before the rear ones. All arms and propellers must be unfolded before takeoff.

Preparing the Remote Controller

1. Unfold the antennas and mobile device clamps, then attach the control sticks.
2. Place one end of the RC cable to the end of the slot.
3. Attach your mobile device within the clamps.

• Ensure the control sticks are firmly mounted.
• The remote controller cable with the Lightning connector is mounted by default. Use the appropriate cable for your mobile device to connect to the remote controller.

Preparing for Takeoff

1.  Power on the remote controller
2. Power on the aircraft
3. Launch DJI Fly App

Flight

Remote Controller Operation

Specifications

• Aircraft (Model: MT2SS5 / MT2SD25)****
  Weight| <249 g
  ---|---
  Max Flight Time| 30 minutes (0 wind while flying at a consistent 10.5 mph (17 kph))
  Operating Temperature| 32° to 104°F (0° to 40°C)
  Operating Frequency| OcuSync 2.0

Model MT2SS5: 5.725 – 5.850 GHz

Model MT2SD25: 2.400 – 2.4835 GHz; 5.725 – 5.850 GHz

GPS

1.57302 – 1.57782 GHz

GLONASS

1.597 – 1.607 GHz

Transmitter Power (EIRP)| Model MT2SS5

5.8 GHz: <30 dBm (FCC); <28 dBm (SRRC)

Model MT2SD25

2.4 GHz: <19 dBm (MIC/CE)

5.8 GHz: <14 dBm (CE)

• Camera****
  Sensor| 1/2.3’’ CMOS; Effective pixels: 12M
  ---|---
  Lens| FOV: 83°
   | 35mm format equivalent: 24 mm Aperture: f/2.8

Focus: 1 m to ∞

---|---
ISO Range| Video: 100-3200 (auto/manual)

Photo: 100-1600 (auto); 100-3200 (manual)

Electronic Shutter Speed| 4-1/8000 s

• Remote Controller (Model: MR1SS5 / MR1SD25)****
  Operating Frequency| Model MR1SS5: 5.725 – 5.850 GHz

Model MR1SD25: 2.400 – 2.4835 GHz; 5.725 – 5.850 GHz

---|---
Battery| 2550 mAh
Transmitter Power (EIRP)| Model MR1SS5

5.8 GHz: <30 dBm (FCC); <28 dBm (SRRC)

Model MR1SD25

2.4 GHz: <19 dBm (MIC/CE)

5.8 GHz: <14 dBm (CE)

Operating Voltage| 1200mA @ 3.6V (Android)

700mA @ 3.6V (iOS)

• Intelligent Flight Battery****
  Capacity| 2250 mAh
  ---|---
  Battery Type| LiPo 2S
  Charging Temperature| 41° to 113°F (5° to 45°C)
  Max Charging Power| 29 W

For more information, read the User Manual: http://www.dji.com/mini- se

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The aircraft complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm during normal operation. This transmitter must not be co- located or operating in conjunction with any other antenna or transmitter.
This equipment (MR1SS5) complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

References

• Anatel — Agência Nacional de Telecomunicações
• Support for Mavic 2 - DJI
• DJI Mini SE - Fly As You Are - DJI

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>