sgreen 48 Inch Washout Booth with Backlit System Instruction Manual
- October 30, 2023
- sgreen
Table of Contents
sgreen 48 Inch Washout Booth with Backlit System
Product Information
The product is a display unit available in two sizes- 48 inches and 72 inches. It comes with a plexiglass back panel and an optional backlit assembly. The unit has 1-1/2 NPT female drain and aluminum tubular cross bars.
48 Inch Unit Dimensions
- Height: 73.88 inches
- Width: 48.00 inches
- Depth: 18.74 inches
72 Inch Unit Dimensions
- Height: 73.79 inches
- Width: 72.00 inches
- Depth: 37.87 inches
Product Usage Instructions
Step 1
Install the legs uprights into the preinstalled leg clips. This will
require the provided 1/4th inch bolts, washers, and flanged nuts in the four
holes-to-slots. Use the supplied 7/16th inch wrench and hex key to attach.
Note: There are left-hand and right-hand versions of the uprights.
Step 2
Install the aluminum tubular crossbars into the lower upright slots. This
will require the provided 1/4th inch bolts and washers. Use the supplied hex
key to attach. Contact customer support at 12303 NE 56th ST, Vancouver, WA
98662 or call at 360-576-7188 for any further assistance.
48” Unit Dimensions
72” Unit Dimensions
Step 1
Install the legs uprights into the pre-installed leg clips. This will require
the provided 1/4th inch bolts, washers, and flanged nuts in the four holes-to-
slots. Use the supplied 7/16th inch wrench and hex key to attach.
Note: There are left-hand and right-hand versions of the uprights.
Step 2
Install the aluminum tubular cross bars into the lower upright slots. This will require the provided 1/4th-inch bolts and washers. Use the supplied hex key to attach.
- 12303 NE 56th ST
- Vancouver. WA 98662
- 360-576-7188
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>