Aste SR 100, SR 150 Premium Cooler User Manual
- October 30, 2023
- Aste
Table of Contents
Aste SR 100, SR 150 Premium Cooler
Product Information
The Aste premium cooler is a high-quality product designed with complete devotion to quality and positive user experience. The minimum duration of the guarantee is 12 months and covers the materials used in its production and any manufacturing defects. However, damages arising from incorrect installation or usage are not covered by the guarantee. It is recommended to locate the appliance in a spot where the temperature does not exceed +25 C and the relative humidity is no more than 60%.
Environmental Policy
The Aste premium cooler has an environmental policy that considers the environment throughout the whole lifetime of the product, from the design process through production till the final recycling. The policy includes exploring continuously the economical and effective use of new environmentally friendly materials in our products and production. The target is to minimize the use of nonrenewable natural resources. The packaging materials used for the appliance are 100% recyclable materials. It is recommended to take the product to an appropriate recycling point when you finally stop using the appliance.
Technical Information
Technical information about the Aste premium cooler can be found in the user manual provided.
Contact Us
If you need further assistance or have any questions regarding the Aste premium cooler, please contact your local service partner or get in touch with our after-sales service at +358 (0)29 7020 0150 or via e-mail: [email protected].
Product Usage Instructions
Start-Up
- Check that the packaging and appliance are intact. Notify the vendor as soon as possible of any problems with the packaging or the appliance.
- If necessary, lift the appliance correctly from its base.
- Place the appliance on an even surface indoors, avoiding direct sunlight.
- Clean the appliance externally and internally using a soft, lint-free cloth and mild detergents such as washing-up liquid. Do not use detergents that contain abrasive ingredients. Dry the appliance carefully with a lint-free cloth.
Congratulations on the purchase of your new Aste premium cooler! Our
passion is to design products with complete devotion in quality and positive
user experience. For the best results we demand You to familiarize with this
user manual with care. Even though this fine product has been designed with
great spirit and guts, it is important to use and maintain your cooler
correctly.
On behalf of a Blue Team of Aste
- Jussi Salonen
- CEO, founder
- Aste Finland Oy
General
The minimum duration of the guarantee is 12 months*. Guarantee that covers the materials used in its production and any manufacturing defects. The guarantee does not cover damage arising from incorrect installation or usage. The appliance should be located in a spot where the temperature does not exceed +25 C and the relative humidity is no more than 60%.
Environmental Policy
The basic is to consider the environment throughout the whole lifetime of our
products; from the design process through production to the final recycling.
The environmental policy includes the following aspects:
- We design energy-efficient products
- Products are designed to use natural, environment-friendly refrigerants (R600, R290)
- Materials used in production are recyclable whenever possible
- We aim to utilize recycled materials whenever possible
- Our products are packed with easily recyclable materials that support the sustainable development
- Our target on production is the minimizing, sorting, and utilization of waste
- We aim to maximize the energy efficiency of our production
- Our suppliers are evaluated by the consideration of environmental aspects
- We explore continuously the economical and effective use of new environmentally friendly materials in our products and production. Our target is to minimize the use of nonrenewable natural resources.
- We believe that considering of sustainable development when choosing materials and energy consumption brings the most benefit to us and our customers now and in the future.
Note: Look after your environment! The packaging materials used for the
appliance are 100% recyclable materials.
Note: When you finally stop using the appliance, take the product to an
appropriate recycling point.
For more information, please contact the seller, your local service partner or
get in touch with our after-sales service: +358 (0)29 7020 0150 or via e-mail:
[email protected]
Start-Up
- Check that the packaging and appliance are intact. Check the external condition of the packaging and the appliance when you remove the appliance from its packaging. Notify the vendor as soon as possible of any problems with the packaging or the appliance.
- Lift the appliance correctly. The product may be lifted, when necessary, from its base.
- Correct positioning of the appliance. The appliance is designed to be used on an even surface indoors. Avoid placing the appliance in direct sunlight!
- Clean the appliance externally and internally using a soft, lint-free cloth. Don’t use detergents that contain abrasive ingredients. Use mild detergents such as washing-up liquid. Dry the appliance carefully with a lint-free cloth.
- Checking the air inlet. Make sure that the air inlets at the bottom of the appliance are not covered.
- Connecting to a power supply. Connect the appliance to an earthed socket (10 A, 220-240/50Hz) using the power cable supplied. Avoid using extension leads.
- Operating the appliance for the first time. When connecting the appliance to the mains current, check that the appliance starts up correctly and that cold air starts to flow from the airduct. Using the electronic temperature control, you can check that the temperature has started to fall.
Usage
Electronic Controller
- Short press: No action Short press: Increase temperature
- Long press: Start manual defrosting Long press: No action
- Short press: Light ON/OFF Short press: Decrease temperature
- Long press: Power ON/OFF Long press: No action
Controller shows set point temperature in normal mode
Filling
Caution: Never pour products into the appliance.
Never pour products into the appliance! The best way to fill the appliance is
by stacking products systematically. Before transferring new items into the
appliance, make sure that their temperature does not exceed +25 C. It is
recommended that you do not add any items above the level of the air duct,
because the temperature rises quickly above this level.
Maintenance
Always disconnect the appliance from the mains before cleaning! When necessary, clean the surfaces of the appliance using a soft, lint-free cloth. For cleaning, use mild detergents that do not contain abrasive ingredients. Dry the appliance carefully with a lint-free cloth. When necessary, clean around the appliance (removing dust, paper, grit, etc.). Maintain and clean the appliance in a proper way. If the condenser coil is not cleaned at least 2 times per year, the efficiency of the appliance will decrease significantly.
Intended Use
The appliance is designed for storing and cooling packaged food and drinks. Take note of the required storage temperatures for different items of food and drink. Use of the appliance for other purposes is not recommended without consulting the manufacturer.
Technical Information
Subster® SR100
- Net weight …………………………………………………………………………….. 55 kg
- Gross volume …………………………………………………………………………. 100 l
- Net volume ………………………………………………………………………………. 95 l
- External dimension W x D x H (mm) …………………………. 650 x 450 x 1010
- Internal dimension W x D x H (mm)…………………………. 578 x 176×2 x 420
- Power input ………………………………………………. 170W (220-240V, 50 HZ)
- Defrosting ……………………………………………………………………….. Automatic
- Compressor ……………………………………………………………………….. Danfoss
- Filling quantity (g) / Refrigerant ………………………………………………. R600a
- Average consumption …………………………………………………… 3,3 kWh/24 h
- Classification ………………………………………………………………………….. 3M2*
- Temperature Range …………………………………………………….. +1ºC to +6ºC
- Factory Setting ……………………………………………………………………….. +6ºC
- Energy Class ………………………………………………………………………………. D
- Evaporator ……………………………………………………………………… Finned coil
- Condenser ……………………………………………………………. Maintenance free
- Temperature control ………………………………………………………..Electronical
Subster® SR150
- Net weight …………………………………………………………………………….. 80 kg
- Gross volume …………………………………………………………………………. 200 l
- Net volume …………………………………………………………………………….. 180 l
- External dimension W x D x H (mm) …………………………. 650 x 450 x 1490
- Internal dimension W x D x H (mm)…………………………. 380 x 260×2 x 885
- Power input ……………………………………………….. 280W (220-240V, 50 HZ)
- Defrosting ……………………………………………………………………….. Automatic
- Compressor ……………………………………………………………………….. Danfoss
- Filling quantity (g) / Refrigerant ………………………………………………… R290
- Average consumption …………………………………………………… 6,5 kWh/24 h
- Classification ………………………………………………………………………….. 3H2*
- Temperature Range …………………………………………………….. +1ºC to +6ºC
- Factory Setting ……………………………………………………………………….. +6ºC
- Energy Class ………………………………………………………………………………. C
- Evaporator ……………………………………………………………………… Finned coil
- Condenser ……………………………………………………………. Maintenance free
- Temperature control ………………………………………………………..Electronical
We strongly advise you to visit
www.astecoolers.com/products to check
the optimal storage temperatures for food and beverages. Incorrect temperature
settings may result in spoilage and food waste. You can find a detailed
explanation of product classification according to applicable standards using
the link: www.astecoolers.com/products.
Contact Us
Aste Finland Oy is a Finnish company specializing on premium cooler
solutions for our Customers’ brands. We provide wide range of research and
development (R&D) services integrated to highly evolved modular production.
All our Customers can always enjoy selected after-sales services for
maintenance, sourcing and fast spare part deliveries on European markets.
Customer Service
- On weekdays 08:00 – 16: 00 (CET)
- Email: [email protected]
- Phone: +358 2970 200 160
- Fax: +358 3424 0699
- Internet & Social Media
- www.astecoolers.com.
- www.facebook.com/astefinland www.instagram.com/astefinland/
Postal Address
- Aste Finland Oy Koskivuorenkatu 5 30420 Forssa FINLAND
- Register Information
- Business ID: 2321248-7
In case a malfunction or in order to order spare parts*, please contact the seller, or your local service partner or get in touch with us.
- After-sales service: +358 (0)29 7020 0150 or
- via e-mail: [email protected].
- The minimum period during which spare parts, necessary for the repair of the appliance is 8 years after placing the last unit of the model on the market
- Copyright © 2019 Aste Finland Oy www.astecoolers.com.
References
- Home - Aste Finland
- Products - Aste Finland
- Aste Finland Oy (@astefinland) • Instagram photos and videos