ciarra 20221015 Hood To Go Portable Mini Desktop Cooker Instruction Manual

May 15, 2024
CIARRA

ciarra 20221015 Hood To Go Portable Mini Desktop Cooker Instruction Manual

Dear customer:
Thank you so much for your purchase, please read this instruction manual carefully before installation & use.

READ ALL INFORMATION BEFORE USE

  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
  • When the appliance is not in use and before cleaning, unplug the appliance from the outlet firstly.
  • There shall be adequate ventilation of the room when the range hood is used at the same time as appliances burning gas or other fuels.
  • There is a fire risk if cleaning is not carried out in accordance with the instructions.
  • Do not flambé under the range hood.

CAUTION: Accessible parts may become hot when used with cooking appliances.

Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
Contact you local government for information regarding the collection systems available.
If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.

Important Notes

  • This product is suitable for use in an island kitchen, living room, parlor, RVs, balcony, patios, etc. It is used for high speed extraction of fumes from electric grill, electric fondue pot, multi-purpose pot, electric cake pan, electric grill, etc. After the fumes are separated by a polymer filter, the clean air is discharged into the room. This product is a small (Mini) type/ mobile/recirculating cooker hood, featuring air extracting and purifying functions.
  • After each use, make sure to clean the oil collecting cup,the aluminum filter and the polymer filter.
  • This product is intended for residential use only and the manufacturer assumes no responsibility if it is used for purposes other than domestic use.

Product Description

Product Description

Technologies:

  • Polymer Filter
  • Oil Collecting Cup
  • Aviation Aluminum Filter
  • DC Motor
  • Carbon Filter
  • High Efficiency Filtration System

Technical Specification

No. Category Specification
1 Voltage 100-240V
2 Input Interface DC5521
3 Power Rate 36W
4 Speed Level 2 Speeds
5 Noise Level <65dB
6 Maximum Airflow >2m³/Min
7 RPM 2600/3600RPM
8 Product Dimension L165mm*H343mm
9 Packing Size L390mmW255mmH205mm
10 Polymer Filter φ126*0.6mm
11 Aluminum Filter φ126*3mm
12 Product Net Weight 1.35kg
13 Gross Weight( box) 2.1kg

Accessories

No. Accessories Qty
1 Portable Hood 1
2 AC Adapter 1
3 Instruction Manual 1
4 Aluminum Filter 1
5 Carbon Filter 1
6 Polymer Filter 4

Power Connection and Storage

  • The power supply voltage must be consistent with the rated voltage.
  • Do not hang the cable wires in the air (to avoid tripping). Do not touch the cable with wet hands.
  • Do not use the product if the machine is operating abnormally or if there is significant damage.
  • All maintenance and replacement of the power cord should only be done by our after-sale service center.
    Power Connection and Storage

Installation Method

The power supply voltage must be consistent with the rated voltage.

  1. Inspection of accessories (The package includes the main unit 1, AC adapter 1, instruction sheet 1, aluminum filter 1 set, carbon filter1, polymer filter 4 pieces).
  2. Installation of filters: Remove the filter holder, install the polymer filter first then install the aluminum filter in the air inlet cover, put the filter holder back on, and re-install the air inlet cover, and you are all set.
  3. Turn on the power (connect power core to the machine, and the other end to the 220V household socket).
    Installation Method
  • After assembling the filter and other parts of the product according to the installation requirements, place the product on a stable table and plug in the power core (DC24V) into the power input connector on the bottom of the product. Then plug in the power socket into a household power socket.
  • When it’s ready, you can control it by pressing the on/off key on the back of the main unit; when you press the on/off key, the ring indicator lights up and the unit will be turned on.
  • Mode of operation: Press the power button for 2 seconds to start the machine and run at speed level 1 (blue light), press it once again to switch to level 2 (green light); press the power button 2 seconds again to turn it off.
  • Shutdown: When the indicator light is off, it means shutdown, and the product stops working at the same time.
    Instruction

Guideline for using this product with other small appliances

  • When this product is used with other small appliances, it should be placed on the same table, with the air inlet as close as possible to the cooking surface of other small appliances (like an induction hob) to improve the efficiency of smoke extraction.
  • This product should be placed as close as possible to the side of other small appliances (as shown on the right) to free your countertop or table and make it easier for you to enjoy your meal.
  • The fume exhaust outlet of this product is not allowed to blow directly on the human body.
  • During the operation of this product, it is forbidden to move, or push down the machine, etc.
  • Children and the elderly or sick people who have lost the ability to take care of themselves should use this product under adult supervision to prevent accidents.
  • When using this product, please make sure it is out of reach from children and teach them not to use it as a toy.
  • There should not be any objects blocking the air inlet/outlet.
    Guideline for using

Maintenance Process

Note: After each use of Ciarra Hood-to-go, please follow the procedure to replace the polymer filter and clean the oil collecting cup. Empty the oil collecting cup and rinse with detergent and water to avoid odor.

Filter Removing Process

  1. Pull out the air inlet cover.

  2. Remove the accessories in order.

  3. First remove the filter holder.

  4. Then remove the Carbon Filter and aviation aluminum filter.

  5. Then remove the polymer filter.

  6. Rinse the aluminum and polymer filters with warm water, allow them to air dry then install them back to the machine.
    Filter Removing Process
    Filter Removing Process

Filter Assembly Process

  1. Replace the polymer filter.
    Filter Assembly Process

  2. Assemble the Carbon Filter and aviation aluminum filter.
    Filter Assembly Process

  3. Assemble the filter holder.

  4. Attach the air inlet cover to the main unit.

  5. Complete the assembly.
    Filter Assembly Process

Cleaning and Maintenance

Product Overview

  1. The carbon filter should be changed every 2-4 months depending on the conditions of use.
  2. When cleaning, maintaining or moving the product, you must first turn off the product and then disconnect the power plug.
  3. Do not clean until the motor has completely stopped running to avoid injury.
  4. Do not immerse the power cord or main unit in water to clean or flush under the faucet, and do not expose the inside of the fan to water.
  5. Do not use wire brushes, oil or any corrosive fluids to clean this product to avoid damage.
  6. Use a slightly damp cloth to clean the surface.
  7. After cleaning, only connect the product to power once the main unit and relevant filter components are completely dry.
  8. If the product is not used for a long time, please store it in a dry, cool and safe place.

Important Safety Measures

  • When using the product for the first time, or when using it again after you shut it off, it is important to clean the oil in the oil collecting cup and the filters (polymer filter and aluminum filter)promptly.
  • Failure to follow these instructions and safety precautions may result in damage to the equipment and unnecessary loss to you.
  • Please keep this User’s Manual in a safe place.
  • Please read all the contents carefully before use.
  • When using this equipment, you must follow basic safety precautions.
  • Avoid dumping during use.

Safety Precautions

  • To avoid electric shock and fire, please use the original power cord we provided and plug the cord into the appropriate power outlet, do not modify the plug itself in any way. If the power cord is damaged, do NOT try to fix it yourself, please call a certified electrician to replace it.
  • Do not bend, bind, drag, or press the power cord with a heavy object, do not place the cord near a high temperature or fire source, do not clip the cord into a crevice, or change the cord yourself.
  • Do not unplug the power supply directly with wet hands. Disconnect the plug when the machine is not in use for a long time to prevent the insulation from deteriorating and causing electric shock.
  • Do not move the machine or disassemble or assemble parts during operation as this may cause personal injury or machine failure.
  • Always disconnect the power supply when cleaning and servicing or replacing the filters.
  • To ensure the safety of use and the performance of the machine, do not use other alternative products that are not approved by our company or certified by a third party.
  • Do not subject the product to severe impacts or drops.
  • Do not put small objects such as cotton swabs, wire, toothpicks, paper crumbs into the air inlet and outlet. Place the product on a stable surface to avoid damage to the machine or its parts.

If you have any question, please contact us at:
E-mail: [email protected]

ciarra Logo

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

CIARRA User Manuals

Related Manuals