VEMDIA KINGBOSS K5 Portable Energy Storage Power Station User Manual

VEMDIA KINGBOSS K5 Portable Energy Storage Power Station

Product Information

The product is a portable power pack that features a high-performance, high- safety, and high-power 32700 lithium iron phosphate cell. It has a compact and lightweight design, making it highly portable. The power pack comes with multiple output ports, including AC outlets, DC carports, USB output ports, and a solar charge port. It supports mains and photovoltaic charging modes and has under voltage, over-voltage, over current, over temperature, short circuit, overcharge, over-release, and other system protection functions. The product has a large LCD screen to display power and function indications and supports QC3.0 quick charge function and PD65W quick charge function. The power pack has a 1800W constant power output and larger capacity and higher wattages.

Product Usage Instructions

1. Turn on the DC function by pressing the DC ON/OFF switch.
2. Press the power button twice to turn on the product and light up the screen.
3. To charge your phone wirelessly, turn on the wireless charge switch.
4. The wireless cell phone charging pad supports 15W wireless cell phone pad charging.
5. Slides up to open the AC outlet cover and turn on the AC function.
6. The AC outlet can match Chinese, USA, Japanese, and European multiple standards with three pure sine wave AC outlets.
7. The TYPE-C output ports follow the instructions displayed on the screen.
8. The display screen shows power and function indications.
9. The DC car port can provide a maximum of 100W output.
10. The USB output ports can provide a 5V 2.4A / 1 port QC3.0 / 2 ports output when the USB ON/OFF switch is turned on.
11. The solar charge port supports 26V-40V input and has a protector for 15A overload protection.
12. Insert the AC power line into the AC quick wall outlet to charge the device in 2.5 hours.

Product Overview

1. Product profile
   The product defined in this specification is American standard 110V portable mobile power supply, which integrates portable energy storage power supply system with multiple functional modes. The product has built-in high- efficiency 32700 lithium iron phosphate cell, safe battery BMS management system and high-efficiency energy conversion circuit, which can be placed indoors or in cars. And can be used as home, office, outdoor emergency backup power supply. Charging can choose mains electricity or solar power to charge the product, without external adapter, the product is directly connected to the mains power supply, charging capacity can reach 98% in 1.6 hours, to achieve a real sense of fast charging. The product system can provide rated 110V 1200W AC output, and is equipped with 5V, 12V, 15V, 20V DC output and 15W wireless charging output to meet the requirements of different scenarios. Meanwhile, advanced power management system is configured to ensure long battery life and safety.。

2. Docs Release
   Notes This document is mainly used for product research and development, production, inspection, sales and product promotion. The customer acknowledges that this document is issued after review and approval. If there is any amendment, the latest version shall prevail.

3. Product Design Standard Ref

4. IEC62133 lithium battery product safety requirements.

5. UL1642 lithium battery pack safety requirements.

6. UL2743 portable power pack safety requirements.

7. EN55022 electromagnetic compatibility related.

8. IEC60950-1:2005+A1:2009+A2:2013 safety standards.

9. UN38.3 safety requirements for transport of lithium battery products international maritime dangerous goods code.

10. Ambient temperature: 25℃, humidity: 45 ~ 75% RH, air pressure 86 ~ 106 KPa.

Product Features

1. Compact, lightweight and Portability,Multiple Output Ports；
2. Support mains and photovoltaic charging modes;
3. Ac 110V, DC 5V, 9V, 12V, 15V, 20V and other voltage output;
4. High-performance, high safety and high power 32700 lithium iron phosphate cell;
5. Under voltage, over voltage, over current, over temperature, short circuit, over charge, overrelease and other system protection functions;
6. Use large LCD screen to display power and function indication;
7. Support QC3.0 quick charge function, support PD65W quick charge function;
8. 0.3s fast start, high efficiency;
9. 1800W constant power output;
10. Larger Capacity and Higher Wattages

Product Details Description

1. Product appearance pictures
2. Product Process Specification
3. Using engineering ABS+PC materials, rigid degree, shape the perfect curve.
4. The surface of the shell is clean and clean, without scratches, deformation, and no front.
5. Contact points of output and input interfaces have no corrosion, and the socket is suitable for tightness and smooth sliding cover.
6. The joints between shells should be in close contact, and the visible gap width at the joints should not be greater than 1mm;
7. The internal wiring layout is beautiful and neat.
8. Foot pad is non-slip, shockproof, prevent smooth.

Description of Port

6

|

AC Outlet

| 12V AC Outlet，it can match Chinese，USA,Japan and European multiple standards .three pure sine wave AC outlets
7| AC ON/OFF Switch| Turn on AC function，AC Output 1200W
8| TYPE-C Output Ports| 2 ports/ PD65W
9| Display Screen| Instructions follow the display screen
10| DC Car Port| 12V（Max 100W Output）
11| USB Output Ports| 5V 2.4A / 1 Port， QC3.0 /2 Ports
12| USB ON/OFF Switch| Turn on USB function
13| Solar Charge Port| XT60F（Port）Solar charging input（ support 26V-40V）
14| Fuse| Protector（15A overload protection）
15| AC Quick Wall Outlet| Insert AC power line ， Charge time：2.5hrs

LED Screen Description

No.|

LED Screen Displays

|

Function Profile

---|---|---
1|

Input Power

|

Display input wattage

2|

Cooling System Display

|

Display cooling system operation

3|

Output Power

|

Display output wattage

4/5

|

Hertz Display

| 50Hz（Click“POWER”Switch +AC Switch 3 seconds to Swtic h Frequency automatic）
6|

Wireless Charge Display

|

Display the status of wireless charging

7|

Battery Percentage

|

100% battery input

8|

Alarm Display

|

Disply the malfunction and lightflash warning

9|

Power Input Display

|

Flashing while power charging

10|

DC ON/OFF Display

|

Display the status of DC switch operation

11|

USB ON/OFF Display

|

Display the status of USB port operation

12|

AC ON/OFF Display

|

Display the status of AC switch operation

Function Operating Description

1. Product charging

   • Plug the power cord into the AC charging input port of the host power supply, or connect the solar panel to the XT60 port, and the display panel will blink incrementally from left to right. When all the 10 pan els are on and the battery percentage is 100%, it means that the product is fully charged.
   • When charging, pay attention to the power supply voltage must be the same as the required input voltage, otherwise, it will cause overvoltage protection or mains trip.

2. Ac discharge

   • Click the “POWER” button for 1S, and the screen lights up. Click the AC button, and the screen display ys AC. At this time, insert the load line arbitrarily into the AC/110V output port (6), and the device can b e used normally.
   • Note: Please do not exceed the maximum output power of the machine 1200W. If the load exceeds 1 200W, the power supply will enter the protection state and cannot output, and the buzzer alarm will be I ssued, and the alarm symbol will appear on the display screen. At this time, the load device needs to be
   • removed, press any set of switches to remove the alarm, and the load power will be reduced to the rate d power for normal use.

3. Dc discharge

   • Press the “POWER” button for 1S, and the screen lights up. Press the “USB” button to display USB on the screen. Click the “DC” button to display DC on the screen. If a DC or USB function is not used, press the button for 1 second to disable it.
   • QC3.0 port: it can charge devices that support fast charging.
   • Type-c port: it can support the CHARGING of PD65W fast charging device.

4. Hertz conversion
   When the AC is off, hold down the “POWER” button and the AC button for 3 seconds to automatically sw itch to 50Hz or 60Hz. The normal factory setting is 60Hz for the Japanese/American and 50Hz for the Ch inese/European.

5. Product standby and shutdown

   • When all output DC/AC/USB/ wireless charging is off, the display enters hibernation mode for 50 seco nds, and automatically shuts down within 1 minute, or long press “POWER” to shut down.
   • If the output AC/DC/USB/ wireless charger are all turned on or one of them is turned on, the display
     will enter hibernation mode within 50 seconds, and the display will enter the steady state and will not automatically shut down. Click the “POWER” button or the indicator button to turn on, and long press the “POWER” button for 3 seconds to turn off.

Product Electrical Performance Index& Specification

Battery Pack

Battery BMS Safety Management

Power Charging Supply

AC Release

USB Release

TYPE-C Release

DC Release Performance

Wireless Release

Display Screen

Product Safety

4

|

Operating Environment Temperature

| Charge：0℃~40℃|
Discharge：-10℃~40℃|
 |

Storage   Environment Temperature

| -20~20℃ （12 months）| Keeps battery power
 |  | between 45%~55%
-20~40℃ （3 months）
5|  | before storage，Please

 | -20~60℃ （1 month）| charging power in time
 |  | after power off.
6| Operating Environment Humidity| 65±20%RH|
7| Operating Environment Humidity| 65±20%RH|

Reliability Testing & Standard

Testing Instrument

No.| I n s tr u me n t Name| E q u ip m en t Standard| Note
---|---|---|---
1| Electronic load meter| Accuracy：Voltage 0.01V/ Current 0.01A|
2| DC| Accuracy：Voltage 0.01V/ Current 0.01A|
3| Humidity& Constant| Accuracy： Temperature  deviation：＋/-5℃|

Testing Project

No.| T e sting item| T e s t i ng Request & Standard| Note
---|---|---|---

1

| Room temperature charge-discharge performance testing| According to the requirements of charging voltage and charging current in the specification, each function should meet the requirements of the specification after two

cycles of charging and discharging

|

3

| Overdischarge safety performance testing| Use 110V port to discharge, the power is 1200W, from 100% electric discharge to automatic shutdown of the

product, and then charge the product to 100% electricity, the function should be consistent with the specification.

|
4| Overcharge safety performance test| After charging the product to 100% with an AC power cord or solar energy board, continue charging for 12 hours, product  functions  should  be  consistent  with  the|
 |  | specification.|
---|---|---|---

5

|

Low-temperature charge-discharge performance test

| Under   0℃, according to the specification of charging voltage and charging current requirements, charge and

discharge two cycles, the function should meet the specification requirements.

|

6

|

High-temperature charge-discharge performance test

| In an environment of 40℃, according to the specification

of charging voltage and charging current requirements,

charge and discharge two cycles, the function should meet the specification requirements.

|

7

| High and low-temperature storage performance testing| After 7 cycles of low temperature -5 ℃ and high

temperature 35 ℃, the function of the product should meet the requirements of the specification

|

Product Transportation Info

Product Packing List

Use Environment & Note

No.| I t e m| T e c hn i ca l

Index

| Unit| Note
---|---|---|---|---

1

| ****

Operating Temperature

| ****

0-40

| ****

℃

| 1.   Do not work in an environment higher than 40 ° C

2. It    is    recommended    not    to    work    in    an

environment lower than 0℃

---|---|---|---|---
2| Storage Temperature| -5-35| ℃| Do not be used for a long time above 35 ℃

ambient temperature

3| relative humidity| 20%－90%|  |
4| Heat dissipation| Air cooling|  | If the temperature of the product is too high, it will work normally after cooling down

1. Please pay attention to the input and output voltage range when using this product. The input voltage and power range required by your device is not within the range of the energy storage power supply.
2. The connection cables must be matched because different load cables correspond to different equipment. Therefore, in order to normally use the energy storage power supply for your equipment, please use the original connection cable 3 with a guarantee.
3. The energy storage power supply needs to be stored in a dry environment. Proper storage methods can prolong the service life of the energy storage power supply.
4. If you do not use the product for a long time, please charge and discharge the product once a month to improve the service life of the product.
5. Do not place the product in a place where the temperature is too high or too low
6. High or too low ambient temperature will shorten the service life of electronic products and seriously damage the product shell
7. Do not use corrosive chemical solvent to wipe the product surface stains can be swabbed with a small amount of anhydrous alcohol to scrub
8. Please handle the product gently when using it, do not fall down or disassemble it violently
9. There is high pressure in the product, do not disassemble it by yourself, lest it may cause a safety accident
10. It is recommended that the device be fully charged for the first time to avoid inconvenience caused by low power. After the device is fully charged, the fan will continue to work for 2-5 minutes after the charging power cable is removed for standby heat dissipation (the specific time may vary with the scene temperature)
11. When the fan is working, prevent dust particles or foreign matters from being inhaled into the device. Otherwise, the device may be damaged.
12. After the discharge is terminated, the fan continues to work to lower the temperature of the device to a proper temperature for about 30 minutes (the time may vary with the scene temperature). When the current exceeds 15A or the temperature of the device is too high, the automatic power-off protection is triggered.
13. During the charging and discharging process, connect the device to the charging and discharging device properly before starting the charging and discharging device; otherwise, sparks may occur, which is a normal phenomenon

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. During the operation of the device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>