STMicroelectronics STSW-WLC38FWBPP Wireless Charger Receiver Evaluation Kit Instructions

: October 30, 2023
: STMicroelectronics

Table of Contents

STMicroelectronics STSW-WLC38FWBPP Wireless Charger Receiver Evaluation
Product Information
Product Usage Instructions
Features
Description
IMPORTANT NOTICE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

STMicroelectronics STSW-WLC38FWBPP Wireless Charger Receiver Evaluation

Kit

Product Information

The STSW-WLC38FWBPP is a firmware designed for the STDES-WLC38WA and STDES- WLC38TWS wireless charger receiver evaluation kit. It includes application middleware, hardware, host interface, and Qi protocol library. The STWLC38JRM STDES-WLC38WA STDES-WLC38TWS is a Qi-compliant inductive wireless power receiver for up to 15W applications. It is a Qi-compatible wireless power receiver reference design for Qi 2.5W applications. Additionally, it comes with a GUI for developing applications using the STDES-WLC38WA evaluation board.

Product Usage Instructions

To use the STSW-WLC38FWBPP firmware, you will need the STDES-WLC38WA and STDES-WLC38TWS wireless charger receiver evaluation kit. Follow the steps below to use the product:

Ensure that the Qi-compatible wireless power receiver is connected to the evaluation board.
Connect the evaluation board to your computer using a USB cable.
Download and install the STSWWPSTUDIO GUI from the STMicroelectronics website.
Open the STSWWPSTUDIO GUI and select the STDES-WLC38WA evaluation board.
You can now develop applications using the GUI and test them using the wireless charger receiver evaluation kit.

For further information or assistance, please contact your local STMicroelectronics sales office.

Features

Up to 2.5 W output power
High efficiency (98% typical) synchronous rectifier operating up to 800 kHz
Multilevel ASK modulator enhanced FSK demodulator
Adaptive rectifier configuration (ARC) mode for enhanced spatial freedom
32 bit, 64 MHz Arm® Cortex® -M0+ core with 32kB RRAM, 16 KB SRAM
On-chip thermal management and protections

Description

The STSW-WLC38FWBPP firmware for STDES-WLC38WA and STDESWLC38TWS board, offers the STWLC38 device functions based on the Qi standard.
The firmware can be downloaded via I²C using the STSW-WPSTUDIO offering complete board monitoring.
You can access and modify different configuration parameters, tailoring the operation of the device to the needs of custom applications.

Product Summary

Firmware for STDES- WLC38WA and STDES-WLC38TWS

wireless charger receiver evaluation kit

|

STSW- WLC38FWBPP

Qi-compatible wireless power receiver reference design for Qi 2.5W applications| STDES- WLC38WA/ STDES- WLC38TWS
Qi-compliant inductive wireless power receiver for up to 15W applications|

STWLC38JRM

GUI for developing applications using the STDES-WLC38WA

evaluation board

|

STSW- WPSTUDIO

Applications| Wireless Chargers

Revision history

Table 1: Document revision history

Date	Revision	Changes
10-May-2023	1	Initial release.

IMPORTANT NOTICE

READ CAREFULLY

STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgment. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of purchasers’ products.

No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document.

For further information contact your local STMicroelectronics sales office.

www.st.com