VEVOR JY-BC Utility Service Cart

Product Information

The JY-BC model utility cart is a sturdy and durable cart designed to safely transport items in various settings. The cart comes with an upper platform, lower platform, legs, castors, and a handle. The weight capacity and other product capabilities apply to a properly and completely assembled product only. The cart should only be used on a flat, level, hard, and smooth surface capable of safely supporting a fully loaded service cart.

Safety Instructions and Precautions

It is important to carefully read all safety instructions and precautions before using the product to prevent serious injury. Assembly should be done according to the provided instructions, and the assembly area should be clean, well-lit, and free of bystanders. Wear ANSI-approved safety goggles and heavy- duty work gloves during assembly. Do not assemble when tired or under the influence of alcohol, drugs, or medication. To prevent tipping, push/pull using the supplied handle only. Use the cart as intended only and inspect it before every use. Do not use it if parts are loose or damaged.

Tool Required for Installation A Phillips screwdriver and rubber mallet are required for installation. Note that these tools are not included in the product.

Parts List The parts list includes an upper platform (#2), handle (#1), legs (two left and two right, #4 and #5), lower platform (#3), castors (#6 and

7), screws and hex nuts (#8, #9, #10).

Assembly Instructions

1. Turn the upper platform upright (#2) and install the handle (#1).
2. Turn the upper platform assembly upside down and install the legs (two left and two right, #4 and #5).
3. Install the lower platform (#3) and castors (#6 and #7).
4. Tighten all screws and hex nuts (#8, #9, #10).
5. Use the mallet to tap down the parts to ensure they are seated properly before fastening them with screws.

• We continue to be committed to provide you tools with competitive price.
• Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
• This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

SAFETY INSTRUCTION AND PRECAUTIONS

WARNING:
Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL

Assembly precautions

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol, drugs or medication.
6. Weight capacity and other product capabilities apply to properly and completely assembled product only.
7. Assemble on a flat, level, hard and smooth surface capable of safely supporting a fully loaded service cart.

Use precautions

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. DO NOT SIT, STAND OR cLIMB ON THIS ITEM.
2. This product is not a toy nor a toy chest. Do not allow children to play with or near this item.
3. Do not exceed weight capacities, evenly distributed from bottom up. Be aware of dynamic loading! Sudden load movement may briefly create excess load causing product failure. Do not exceed capacity of bench or shelf supporting Top Chest.
4. Use only on a flat, level, hard and smooth surface capable of safely supporting a fully loaded Chest.
5. Do not lift while loaded.
6. To prevent tipping, push/pull using supplied handle only.
7. Use as intended only.
8. Inspect before every use; do not use if parts are loose or damaged.

TOOL REQUIRED FOR INSTALLATION

Phillips Screwdriver and Rubber mallet
Note: The phillips screwdriver and rubber maller tools not included with this product

PARTS LIST

ASSEMBLY

Use the mallet to tap down the parts to ensure they are seated properly before fastening them with screws.

1. Turn upper platform upright (#2) and install handle (#1)
2. Turn upper platform assembly upside down, and install legs (two left and two right, #4and#5）
3. install lower platform(#3) and castors(#6 #7）Tighten all screws and hex nuts. (#8, #9, #10)

| Items| Description
---|---|---
1| Name| Utility carts
2| Model| JY-BC
3| Parameter| Load-bearing：550Ib，Number of plies：2，Pallet

sizes(LxWxHxID)：950x650x100x65mm

4| Package

Size

| 970x660x230mm
5| G.W.| 23.5KG

• Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai

• Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

• Imported to the USA: VEVOR STORE INC, 9448 RINCHMOND PL #E RANCHO CUCAMONGA, California, 91730 United States of America

• Pooledas Group Ltd Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom

• SHUNSHUN GmbH Römeräcker 9 Z2021, 76351 Linkenheim-Hochstetten, Germany

• Made In China

• Technical Support and E-Warranty Certificatewww.vevor.com/support

• NEED HELP? CONTACT US!

• Have product questions? Need technical support? Please feel free to contact us:[email protected]

References

• vevor.com/support
• Contact Us – Official VEVOR Support

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>