PRIME3 SSF41 Stand Fan Owner’s Manual
- October 30, 2023
- PRIME3
Table of Contents
PRIME3 SSF41 Stand Fan
Product Information
The SSF41 is a domestic-use fan designed for maximum efficiency and performance. The fan has a maximum fan flow rate of 64.22 m3/min and a fan power input of 54 W. The service value is 1.19 (m3/min)/W, while the standby power consumption is 0 W. The fan sound power level is 59.3 dB(A) and the maximum air velocity is 2.59 meters/sec. The service value measurement standard is IEC 60879:1986. The device is compliant with EU directives, including the Low Voltage Directive (LVD) and Electromagnetic Compatibility (EMC), and is marked with the CE mark on the rating label. The manufacturer of the device is 2N-Everpol Sp. z o.o., located in ul. Pulawska 403A, 02-801 Warsaw, Poland. For more information, contact them via phone at +48 22 688 08 00 or email at info@prime3.eu. You can also visit their website at www.prime3.eu.
Product Usage Instructions
- Before using the device, read the instruction manual and follow the instructions carefully.
- The device is for domestic use only and should not be used for any other purposes.
- The device should only be connected to a socket with values corresponding to the values on the rating label.
- Check if the total current consumption of all devices plugged into the wall outlet does not exceed the fuse in the circuit.
- If using an extension cord, make sure that the total power consumption of the equipment plugged into the extension cord does not exceed the extension cord power rating. Extension cords should be arranged to avoid tripping hazards.
- Do not let the cord hang over the edge of the counter or touch any hot surface.
- The device is not designed to be controlled via an external timer, separate remote control, or other equipment that can turn the device on automatically.
- Before maintenance work, always disconnect the unit from the power supply.
- When unplugging the power cord from the electrical outlet, hold it by the plug only and remove the plug carefully. Never pull the cable as it may cause damage to the plug or power cord. Damage to the power cord or plug can lead to an electrocution hazard.
- Never leave the product connected to the power source without supervision.
- Do not put the power cable, plug, or the whole device into water or any other liquids. The device should be cleaned regularly complying with the manufacturer’s instructions.
- Do not try to repair the defective product by yourself.
- Do not insert any objects between the machine’s protective grilles.
- Do not use the fan in rooms with high humidity, such as bathrooms, etc. Do not place the fan in places where it could fall into a bathtub, washbasin, or other water tank.
- Never use the fan without the fan grilles installed.
- Do not turn on the fan if it is not assembled properly, particularly when fan grilles are not installed.
- Do not place the fan near curtains or other objects that can get accidentally caught by the fan.
OVERVIEW
Efficiency information
SSF41
Description| Symbol| Value| Unit
Maximum fan flow rate| F| 64,22| m3/min
Fan power input| P| 54| W
Service value| SV| 1,19| (m3/min)/W
Standby power consumption| PSB| 0| W
Fan sound power level| LWA| 59,3| dB(A)
Maximum air velocity| C| 2,59| meters/sec
Measurement standard for service value| IEC 60879: 1986
Contact details for obtaining more information| 2N-Everpol Sp. z o.o.
ul. Puławska 403A
02-801 Warsaw, Poland phone: +48 22 688 08 00
Important notes
- Before using this device read the instruction manual and follow the instructions inside. The manufacturer is not liable for any damages caused by the misuse of this device due to inappropri-ate handling. Please keep this manual for future reference.
- This device is for domestic use only. Do not use for any other purposes.
- The device should only be connected to an socket with values corresponding to the values on the rating label.
- It is necessary to check, if total current consumption of all devi-ces plugged into the wall outlet does not exceed the fuse in the circuit.
- If you are using an extension cord, make sure that the total power consumption of the equipment plugged into the exten-sion cord does not exceed the extension cord power rating. Extension cords should be arranged in such a way as to avoid tripping hazards.
- Do not let cord hang over edge of counter, or touch any hot surface.
- The device is not designed to be controlled via an external timer, separate remote control, or other equipment that can turn the device on automatically.
- Before maintenance work always disconnect the unit from the power supply.
- When unplugging the power cord from electrical outlet, hold it by the plug only and remove the plug carefully. Never pull the cable as it may cause damage to the plug or power cord. Damage to the power cord or plug can lead to an electrocution hazard.
- Never leave the product connected to the power source
- without supervision.
- Never put the power cable, the plug or the whole device into the water or any other liquids.
- The device should be cleaned regularly complying with the recommendations described in the section on cleaning and maintenance.
- Do not place the device near sources of heat, ?ame, an electric heating element or a hot oven. Do not place on any other device.
- This equipment can be used by children aged 8 years and over as long as supervision is provided. People with reduced physical or mental capabilities, as well as people with no previ-ous experience of using this equipment must be supervised and made aware of the risks. The instruction manual should be used as a reference for the safe use of
- this equipment. Children should not play with the equipment.
- Children without ensured supervision should not be allowed to perform the cleaning and maintenance of equipment.
- Additional precautions should be taken when using this device in the presence of children or pets. Do not allow children to play with the device.
- Never use the product close to combustibles.
- Never expose the product to atmospheric conditions such as direct sun light or rain, etc… Never use the product in humid conditions (like bathroom or camping house).
- The power cable should be periodically checked for damage. If the power cable is damaged the product should be taken to a professional service location to be ?xed or replaced to prevent any hazards from arising.
- Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not ź work properly. Do not try to repair the defected product by yourself as it can lead to electric shock. Always return the dam-aged device to a professional service in order to repair it.
- All the repairs should only be performed by authorized service professionals. Any attempted unauthorized repairs performed can be a hazard to the user.
- Only Original accessories should be used, as well as accessories recommended by the manufacturer. Using accessories which are not recommended by the manufacturer may result in damage of the device and may render the device unsafe for use.
- Do not block the air?ow or cover the device.
- Regularly clean the fan of dust so that dirt does not block the air Now.
- Do not insert any objects between the machine’s protective grilles.
- Do not use the fan in rooms with high humidity, such as bathrooms, etc. Do not place the fan in places where it could fall into a bathtub, wash basin or other water tank.
- Never use the fan without the fan grilles installed.
- Do not turn on the fan if it is not assembled properly, particularly when fan grilles are not installed.
- Do not place the fan near curtains or other objects that can get accidentally caught by the fan.
The device is compliant with EU directives:
- Low voltage directive (LVD)
- Electromagnetic compatibility (EMC) Device marked CE mark on rating label
When this crossed-out wheeled bin symbol is attached to a product it means
that the product is covered by the European Directive 2012/19/EU. Please
inform yourself about the local separate collection system for electrical and
electronic products. Used appliance should be delivered to the dedicated
collecting points due to hazardous components, which may affect the
environment. Do not dispose this appliance In the common waste bin.
Environmental information
All unnecessary packaging has been omitted. We have tried to make the
packaging easy to separate into three materials: cardboard (box),polystyrene
foam(buffer) and poly ethylene (bags, protective foam sheet). Your system
consists of material which can be recycled and reused if disassembled by a
specialized company. Please observe the local regulations regarding the
disposal of packaging materials, exhausted batteries and old equipment. Your
products is designed a manufactured with high quality materials and
components, which can be recycled and reused.
Technical data
Power: 55 W
Power supply: 220-240 V ~50 Hz
- Front guard
- Blade nut
- Fan blade
- Back guard fixing nut
- Back guard
- Motor shaft stem
- Motor housing
- Oscillation lock
- Guard fixing screw
- Control panel with push buttons
- Telescopic fan stand
- Fan stand’s height locking screw
- Fan base screw cap
- Fan foot mounting screws
- Fan feet
APPLIANCE ASSEMBLY AND DISASSEMBLY
- Make sure the appliance is disconnected from the power source.
- Assembly:
- a) Arrange the fan feet (15) on a flat surface so that they form a cross base
- b) Place the fan stand (11) on the cross base (15) and fasten it with screws (14)
- c) Install the cap (13) of the fan base screws on the stand, so that it covers the screws
- d) Adjust the height of the stand (11) and screw in the locking screw (12)
- e) Mount the motor housing (7) on the fan stand (11)
- f ) Install the back guard (5) on the motor body (pay attention to the notches).
- g) Install the back guard mounting nut (4).
- h) Install the fan blade (3) paying attention to the notches in the stem (6) and in the blade centre opening.
- i) Tighten the blade fixing nut (2)
- j) Install the front guard (1) by fitting its edge into the catches on the back guard. Then, secure it by tightening the guard fixing screw (9).
Disassembly: a) Perform the disassembly in the reverse order of the assembly procedure.
FAN OPERATION
- Before connecting the fan to the power supply, make sure that the button on the control panel is set to 0. Connect the appliance to the power supply.
- To start the fan, press one of the buttons on the control panel:
- low speed
- medium speed
- high speed
- To turn off the fan, press the 0 button on the control panel.
- Oscillation. To enable the fan’s oscillation movement, press the oscillation lock. To disable the fan’s oscillation movement, lift the oscillation lock.
- Vertical tilt adjustment. To change the fan tilt, hold the appliance in position and tilt the motor body.
CLEANING AND MAINTENANCE
Before cleaning and maintenance, make sure that the fan has been disconnected from the power source. The fan should be cleaned regularly. Body, posture should be wiped with a dry cloth. The interior should be blown out with compressed air or vacuumed with a vacuum cleaner.
- 2N-Everpol Sp. z o.o. ul. Pulawska 403A
- 02-801 Warsaw, Poland
- phone: +48 22 688 08 00
- e-mail: info@prime3.pl
- www.prime3.pl.
- W przypadku pytari lub problem6w
- prosimy o kontakt z naszym serwisem. In case of questions or problems please contact our service.
- Tel. +48 22 688 08 33
- E-mail: info@prime3.pl
- All rights reserved. All brand names are registered trademarks of their respective owners. Specifications are subject to change without prior notice.