PRIME3 SSM41 Smoothie Maker MIX and GO Owner’s Manual
- June 11, 2024
- PRIME3
Table of Contents
SSM41 Smoothie Maker MIX and GO
Owner’s Manual
SSM41 Smoothie Maker MIX and GO
Important notes
Before using this device read the instruction manual and follow the instructions inside. The manufacturer is not liable for any damages caused by the misuse of this device due to inappropriate handling. Please keep this manual for future reference.
-
This device is for domestic use only. Do not use for any other purposes.
-
The device should only be connected to an socket with values corresponding to the values on the rating label.
-
It is necessary to check, if total current consumption of all devices plugged into the wall outlet does not exceed the fuse in the circuit.
-
If you are using an extension cord, make sure that the total power consumption of the equipment plugged into the extension cord does not exceed the extension cord power rating. Extension cords should be arranged in such a way as to avoid tripping hazards.
Do not let cord hang over edge of counter, or touch any hot surface. -
The device is not designed to be controlled via an external timer, separate remote control, or other equipment that can turn the device on automatically.
-
Before maintenance work always disconnect the unit from the power supply.
-
When unplugging the power cord from electrical outlet, hold it by the plug only and remove the plug carefully. Never pull the cable as it may cause damage to the plug or power cord. Damage to the power cord or plug can lead to an electrocution hazard.
-
Never leave the product connected to the power source without supervision.
-
Never put the power cable, the plug or the whole device into the water or any other liquids.
-
The device should be cleaned regularly complying with the recommendations described in the section on cleaning and maintenance.
-
Do not place the device near sources of heat, flame, an electric heating element or a hot oven. Do not place on any other device.
-
The appliance must not be used by children. Keep the appliance and its cord out of the reach of children.
-
The appliance may be used by individuals with limited physical, sensory or mental capability as well as those without knowledge of or previous experience in the use of similar appliances, provided such individuals are supervised or instructed with regard to the safe operation of the appliance and are informed about the potential hazards.
-
Additional precautions should be taken when using this device in the presence of children or pets. Do not allow children to play with the device.
-
Never use the product close to combustibles.
-
Never expose the product to atmospheric conditions such as direct sun light or rain, etc… Never use the product in humid conditions (like bathroom or camping house).
-
The power cable should be periodically checked for damage. If the power cable is damaged the product should be taken to a professional service location to be fixed or replaced to prevent any hazards from arising.
-
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly.
Do not try to repair the defected product by yourself as it can lead to electric shock. Always return the damaged device to a professional service in order to repair it. All the repairs should only be performed by authorized service professionals. Any attempted unauthorised repairs performed can be a hazard to the user. -
Only Original accessories should be used, as well as accessories recommended by the manufacturer. Using accessories which are not recommended by the manufacturer may result in damage of the device and may render the device unsafe for use.
-
Use extreme caution with the blades, which are very sharp.
-
Do not put your fingers or utensils into blender cup, when the device is plugged in.
-
Do not run the blender when the lid has not been placed on the cup.
-
Do not use the blender for crushing hard ingredients like coffee beans and cocoa.
-
Do not pour hot liquids (above 60 degrees C) into the blender bowl.
Device is compliant with EU directives:
- Low voltage directive (LVD)
- Electromagnetic compatibility (EMC) Device marked CE mark on rating label
When this crossed-out wheeled bin symbol is attached to a product it means
that the product is covered by the European Directive 2012/19/EU. Please
inform yourself about the local separate collection system for electrical and
electronic products. Used appliance should be delivered to the dedicated
collecting points due to hazardous components, which may affect the
environment. Do not dispose this appliance In the common waste bin.
Environmental information
All unnecessary packaging has been omitted. We have tried to make the
packaging easy to separate into three materials: cardboard (box),polystyrene
foam(buffer) and poly ethylene (bags, protective foam sheet).
Your system consists of material which can be recycled and reused if
disassembled by a specialized company. Please observe the local regulations
regarding the disposal of packaging materials, exhausted batteries and old
equipment.
Your products is designed a manufactured with high quality materials and
components, which can be recycled and reused.
TECHNICAL PARAMETERS
Rated power: 300W
Maximum peak power: 1000W
Power supply: 220-240V ~50/60Hz
Maximum continuous operation time KB = 1 min
Minimum interval time = 10 min
Dimensions: 13,7×12,7×36,1 cm
Weight: 1,1 kg
- Body with the motor
- Rotor
- Cocktail bottle
- Blades for the blender
- Lid with a mouthpiece
- ON buton- low speed.
- ON buton- high speed.
BEFORE FIRST USE
- Remove all papers, cartons, foil which secure the blender and blender’s parts
- Clean the blender following the advice in Cleaning and Maintenance chapter.
FOOD PREPARATION
Remove stones (plums, peaches, cherries etc).
Remove tough skins (melons, pineapples, cucumbers, potatoes etc).
Soft-skinned and other foods just need washing Cut the food into small pieces
(2-3 cm).
USING THE BLENDER
Put the ingredients into the cup. Pour some water. It is recommended not to
fill more than ¾ of cup’s capacity.
Assembly blades on a bottle Put a bottle with blades mounted on the base of
the device fitting into the rotor, then turn to lock.
Note: the blender jug need to be hold during operation.
Plug the blender to the mains.
Turn on the blender pressing the button .
When the ingredients will become the right consistency, turn off the device.
Do not operate the blender for more than 3 minutes. Wait 30 minutes before the
next run.
After preparing the cocktail unscrew the set of blades of the bottle . Screw
the lid with a spout. After operation, pull out the plug from the electric
socket.
CLEANING AND MAINTENANCE
Make sure the blender has been disconnected from the power source.
Clean the body with a slightly damp cloth and then wipe it dry. Do not
submerge the body in water or other liquids.
The cocktail bottles and the mouthpieces are dishwasher safe.
All elements, except for the body with the motor, are suitable for cleaning
with water and a dishwashing liquid.
2N-Everpol Sp. z o.o.
ul. Pulawska 403A 02-801
Warsaw, Poland
phone: +48 22 331 99 59
e-mail: info@prime3.pl
www.prime3.pl
In case of questions or problems please contact our service.
Tel. 00 48 22 331 99 54
E-mail: info@prime3.pl
All rights reserved. All brand names are registered trademarks of their
respective owners. Specifications are subject to change without prior notice
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>