Hyslor Sonic Clean 2000 Sonic Electric Toothbrush User Guide

Sonic Clean 2000
User Guide

Sonic Clean 2000 Sonic Electric Toothbrush

Your Toothbrush

5-in-1 Work Indicator Light

Your toothbrush is equipped with a smart pressure sensor with various functionaities indicated by colored ights.

| Normal Working Mode
Steady blue light
The indicator light is blue when you turn on the toothbrush.
---|---
| Pressure Reminder
Flashing orange light
If too much pressure is applied, the indicator flashes orange, reminding you to reduce pressure.
| 180x Usage Memory Function
Flashing blue light
When the toothbrush is turned on for more than 45 seconds, it will record that as one use of the brush head. After registering 180 uses. the indicator will flash blue when the toothbrush is turned on, reminding you to replace the brush head.
| Low Battery Reminder
Flashing red light
When the battery is low, the indicator light will flash red to remind you to charge the toothbrush.
| Charging Display
Breathing green light
The light will flash green in a breathing pattern when charging. Once fully charged, the light will stay green without breathing. A full charge typically takes 10 hours.

Specification

How To Use

1. CORRECT INSTALLATION
   Align the front of the brush head with the front of the toothbiush handle.
   Tip: The toothbrush is deliverad pre-charged and ready for use.

2. RINSE BRUSH AND APPLY TOOTHPASTE
   Rinse the bristies with running water, and apply an appropriate amount of toothpaste.

3. SELECT MODE
   Press the power button to turm the toothbrush on. You can switch botwasn modos by briefly pressing it when the made indicator displays a breathing lignt pattern.

4. BRUSHING METHODS Move the toothbrush slowly at a 45-degres angle to your gum line and brush ovenly throughout your mouth for 2 minutes. Your Sonlc Cloan 2000 toothbrush will pause overy 30 seconds, signifyig s time to brush another aroa of your mouth. The  toothbrush automatically stops at the end of the timer. Tip: There Is no nezd to manually brush up and down during this pracess. Just move in a slow, circular motion, and do not apply excess pressure.

5. CLEANING
   Rinsa your mouth with water and do the same with the toothbrush o remave bacteria and the remaining tootnpaste.

Your 2-Minute Brushing Guide

Modes

| CLEAN
31000 reps/min
Clean and teeth protection
---|---
| WHITE
35000 reps/min
Toothwasn level white
| CLEAN
33000 reps/min
Clean teeth deeply
| GUMCARE
33000 reps/min
Gentle massage of gums
| SENSITIVE
31000 reps/min
Gentle care

How to Charge Your Toothbrush

TYPE-C DIRECT-CONNECTION CHARGING
The indicator light flashing red means that your toothbrush needs to be recharged. Follow the steps below to charge it:
Open the bottom cover of the electric toothbrush. Then connect the Type-C interface of your USB cable to the port at the bottom of the toothbrush. Finally, connect the other end of the USB cable to the power adapter.
While charging, the indicator light displays a “breathing” light pattern. When the toothbrush is fully charged, the indicator light remains lit.
Tip: An additional rubber shell inside the bottom cover must also be uncovered to display the Type-C interface. When you finish charging, please ensure that both the rubber shell and bottom cover are tightly closed to protect the motor from water.
Attention: Please use UL standard 5V IPX-4 wall adapter (Type A) only
To avoid dangerous incidents, do not place near metal objects or water when charging.
Attention: Please use Hyslor power adapter coming with the package or any other USB port charging device.

Frequently Asked Questions

Q: How does the pressure sensor behave?

A: Hyslor adopts a new visible pressure sensor - the LED warning light will start flashing orange when you apply too much pressure, protecting your enamel and gum health.

Q: Where can I buy a toothbrush head? How often do I need to change the toothbrush head?

Q: How long will it take to fully charge the battery? Can I use it before it’s fully charged?

A: It can take up to 10 hours to fully charge the battery to last 330 days in sensitive modes and 200 days in cleaning modes. Yes, you can use the toothbrush before it is fully charged.

Q: Can Luse my electric toothbrush In the shower?

A: Of course. Your Hyslor toothbrush is IPX7 waterproof. Just remember to close the bottom cover tightly.

Q: What if the vibration of the toothbrush seems to be getting weaker and weaker?

A: The connection between the toothbrush head and the host is too tight. Please remove the toothbrush head and install it again.

Customer Service

Limited Warranty and Extend Warranty Program
Hyslor warrants this product to be free of defects in faulty materials and workmanship under normal use for two year from the date of purchase. We present the Extend Warranty Program for VIP members, which ensures that you keap onjoying the Broduct for  an additional year. Please email ONE YEAR EXTENTION and your ONLINE ORDER NUMBER as subject to Support@hysior.com. You willbo our VIP momber and got access t0 threo-year warranty. This warranty d2s not cover damages caused by misuse, sbuse, neglect, dropping, tampering, ahteration or unauthorized repair; normal wear and tear, including chips, scratches, abrasions, discoloration or fading; brush heads and products without sufficient proof of purchase.
Subscribe
As a VIP member, you will be automatically subscribed to receive exclusive promotion of our new beauty and personal care products. If you want to unsubscribe, reply UNSUBSCRIBE to suppert@hyslor.com.
If you have any questions about your product or personal oral care, please don’t hesitate to tell us. Your satisfaction is most important! For faster service, locate the product name and your online order number in your email.
Email: supporti@hyslor.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>