Hyslor HY005 Sonic Electric Toothbrush with Press Sensor for Adults User Guide
- June 11, 2024
- Hyslor
Table of Contents
Hyslor HY005 Sonic Electric Toothbrush with Press Sensor for Adults
Your Toothbrush
5-in-l Work Indicator Light
Your toothbrush is equipped with a smart pressure sensor with various functionalities indicated by colored lights.
Normal Working Mode
- Steady blue light
The indicator light is blue when you turn on the toothbrush.
Pressure Reminder
- Flashing orange light
If too much pressure is applied, the indicator flashes orange, reminding you to reduce pressure.
180x Usage Memory Function
- Flashing blue light
When the toothbrush ls turned on for more than 45 seconds, it will record that as one use of the brush head. After registering 180 uses, the indicator will flash blue when the toothbrush is turned on, reminding you to replace the brush head.
Low Battery Reminder
- Flashing red light
When the battery is low, the indicator light will flash red to remind you to charge the toothbrush.
Charging Display
- Breathing green light
The light will flash green in a breathing pattern when charging. Once fully charged, the light will stay green without breathing. A full charge typically takes 3 hours.
Specification
Product Type: Sonic Clean 1000
Working Mode: Clean/ White/ Clean+/ GumCare / Sensitive
Rated Power: 3W
Switch Mode: Button Switch
Display Mode: LED llght
Using Time: 360min sensitive mode
Charging Time: 2-3hours
Charging Current: 360±30mA
Waterproof level: IPX7
Power Reminder: Indicator light flashing at low power
Executive Standards:
How To Use
-
CORRECT INSTALLATION
Align the front of the brush head with the front of the toothbrush handle.
Tip: The toothbrush is delivered pre-charged and ready for use. -
RINSE BRUSH AND APPLY TOOTHPASTE
Rinse the bristles with running water, and apply an appropriate amount of toothpaste. -
SELECT MODE
Press the power button to turn the toothbrush on. You can switch between modes by briefly pressing it when the mode indicator displays a ·breathing· light pattern. -
BRUSHINC METHODS
Move the toothbrush slowly at a 45-degree angle to your gum line and brush evenly throughout your mouth for 2 minutes. Your Sonic Clean 1000 toothbrush will pause every 30 seconds, signifying it’s time to brush another area of your mouth. The toothbrush automatically stops at the end of the timer.
Tip: There is no need to manually brush up and down during this process. Just move in a slow, circular motion, and do not apply excess pressure. -
CLEANINC
Rinse your mouth with water and do the same with the toothbrush to remove bacteria and the remaining toothpaste.
Your 2-Minute Brushing Guide
Modes
-
CLEAN
38000 reps/min
Clean and teeth protection -
WHITE
42000 reps/min
Toothwash level white -
CLEAN+
39000 reps/min
Clean teeth deeply -
GUMCARE
33000 reps/min
Gentle massage of gums -
SENSITIVE
31000 reps/min
Gentle care
How to Charge Your Tooth bush
TYPE-C DIRECT-CONNECTION CHARGING
The indicator light flashing red means that your toothbrush needs to be recharged. Follow the steps below to charge it:
Open the bottom cover of the electric toothbrush. Then connect the Type-C interface of your USB cable to the port at the bottom of the toothbrush. Finally, connect the other end of the USB cable to the power adapter.
While charging, the indicator light displays a “breathing· light pattern. When the toothbrush is fully charged, the indicator light remains lit.
Tip: An additional rubber shell inside the bottom cover must also be uncovered to display the Type-C interface. When you finish charging, please ensure that both the rubber shell and bottom cover are tightly closed to protect the motor from water. Attention: Please use UL standard SV IPX-4 wall adapter (Type A) only
To avoid dangerous incidents, do not place near metal objects or water when charging.
Attention: Please use Hyslor power adapter coming with the package or any other USB port charging device.
Customer Service
Limited Warranty and Extend Warranty Program
Hyslor warrants this product to be free of defects in faulty materials and workmanship under normal use for one year from the date of purchase. We present the Extend Warranty Program for VIP members, which ensures that you keep enjoying the product for an additional year. Please email ONE YEAR EXTENTION and your ONLINE ORDER NUMBER as subject to support@hyslor.com. You will be our VIP member and get access to two-year warranty. This warranty does not cover damages caused by misuse, abuse, neglect, dropping. tampering. alteration or unauthorized repair: normal wear and tear, including chips, scratches, abrasions, discoloration or fading: brush heads and products without sufficient proof of purchase.
Subscribe
As a VIP member, you will be automatically subscribed to receive exclusive promotion of our new beauty and personal care products. If you want to unsubscribe, reply UNSUBSCRIBE to support@hyslor.com.
If you have any questions about your product or personal oral care, please
don’t hesitate to tell us. Your satisfaction is most important!
For faster service, locate the product name and your online order number in
your email.
Email: support@hyslor.com
Frequently Asked Questions
Q: How does the pressure sensor behave?****
A: Hyslor adopts a new visible pressure sensor – the LED warning light will start flashing orange when you apply too much pressure, protecting your enamel and gum health.
Q: Where can I buy a toothbrush head? How often do I need to change the toothbrush head?****
A: You can search Amazon with the phrase ·Hyslor toothbrush head” to find replacements. We recommend that you replace your toothbrush head after 3 months of use (based on brushing twice a day for 2 minutes each session).
Q: How long will it take to fully charge the battery? Can I use it before It’s fully charged?****
A: It can take up to 3 hours to fully charge the battery. Yes. you can use the toothbrush before it is fully charged.
Q: Can I use my electric toothbrush In the shower?****
A: Of course. Your Hyslor toothbrush is IPX7 waterproof. Just remember to close the bottom cover tightly.
Q: What if the vibration of the toothbrush seems to be getting weaker and weaker?****
A: The connection between the toothbrush head and the host is too tight. Please remove the toothbrush head and install it again.
Q: I cannot fully attach the brush head. There Is a gap between the brush head and the handle.****
A: This is normal. A small gap is necessary to allow movement in order to deliver the vibrations needed to clean your teeth.
Q: What should I do If the electric toothbrush cannot be started?****
A: Please charge it first to ensure it has sufficient power. If it still doesn’t work, please contact us via support@hyslor.com for resolution.
Q: Can the battery of the toothbrush be replaced?****
A: No, you cannot replace the toothbrush’s integrated battery. If you dispose of your toothbrush. it is recommended that you remove the battery and recycle it.
Q: I have charged the brush, but the battery life is still very short.****
A: The battery life depends on how many times you use it daily and which vibration mode you choose. If you use the toothbrush more than twice a day at a higher vibration mode, the battery life might be shorter than advertised. Also, please ensure that the toothbrush is flat when charging; putting it in another position could result in a poor charging effect.
Q: The electric toothbrush handle is hot while using or charging.****
A:. It is normal for the electric toothbrush handle to heat up while using or charging. Our lithium ion battery is compliant with the Federal Aviation Administration Pack Safe. Devices containing lithium ion batteries should be carried in carry-on baggage according to FAA. If the toothbrush handle is abnormally hot, stop using or charging the product and contact our customer service.