HOBO U22-001 Water Temperature Pro v2 Data Logger User Manual
- October 30, 2023
- Hobo
Table of Contents
HOBO® Water Temp Pro v2 (U22-001) Quick Start
U22-001 Water Temperature Pro v2 Data Logger
-
Open HOBO ware software. (Get the latest software at www.onsetcomp.com/hoboware-free-download.)
-
Attach the USB Optic Base Station (BASE-U-4) or HOBO Waterproof Shuttle (U-DTW-1) to a USB port on the computer (refer to the hardware manual at www.onsetcomp.com/support/manuals/10366 for details).
-
Attach the coupler (COUPLER-C) to the base station or shuttle, then insert the logger into the coupler so that the bump on the logger slides into the groove of the coupler. There is also an arrow etched on the logger case showing the direction the logger
should be inserted into the coupler. If you are using the HOBO Waterproof Shuttle, make sure it is connected to the USB port on the computer and briefly press the coupler lever to put the shuttle into base station mode. It may take a few seconds for new hardware to be detected by the computer.
-
From the Device menu, select Launch. Select the logging options and click Start. Logging will begin based on the settings you selected.
-
Deploy the logger. Depending on water conditions and desired measurement location, the logger should be appropriately weighted, secured, and protected. Place the included cap over the communications window to protect it from fouling and abrasion or use the optional boot (BOOT-BLK or BOOT-WHT) for high fouling environments and for protection against very cold temperatures (which can make the case brittle and prone to fracture) or repeated pounding and abrasion caused by turbulent flow. See the logger manual at www.onsetcomp.com/support/manuals/10366 for complete deployment details.
-
To read out the logger, remove it from the water. Follow steps 1–3 and select Read Out from the Device menu in HOBO ware or use the Waterproof Shuttle. Refer to the HOBO ware Help for complete details on reading out and viewing data.
For more information about this logger, scan the code at left or go to www.onsetcomp.com/support/manuals/10366.
U.S. and International Sales: 1-508-759-9500 www.onsetcomp.com/support/contact
© 2017–2023 Onset Computer Corporation. All rights reserved. Onset, HOBO, and
HOBO ware are registered trademarks of Onset Computer Corporation. All other
trademarks are the property of their respective companies.
This product has been manufactured by Onset Computer Corporation and in
compliance with Onset’s ISO 9001:2015 Quality Management System.
21827-C MAN-U22-QSG
References
- HOBOware - Software Updates | Onset's HOBO and InTemp Data Loggers
- Technical Support | Onset's HOBO and InTemp Data Loggers
- HOBO Water Temp Pro v2 (U22-001) User's Manual | Onset's HOBO and InTemp Data Loggers
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>