BLUE WEAR 016230 Work Gloves 35X4522 Instruction Manual
- October 30, 2023
- BLUE WEAR
Table of Contents
ROUGH WORKWEAR
35X4522
16-515X4545
ASSEMBLY GLOVES
Size/Rozmiar: 9
Size range/: 7-11
016230 Work Gloves 35X4522
WARNING! Gloves shall not be worn when there is a risk of entanglement by
moving parts of machine.
The durability of the gloves depends on how they are used. Always check that
the gloves are in good condition before using them. Keep the gloves in a
clean, dry and ventilated place, free from moisture, dirt, mould and sunlight.
Do not leave the gloves in contaminated condition if they are going to be
reused. Remove as much as possible of any contamination from the gloves after
using them. Dispose of in accordance with current legislation. The materials
used are not known to cause allergies. If any reaction occurs discontinue use.
EU DECLARATION OF CONFORMITY
Item number 016526, 016521, 016522, 016523, 016524
Jula AB, Box 363, SE-532 24 SKARA, SWEDEN
This declaration of conformity is issued under the sole responsibility of the manufacturer.
ASSEMBLY GLOVES PU
Size 7, 8, 9, 10, 11
Conforms to the following directives, regulations and standards:
| Directive/Regulation | Harmonised standard |
|---|---|
| PPE (EU) 2016/425 | EN ISO 21420:2020, EN 388:2016+A1:2018 |
Cat II
The PPE is identical to the PPE which is subject of EU type examination
certificate No:| 0075/2169/162/10/21/1784
---|---
Name and address of the notified body involved:| CTC Parc Sc. T. Garn. – 4,
rue Herm. Frenkel, 69367 Lyon Cedex 07, France
NB 0075
This product was CE marked in year:
Skara 2022-03-01
Maria Sihvonen Grahn
BUSINESS AREA MANAGER
EN 388:2016+
A1:2018 Cat II
Tested on glovespalm
X Product not assessed for this property.
Item no. 016526
Jula AB
www.jula.com
Box 363, SE-532 24 Skara
Made in China
Notified body/Jednostka notyfikowana No. 0075:
CTC, Parc Sc. T. Garn. – 4, rue Herm.
Frenkel 69367 Lyon Cedex 07, France.
These gloves bears CE marking to
demonstrate compliance with Regulation
(EU) 2016/425 Personal Protective
Equipment and meet the standards
EN ISO 21420:2020, EN 388:2016+A1:2018.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>