RYOBI Electric Zero Turn Mower & String Trimmer Instruction Manual
- October 30, 2023
- RYOBI
Table of Contents
RYOBI Electric Zero Turn Mower & String Trimmer
Product Information
The Electric Zero Turn Mower (RYRM8003/RYRM8003CAN) is a riding lawn mower that is designed for efficient mowing of large lawns. The product comes with a comprehensive assembly guide and instruction manual that provides detailed information on how to assemble and operate the mower safely. The mower has a powerful electric motor that can be controlled using a joystick, allowing the user to make precise turns and navigate around obstacles with ease. The product also features a durable frame, comfortable seat, and adjustable cutting height, making it an ideal choice for homeowners with large lawns.
Product Usage Instructions
- Before assembling the mower, scan the QR code provided in the manual to view an instructional video.
- Ensure that all parts are present and undamaged before proceeding with the assembly.
- Strictly adhere to all torque wrench tightening specifications during assembly to avoid serious personal injury.
- Assemble the mower on a level surface to prevent instability and ensure proper functioning.
- Use the tools provided in the kit or obtain the necessary tools (torque wrench, socket wrench with 12mm and 14mm sockets and 6mm hex bit, tire pressure gauge) before beginning the assembly process.
- Remove all packaging material from the unit and parts, but do not discard until you have carefully inspected and satisfactorily operated the product.
- Once assembled, adjust the cutting height as desired, and use the joystick to control the electric motor for precise turns and easy navigation around obstacles.
- Refer to the instruction manual for maintenance and safety guidelines to ensure a long-lasting and safe operation of the product.
Scan the QR Code to view an instructional video
Follow all instructions when assembling this riding lawn mower. If any parts are damaged or missing, those parts must be replaced before proceeding.
WARNING: To reduce the risk of injury, you must read and understand this assembly guide before attempting to assemble this product.
SAVE THIS GUIDE FOR FUTURE REFERENCE
RULES FOR SAFE ASSEMBLY
at any time, without notice and without incurring any obliga-tion to make
the same or similar changes to any products previously built or sold.
- Any person attempting to assemble this product must have proper training and experience. Read this manual carefully and follow all assembly procedures as described.
- All assembly must be completed with the unit on a level surface.
SYMBOLS
The following signal words and meanings are intended to explain the levels of
risk associated with this product.
SYMBOL SIGNAL MEANING
- DANGER: Indicates a hazardous situation, which, if not avoided, will result in death or serious injury.
- WARNING: Indicates a hazardous situation, which, if not avoided, could result in death or serious injury.
- CAUTION: Indicates a hazardous situation, that, if not avoided, may result in minor or moderate injury.
- NOTICE: (Without Safety Alert Symbol) Indicates information considered important, but not related to a potential injury (e.g. messages relating to property damage).
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL/NAME/DESIGNATION/EXPLANATION
- Safety Alert: Indicates a potential personal injury hazard.
- Electricity: This product is considered to have hazardous voltage.
TOOLS NEEDED
The following tools (not included or drawn to scale) are needed for assembly:
UNPACKING
- Before you unpack, scan the QR code below to view an instructional video.
- Remove the bolts securing the corner and side braces to the frame bottom, then lift the braces to remove.
- Cut the nylon straps securing the front and rear wheel axles to the frame.
- Remove boxes containing loose parts, assembly hardware, and documentation.
- Remove and set aside all accessible packaging and wrap from unit and parts. Do not discard the packing material until you have carefully inspected and satisfactorily oper-ated the product.
WARNING: If any parts on the Loose Parts List are already assem-bled to your product when you unpack it, verify the part is assembled correctly, is properly tightened, and is torqued correctly (where applicable) before proceeding to the next assembly step. Use of a product that may have been improperly assembled could result in death or serious personal injury.
- Inspect the product carefully to make sure no breakage or damage occurred during shipping.
- If any parts are damaged or missing, please call
1- 800-525-2579 for assistance.
NOTE : Mower should be assembled while positioned on the frame bottom. Once assembly is complete, raise the cutting deck to its highest position, position a ramp next to the frame bottom, release the parking brake and slowly and carefully drive mower off frame.
WARNING: Use extra care when driving the mower off of the frame. Press the low speed drive button and carefully move the joystick and/or press the brake pedal as needed to con-trol the speed. When driving the mower off of the frame, do not exceed the maximum recommended operation angle of 15°. Failure to follow these instructions can result in loss of control and result in death, serious personal injury, or property damage.
NOTICE: If no ramp is available, slowly and carefully drive the mower off the frame in reverse while looking down and behind. Driving the mower off the frame in the forward direction without a ramp can cause damage to the mower’s cutting deck.
LOOSE PARTS LIST
Key
No. Description Qty.
- Assembly Guide (Not Shown )………………………….1
- Operator’s Manual (Not Shown). ………………………1
WARNING: If any parts are damaged or missing do not assemble this product until the parts are replaced with new original manufacturer’s parts or their equivalent. Assembly of this product with damaged, missing, or incorrect parts could result in serious personal injury.
ASSEMBLY
WARNING: Strictly adhere to all torque wrench tightening specifications. Failure to do so could cause serious personal injury. Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. To prevent accidental starting that could cause serious personal injury, always remove the start key from the tool when you are assembling parts.
INSTALL THE SEAT BACK
See Figure 1.
- Remove the bolts from the nuts fastened to the seat bottom frame.
- Place the seat back assembly over the outer edges of the bottom frame mounting brackets and align the holes. Allow the tab on the seat back to rest against the bottom frame to assist in the alignment.
- Thread the bolts into the nuts that are fastened to the bottom frame. Hand tighten each bolt.
NOTE: The mower is shipped with an installed bolt on each side of the seat back that has been left loosened to aid in bracket alignment. Once the lower two bolts are installed, tighten all three bolts on both sides to 40.5 ft-lb.
INSTALL THE JOYSTICK
See Figure 2.
- Insert the joystick through the dust cover as shown.
- Align the holes on the joystick to the holes on the mounting shaft.
- Insert the hex screws and tighten securely with the included hex key.
- Align the tabs on the dust cover with the base and press down to lock the dust cover into place.
INSTALL THE TOWING PLATE
See Figure 3.
- Align the holes in the towing plate with the holes in the rear crossmember.
- Install two hex head bolts and tighten securely
CONNECTING THE 80V BATTERIES
See Figures 4 – 5.
When shipped from the factory, the mower’s batteries are disconnected.
To connect:
- Place the joystick in the neutral and locked position. (See Learning to Drive the Mower in the operator’s manual.
- Adjust the seat all the way forward.
- Press the center edge on the battery compartment cover to release the latch. The cover will raise to gain access to the compartment below.
- Install the battery pack’s quick-connect plugs. This plug connects the batteries to the mower.
NOTE: Be sure each battery latch is locked to secure the batteries.
- Lower the lid to the battery compartment and press on the center edge to engage the lock.
- Make sure the battery compartment cover is securely locked before readjusting the seat. Check
WARNING:
Make sure the latch on the bottom of the battery packs snaps in place and the
battery pack is fully seated and secure in the mower’s battery port before
beginning operation. Failure to securely seat the battery packs could cause
the battery packs to fall out, resulting in serious personal injury.
For complete charging instructions, refer to the Operator’s Manuals for your battery packs and charger models
ASSEMBLY
FINAL PREPARATION
CHECK TIRE PRESSURE
Check the air pressure in all tires before use. Improper air pressure will
affect handling, steering response, traction, tire life, level cutting, and
operator comfort. Be sure tires are inflated to the pressure shown below.
NOTE: Tire pressure should only be measured or adjusted when tires are cold.
CHARGE THE MOWER
See Figure 9.
Mower batteries must be fully charged before first use. To verify mower
batteries are fully charged, check the battery level indicator.
To charge:
- Insert charger plug into charging port on mower, making sure it is properly connected.
- Connect charger to power supply using normal household current of 120 V, AC only, 60 Hz.
- Do not charge in an area of extreme heat or cold.
- Remove the charger from the mower once it is fully charged and ready for use.
WARNING: To avoid accidental starting or movement of the mower that could
result in death or serious personal injury, always remove the start key and
set the parking brake when leaving the mower unattended.
NOTICE: Always connect the mower to the charger when the unit is not in
use. If it is not possible to leave the mower charger connected, make sure to
charge the batteries fully at least once a month.
TEST THE SAFETY INTERLOCK SYSTEM
See Figure 10.
This mower features a Safety Interlock System to protect the operator by
shutting off the blades if the operator leaves the seat with the blades
running. Test the system to be sure it is working correctly
To test :
- Position the mower on a level surface.
- Set the parking brake.
- Make sure the joystick is in the locked, neutral position and blade engage knob is down.
- Install start key and turn to ON position.
- Raise blade engage knob to activate blades.
- Briefly lift off the seat, but do not get off the mower.
The blades should shut off within 5 seconds. If they don’t, verify you connected the safety interlock cable as described on page 6. If the cable is connected but the system still doesn’t function, contact customer service. Do not operate the mower until the safety interlock system has been repaired
VERIFY MOWER CONDITION
Inspect the entire product for damaged, missing, or loose parts such as
screws, nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do
not operate this product until any missing or damaged parts are replaced.
MORE INFO
PARTS AND SERVICE: Prior to requesting service or purchasing replacement parts, please obtain your item, manufacturing, and serial numbers from the product data plate.
- ITEM NO.___
- MANUFACTURING NO.__
- SERIAL NO.__
Model/item number on product may have additional letters at the end. These letters designate manufacturing information and should be provided when calling for service.
- HOW TO OBTAIN REPLACEMENT PARTS: Replacement parts can be purchased online at www.ryobitools.com or by calling 1-800-525-2579. Replacement parts can also be obtained at one of our service centers.
- HOW TO LOCATE A SERVICE CENTER: Service centers can be located online at www.ryobitools.com or by calling 1-800-525-2579.
- HOW TO OBTAIN CUSTOMER OR TECHNICAL SUPPORT: To obtain customer or technical support please contact us at 1-800-525-2579.
TTI OUTDOOR POWER EQUIPMENT, INC.
- ADDRESS: P.O. Box 1288, Anderson, SC 29622, USA
- TELL: 1-800-525-2579
- WEB: www.ryobitools.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>