Uvex U-Fit Disposable Gloves Instructions
- October 30, 2023
- uvex
Table of Contents
Uvex U-Fit Disposable Gloves
Product Information
The uvex u-fit gloves are safety gloves designed to protect against chemical risks. The basic glove material is made of nitrile butadiene rubber (NBR) and does not have any lining. The gloves are available in four different sizes – S, M, L, and XL. The smallest packing unit contains 100 pieces of gloves. The gloves are marked with pictograms and performance levels according to EN 374:2003, with the lowest performance level being 1 and the highest being 6. The sampling for penetration testing is done by the general inspection level in accordance with DIN 2859, part 1 with AQL 1.5. The gloves must be disposed of when the permeation time expires.
Usage Instructions
Before using the gloves, check them thoroughly for any damage or defects. Do not use defective gloves. The actual period of protection on the job may differ from the performance level due to various factors such as temperature and abrasion.
Cleaning the gloves is only possible when not working with aggressive chemicals. To clean, rinse the gloves carefully under lukewarm running water.
Store the gloves in a dark, dry place. After contamination, a change in performance cannot be excluded. If the gloves come into contact with chemicals, please consult the chemical manufacturer’s waste disposal guidelines. Do not wear gloves where there is a risk of being caught in moving machinery parts.
Specification
- Type uvex u-fit
- Basic glove material no lining
- Available sizes S, M, L, XL
- Coating material Material: NBR (nitrile butadiene rubber)
- Smallest packing unit 100 Pieces
Pictogram and performance levels
- EN 374: 2003
Pictogram and performance levels according to EN 374:2003 (lowest performance level: 1/highest performance: 6) The sampling for penetration testing is made by the general inspection level in accordance with DIN 2859, part 1 with AQL 1.5.
Please note:
The actual period of protection on the job is affected by many factors
(temperature, abrasion, etc.) and can therefore differ from the performance
level!
EC notified body
SATRA Technology Centre
Wyndham Way, Telford Way, Kettering · NN16 8SD Northamptonshire, United
Kingdom
- No.: 0321
Cleaning
Cleaning only possible when not working with aggressive chemicals. Carefully rinse gloves under lukewarm running water.
Storage: Store in a dark, dry place.
Handling
Thoroughly check before use for damage. Defective gloves should not be used. All technical data refers to the state of the gloves at delivery, unused, not stretched and at ambient temperature (EN 374). Gloves must be disposed of when the permeation time expires. After contamination, a change of performance cannot be excluded. We are not aware of any substances in this product that could cause an allergic reaction.
Disposal
The gloves should be disposed of properly as household waste. If they come into contact with chemicals, please consult the chemical manufacturer’s waste disposal guidelines.
Warning
Gloves should not be worn where there is a risk of being caught in moving
machinery parts.
Contact Information
Manufacturer
- UVEX SAFETY Gloves GmbH & Co. KG Elso-Klöver-Str. 6, 21337 Lüneburg Postfach 24 47 · 21314 Lüneburg GERMANY.
- Tel.: +49 4131 9502-0
- Fax: +49 4131 84338
- Email: [email protected].
- Website: uvex-safety.de.