DOMO DO8141 Freestanding Fan Instruction Manual

DOMO DO8141 Freestanding Fan

Product Information

DO8141 Ventilator

The DO8141 is a high-quality fan that has undergone strict quality control measures before being offered to customers. The product comes with an instruction manual that contains information on the product’s usage, safety instructions, and parts.

• The fan features a grill, control panel, extendable tube, blocking ring, foot mounting with four legs, handle, ventilator blades, oscillation button, and remote control.
• The effective range of the remote control is within 5m distance and 30-degree deflection in front of the product.
• The warranty period for accessories and parts that undergo wear and tear is six months.

Product Usage Instructions

Before using the DO8141 Ventilator, read the user manual carefully and keep it for future reference.

Safety Instructions

• Do not use the fan near water or in a damp environment.
• Do not insert any object into the fan’s openings or use the fan if any parts are damaged.
• Do not place the fan near a heat source or flammable materials.
• Do not use the fan if the power cord is damaged or frayed.
• Keep the fan out of reach of children and pets.

Assembly Instructions

1. Align screw holes on the outer ring of both the front and rear guards with the positioning clip aligned as illustrated in the product manual.
2. Press down all the buckles to fasten the front guard with the rear guard. At the screw holes with the positioning clip aligned, tighten the separated screw and nut.
3. Install the motor shaft and align the column pipe with holes on the support and tighten screws.
4. Screw the lock nut of the grill clockwise and, at the same time, fix the rear grill.
5. Make sure to remove parts from the component before performing installation.

Usage Instructions

1. Place the four legs of the foot mounting in the foot mounting and ensure that the legs fit snugly.
2. Connect the power cord to a power source and turn on the fan using the ON/OFF key on the control panel or remote control.
3. Adjust the fan’s speed using the SPEED key on the control panel or remote control.
4. Press the oscillation button to enable or disable oscillation.
5. Use the TIMER key to set a timer for the fan to turn off automatically.
6. To adjust the height of the fan, loosen the blocking ring and slide the extendable tube to your desired height. Lock the tube in place by tightening the blocking ring.

If you encounter any problems with your DO8141 Ventilator, contact the customer service team for assistance.

WARRANTY

Dear client ,
All of our products are always submitted to a strict quality control before they are sold to you. Should you nevertheless experience problems with your device, we sincerely regret this.
In that case, we kindly request you to contact our customer service.
Our staff will gladly assist you.

• +32 14 21 71 91
• info@linea2000.be.

Monday – Thursday: 8.30 – 12.00 and 13.00 – 17.00
Friday: 8.30 – 12.00 and 13.00 – 16.30

This appliance has a two year warranty period. During this period the manufacturer is responsible for any failures that are the direct result of construction failure. When these failures occur the appliance will be repaired or replaced if necessary. The warranty will not be valid when the damage to the appliance is caused by wrong use, not following the instructions or repairs executed by a third party. The guarantee is issued with the original till receipt. All parts, which are subject to wear, are excluded from the warranty.
If your device breaks down within the 2-year warranty period, you can return the device together with your receipt to the shop where you purchased it.
The guarantee on accessories and components that are liable to wear-and-tear is only 6 months.
The guarantee and responsibility of the supplier and manufacturer lapse automatically in the following cases:

• If the instructions in this manual have not been followed.
• In case of incorrect connection, e.g., electrical voltage that is too high.
• In case of incorrect, rough or abnormal use.
• In case of insufficient or incorrect maintenance.
• In case of repairs or alterations to the device by the consumer or non-authorised third parties.
• If the customer used parts or accessories that are not recommended or provided by the supplier / manufacturer..

SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be taken, including the following:

• Read all instructions carefully. Keep this manual for future reference.
• This appliance may be used by children from the age of 16 and up, and also by persons with a physical or sensorly limitation, as well as mentally limited persons or persons with a lack of experience and knowledge. But only on the condition that these persons have received the necessary instructions on how to use this appliance in a safe way and know the dangers that can occur by using this appliance.
• Children cannot be allowed to play with the appliance.
• Maintenance and cleaning of the appliance may not be done by children, unless they are older than 16 years old and are under supervision. Keep the appliance out of reach of children younger than 16 years old.

This appliance is suitable to be used in a household environment and in similar surroundings such as:

• Kitchen for personnel of shops, offices or other similar professional surroundings
• Farms
• Hotel or motel rooms and other surroundings with a residential character
• Guest rooms or similar
• Attention: This appliance cannot be used with an external timer or a separate remote control.
• Before use, check if the voltage stated on the appliance corresponds with the voltage of the power net at your home.
• Do not let the cord hang on a hot surface or on the edge of a table or counter top.
• Never use the appliance when the cord or plug is damaged, after malfunction or when the appliance itself is damaged. In that case, take the appliance to the nearest qualified service center for check-up and repair.
• Close supervision is necessary when the appliance is used near or by children.
• The use of accessories that are not recommended or sold by the manufacturer can cause fire, electrical shock or injuries.
• Unplug the appliance when it is not in use, before assembling or disassembling any parts and before cleaning the appliance. Put all buttons and knobs into the ‘off’ position and unplug the appliance by grasping the plug. Never unplug by pulling the cord.
• Do not leave a working appliance unattended.
• Never place this appliance near a gas stove or electrical stove or in a place where it may come into contact with a warm appliance.
• Do not use the appliance outdoors.
• Only use the appliance for its intended use.
• Always use the appliance on a steady, dry and level surface.
• Only use the appliance for domestic use. The manufacturer can not be held responsible for accidents that result from improper use of the appliance or not following the instructions described in this manual.
• All repairs should be carried out by the manufacturer or its aftersales service.
• Never immerse the appliance, the cord or the plug in water or any other liquid.
• Make sure that children do not touch the cord or appliance.
• Keep the cord away from sharp edges and hot parts or other heat sources.
• Before use, remove all packaging materials and any promotional stickers.
• Do not use this fan in any wet or humid areas. Do not place the fan too close to a bath tub or any other water container.

PARTS

1. Grill
2. Control Panel
3. Telescopic tube
4. Clamp
5. Base mount with 4 feet
6. Handle
7. Fan blades
8. Oscillation button
9. Remote control

ASSEMBLY

FASTENING THE BASE AND THE MOTOR
Position the four feet of the base in the base mount. Make sure that the feet are inserted properly.
Position the telescopic tube in the base mount and fasten the tube with the pinion and the butterfly screw.
Loosen the clamp and extend the top part of the tube completely and block the tube at this height by tightening the clamp again.
Make sure that the clamp is tightened before mounting the motor. Loosen the large screw at the back of the control panel (a). Place the motor on the telescopic tube. Tighten the large screw again, making sure that the screw is aligned with the recess in the telescopic tube. The large screw must be fully tightened prior to using the fan.

FASTENING THE GRILL AND THE FAN BLADES
Place the back of the grill on the motor drive. Secure it using the open plastic screw. Place the fan blades on the motor drive. Make sure the pin on the motor drive fits perfectly behind the fan blades. Secure the fan blades on the motor drive using the closed plastic screw

Position the front grill on the rear grill and fasten them together with the help of the attaching clip.

USE

Put the plug in the mains. Switch the fan on with the button: ON/OFF

CONTROL PANEL

1. Speed control
2. Timer
3. On-off button
4. Indicator light for speed
5. Indication light for timer

REMOTE CONTROL

1. Speed: speed control
2. ON/OFF: on-off button
3. Timer

SPEED

Select the desired air speed by pressing cted speed will be indicated on the LED display:
:low speed
: medium speed
: high speed

TIMER

You can set the timer from 1 hour upto 7 hours with the TIMER button. The set time is indicated on the LED display. It is the sum of the time indications next to which the red dot is lit. So:

The fan will automatically switch off when the set time has passed.

OSCILLATION
To allow the fan to oscillate, push in the oscillation button. To stop the fan from oscillating, pull the button up. When it is switched on, it will alternately turn to left and right to better spread the air.

DIRECT THE VENTILATION
To direct the ventilation up or down, push down or pull up gently on the grill to adjust the direction up or down.

HEIGHT OF THE FAN
The height of the fan can be adjusted by loosening the clamp and lengthening or shortening the telescopic tube. Then tighten the clamp firmly before turning the fan on.

CLEANING AND MAINTENANCE

• This fan requires very little maintenance. Never try to repair the fan yourself. If it is defective, have it checked and/or repaired by a qualified person.

• Prior to assembling the fan or cleaning it, remove the plug from the outlet.

• Keep the rear grill free of dust and other substances in order to allow free circulation of the air around the motor. Do not disassemble the fan to remove dust from the motor.

• You may clean the exterior of the machine with a soft moist cloth and a mild detergent.
  Carefully dry the machine afterwards.

• Never use corrosive or abrasive products to clean the machine.

• Make sure that no water gets into the motor of the machine.

ENVIRONMENTAL GUIDELINES

This symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it must be brought to the applicable collection point for recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
The packaging is recyclable. Please treat the packaging ecologically.

ORDER the original Domo accessories and parts online at: webshop.domo- elektro.be

LINEA 2000 bvba – Dompel 9 – 2200 Herentals – Belgium – Tel: +32 14 21 71 91 – Fax: +32 14 21 54 63

References

• www.ELEKTROKOLA.cz - Crussis, Ghost, Kellys, Leader Fox, Pells, Specialized - doprava zdarma

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>