RYOBI RWDV184 4L Wet and Dry Compact Vacuum Instruction Manual
- October 30, 2023
- RYOBI
Table of Contents
RWDV184 4L Wet and Dry Compact Vacuum
Instruction Manual
IMPORTANT!
It is essential that you read the instructions in this manual before
assembling, operating, and maintaining the product.
Subject to technical modifications.
Safety, performance, and dependability have been given top priority in the
design of your wet/dry vac.
INTENDED USE
The wet/dry vac is intended for wet and dry vacuuming and blowing in workshop,
household and similar non-industrial applications. The product can also be
used for vacuuming dust and debris directly from ONE+ power tools.
Do not use the product for any other purpose.
WET/DRY VAC SAFETY WARNINGS
- This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety. Children should be supervised to ensure that they do not play with the product.
- The product is intended for household use only.
- Never vacuum materials such as hot coals, cigarette butts, matches, etc.
- Do not use the product without the filter in place.
- Use extra care when using the product on stairs.
- Do not use the product to pick up hard objects such as nails, screws, coins, etc. Damage or injury could result.
- Always close the battery cover and lock it in place before use. Do not expose the battery pack to rain or wet conditions.
- Remove the battery when the product is not in use or when changing accessories.
- Rechargeable batteries are to be removed from the product before being charged.
- Exhausted batteries are to be removed from the product and safely disposed of.
- If the product is to be stored unused for a long period, the batteries should be removed.
- The supply terminals are not to be short-circuited.
SAFETY WARNINGS FOR BLOWER
- Wear a face filter mask in dusty conditions to reduce the risk of injury associated with the inhalation of dust.
- Do not point the blower nozzle in the direction of people or pets.
- Never place objects inside the nozzle or hose.
- Do not operate the product near open windows.
- Slightly dampen surfaces in dusty conditions.
- Do not place the product on top of or near loose debris. Debris may be sucked into intake vent resulting in possible damage to the product.
- Do not operate the product with defective guard, enclosure or shields.
- Always be sure of the footing on slopes and to walk, never run.
- Do not touch moving hazardous parts before the product is disconnected from the power supply/battery pack and the moving hazardous parts have come to a complete stop.
- Always wear substantial footwear and long trousers while operating the product.
- If the product is dropped, suffers heavy impact or begins to vibrate abnormally, immediately stop the product and inspect for damage or identify the cause of the vibration. Any damage should be properly repaired or replaced by an authorised service centre.
ADDITIONAL BATTERY SAFETY WARNINGS
- To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc., can cause a short circuit.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national provisions and
regulations.
Follow all special requirements on packaging and labelling when transporting
batteries by a third party. Ensure that no batteries can come in contact with
other batteries or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps or tape. Do not
transport batteries that are cracked or leaking. Check with the forwarding
company for further advice.
MAINTENANCE
- Use only original accessories and spare parts. Should components need to be replaced which have not been described, please contact an authorised service centre. All repairs should be performed by an authorised service centre.
- Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon dust, etc.
- Do not at any time let brake fluids, gasoline, petroleumbased products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.
SYMBOLS
| Safety Alert
---|---
V| Volts
| Direct current
| Regulatory Compliance Mark (RCM). Product meets applicable regulatory
requirements.
| Please read the instructions carefully before starting the product.
| Do not dispose of waste batteries, waste electrical and electronic
equipment as unsorted municipal waste.
Waste batteries and waste electrical and electronic equipment must be
collected separately.
Waste batteries, waste accumulators, and light sources have to be removed from
the equipment.
Check with your local authority or retailer for recycling advice and
collection point.
According to local regulations, retailers may have an obligation to take back
waste batteries and waste electrical and electronic equipment free of charge.
Your contribution to the reuse and recycling of waste batteries and waste
electrical and electronic equipment helps to reduce the demand of raw
materials.
Waste batteries, in particular containing lithium, and waste electrical and
electronic equipment contain valuable and recyclable materials, which can
adversely impact the environment and the human health if not disposed of in an
environmentally compatible manner.
Delete personal data from waste equipment, if any.
SYMBOLS IN THIS MANUAL
**** | Note |
---|---|
Parts or accessories sold separately |
Know your product
Getting started
Operation
|
---|---
Maintenance
PRODUCT SPECIFICATIONS
18V 4L Wet & Dry Compact Vacuum
Model | RWDV184 |
---|---|
Voltage | 18 V **** |
Air watts | 55 AW |
Suction | 7.5 kPa |
Air flow volume | 1104.3 L/min |
Dust storage capacity | 4 L |
IP rating | IPX4 |
Weight – excluding battery pack | 3 kg |
Replacement parts
Washable filter| 312711005
BATTERY
Compatible battery pack (not included)
RB18L13
RB18L15
RB18L15A
RB18L15B
RB18L20
RB18L20A| RB18L25
RB18L25A
RB18L40
RB18L40A
RB18L50
RB18L50A| RB18L60A
RB1815C
RB1820C
RB1825C
RB1840C| RB1840X
RB1850C
RB1850X
RB1860X
---|---|---|---
Imported by:
Techtronic Industries Australia Pty Ltd
31 Gilby Road, Mount Waverley, VIC 3149
Melbourne, Australia
Techtronic Industries N.Z. Limited
Unit C, 70 Business Parade South,
Highbrook, Auckland 2013, New Zealand
RYOBI is a trade mark of Ryobi Limited, and is used under license.
20230208v1D
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>