VIKING M302 Wireless Microphone User Manual

Wireless microphone
M302 / Jack 3.5mm –
User manual

Thank you for choosing a VIKING product.
The VIKING M302/Jack 3.5mm is a smart wireless microphone that provides professional recording output. No additional application installation is required and you can use it for most devices that support audio recording. It can be used in many ways: online live streaming, Vlog video recording, program interview, recording, instructional videos and
more.
The wireless microphone consists of three parts (See Figures 1 and 2 and 3), one is the housing, the other is the microphone transmitter 2x and the third is the Jack 3.5mm receiver.
Step 1: Connect the receiver to your device. The connection is successful if the LED on the receiver flashes green.
Step 2: Remove the transmitter from the housing. The LED on the transmitter will flash green.
Step 3: Once the transmitter is paired with the receiver, the LEDs stop flashing and glow a steady green light. At this point, you can record audio using any app or program on your device.

Description:

Case (fig.1)

1. LED indicator

2. USB-C charging input
   Transmitter 2x (fig.2)

3. LED indicator

4. Reset button

5. Clip for attachment

6. Metal contact
   Receiver (fig.3)

7. Jack 3.5mm input for connecting your device

8. LED indicator

9. Reset button

Package contents:

1. Case (transmitter 2x, receiver)
2. USB-C charging cable
3. Wind protector
4. Instructions for use (EN)

Transmitter control

ON| The transmitter automatically switches on when the case is opened.| The indicator light will turn green and after a while it will flash green and search for a receiver to pair.
---|---|---

OFF

| The transmitter will automatically turn off when inserted into the case and the case is closed, or if no receiver is paired for ten minutes.|

The light does not illuminate when switched off.

Charging| Insert the transmitter into the housing. Charging will turn on automatically.|

When charging, the light does not illuminate.

Pairing

| Pairing starts automatically when removed from the case.| The indicator light flashes green while pairing or searching for a pairing receiver. After pairing with a receiver, the light stays green throughout the connection.
Battery capacity alarm| Battery level is below 20%.| The LED flashes blue.

**Reset***

| Press the reset button once long (3s) to reset the device. To cancel pairing, press the reset button with two quick presses (2x/1s)| When resetting, the LED starts flashing green. The transmitter then reconnects to the receiver and the LED turns green.

Receiver control

ON| The receiver automatically switches on when connected to your device.| The indicator light will turn green and after a moment it will flash green looking for the transmitter to pair.
---|---|---
OFF| The receiver automatically switches off when disconnected from your device.| The light does not illuminate when switched off.
Charging| The receiver takes the necessary power from your connected device.| —-

Pairing

| Pairing starts automatically when you plug in the receiver and turn on the transmitter.| The indicator light flashes green while pairing or searching for a transmitter to pair. After pairing with a transmitter, the light stays green for the entire connection.

**Reset***

| To reset the device, press the reset button once long (3s). To cancel pairing, press the reset button with two quick presses (2x/1s).| ****

—-

Controlling the case

Charging the case| The LED flashes red when charging. When the case is fully charged, the LED goes off.
---|---
Charging transmitters| When one transmitter is charging in the housing, the LED indicator flashes green. If two microphones are charging, the LED flashes alternately green and blue If the microphones are charged, the LED goes off.
**Battery status indication**| Green: 100-75%
Blue: 74-36%
Red: 35-0%

• When resting, a restart must be performed on both devices (receiver and transmitter 2x)
  NOTE: If the receiver is connected to your device, no audio recording (recordings made with the microphone, audio recording) files of all formats, YouTube, Spotify, etc.) and phone calls cannot be played. To play audio recordings or make telephone calls disconnect the receiver from your device.
  Warning:

  1. Do not disassemble the device and its accessories.
  2. Do not modify, disassemble, open, puncture, or otherwise tamper with the device.
  3. Protect from fire and prolonged direct sunlight to prevent overheating and damage.
  4. Avoid any contact of the device with water!
  5. Do not use the device in a dusty environment.
  6. This appliance is not intended for use by persons (including children) with physical, sensory, or mental disabilities or lack of experience and knowledge that prevents the safe use of the device.
  7. Do not use chemical cleaners, etc.

Stop using this device immediately if the device is damaged in any way. Keep out of reach of children! Small parts of the device can be inhaled or swallowed by children. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.

Do not dispose of the product at the end of its useful life as unsorted municipal waste, use separate waste collection points. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling this product, please contact your local city office, your household waste disposal service, or the shop where you purchased the product.

https://www.best-power.cz/bezdratove-mikrofony
Product information
The VIKING brand is distributed by the company: BONA SPES s.r.o.
Řepčín 250, Olomouc 77900, IČO: 03476774, DIČ: CZ03476774,
tel: +420 777 109 009, www.best-power.cz,
email: info@best-power.cz

References

• Design a výroba kiosků - POWER electrical services, s.r.o.
• Power banky, Externí a záložní baterie | Best-PowerBank.cz

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>