moonki sound MH-O710BT Bluetooth High Definition On Ear Foldable Headphones User Manual
- June 9, 2024
- moonki sound
Table of Contents
MH-O710BT
Bluetooth High Definition On Ear Foldable Headphones
Using Manual
Dear Costumer:
Congratulations on the purchasing of your Moonki Sound speaker!
You are now the owner of a high quality speaker, made with superior
performance parts, and designed with a profesional sound base.
This product count with a period of 6 month of warranty, during witch any
malfunction from factory will be solve by the autorize personal. Depending on
the defect, the unit might be change for a new one, repaired or make a credit
note (all this will depend on the defect and the disposition for spare parts),
as well of the time of response will variate.
This warranty do not cover any damage derive from incorrect connections, wrong
handling of the unit or damage for mechanical forces on the unit or any of it
accesories.
In case of technical support, please contact to
rma@moonki.com There you will receive all the prosses
information to tramit the warranty.
Recharge
- On the right earcup,carefully plug the USB cable into USB charging port and connect the other end of the cable to either a computer USB port or to a USB-compatible car or wall charger.
- Solid red LED light will appear to indicate when the headphone is charging.
- When charging is complete, the LED light will turn Blue.
- Charging time is approximately 1.5 hours.
Turn It On/Off
- Press & hold the power button on the right side of the headphone for about 3 seconds until the LED indicator light turns on.
- Press & hold the power button again for 3 seconds until the LED light turns off.
Pair & Connect With New Device
- Power on the wireless bluetooth headphone(refer to the “Turn It On”section).
- To pair the headphone with a new device,the red & blue LED light blink to indicate it is ready to be paired with you device.
- On your Bluetooth-enabled smartphone,tablet or media player,navigate to the
- Bluetooth settings menu,turn on the Bluetooth feature,and search for new devices After a few seconds you will see “MH-O710BT”listed.
- Tap this model to select it.Solid blue LED light indicate your device has successfully paired.
- With your previously paired device’s Bluetooth turned on and in range,The headphone will automatically reconnect to the last Bluettooth device it was connected to.
NOTE:If the headphone is not used within 5 minutes,the headphones will automatically turn off to save battery.
Play
- Connect your device to the headphone via Bluetooth(refer to the”Pair & Connect”section)
- Open your favorite music app and press play.
- Control the music,track & volume from your device,or control the music & volume.Press the
- Power button once to play/pause music & answer calls,press it twice to redial the last number called on your phone,and press & hold it to reject an incoming call.
- All audio,including music,games,videos,and notifications will be routed through the headphone.
Button Function
- Press+Hold button (refer to product Diagram) to turn up the volume
- Press-Hold button (refer to product Diagram) to turn down the volume.
- Press + button (refer to product Diagram) to nex track.
- Press – button (refer to product Diagram) to previous track.
- Press button (refer to product Diagram) to Voice Assistant.
Toroubleshooting
Without Charge| Recharge your wireless bluetooth headphone using the USB
cable.
---|---
Music is not playing over Bluetooth| Make sure your Bluetooth device has A2DP
profile.
Check if both devices are paired and connected over Bluetooth.Restart the
headphone to reconnect your Bluetooth device.
Bluetooth device will not reconnect with the headphone| Navigate to your
Bluetooth settings menu on your Bluetooth device,tap “MH-O710BT”,and select
“Forget”. Now follow the steps to pair your device again.Or, press & hold the
power button on the headphone (while powered on) to disconnect the headphones
from any connected devices. Then follow the steps to reconnect your device.
