moonki sound MS-P15BW Professional Audio User Manual
- June 4, 2024
- moonki sound
Table of Contents
moonki sound MS-P15BW Professional Audio User Manual
1. Packing Contents
1 Speaker
1 Remote Control
1 User’s Manual
1 Power Cable
2 X UHF Wireless microphone
2. Specifications
15″ 2-way active speaker
PMPO Power: 4000W
RMS Power: 300W
Woofer: 15″ diameter with LED lighting, with 2.4″ ( 60mm) KSV voice coil.
Tweeter: Diameter 1″ (25 mm)
Frequency response: 50HZ-18KHZ
Sensitivity: 98dB( +/-3dB)
Connectivity: Bluetooth, Canon Line In, XLR Line Out
Unit Measurements: 35 x 41.5 x 69cm
Unit Weight: 20kgs
Box Measurements: 48.5 X 40 X 74.5CM
Box Weight: 23 kg
3. Panel Specification
Play/Pause: Press to play a song or pause while playing a song.
Previous: Press once to jump previous song/Press and hold to back forward.
Next: Press once to jump to next song/Press and hold to fast forward.
Mode: Select an operating modality.
Connection Bluetooth
- To pair the speaker with a bluetooth phone or audio device, press “MODE” repeatedly on the MP3 player until select this mode.
- Put your phone or device to be used in bluetooth device discovery mode.
- When your phone or device shows the “BLUETOOTH” device, confirm the link.
TWS: Using Bluetooth TWS (True wired stereo):
The speaker includes TWS function via Bluetooth.
In case you have two units of the same model at hand, switch to bluetooth
mode. When playing for the first time, you must choose one of the speakers as
the master. Then press and hold (5
seconds) the play/pause button on the control panel to connect with another
speaker. You will hear indicator sound on “right channel” coming out from main
speaker and sound on “left
channel” from other speaker after successful pairing. Then you can start
Bluetooth operation as usual. Sound will be output from both speakers. When
you turn off or change the play
mode and back to Bluetooth mode, the two speakers can automatically pair to
play in TWS mode. In TWS pairing for the first time, there may be a short “sa
sa sa … ” sound from the speaker which is not a malfunction. If you turn off
the main speaker, TWS playback will stop.
4. Wireless Microphone
- Grille
- Power on/off/ mute function
- Battery Cover. Access to the battery
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation
This device should be installed and operated with a minimum distance of 20cm
between the antenna and all persons.
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This device generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or
television reception, which can be determined by turning the device off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the device and receiver.
–Connect the device into an outlet on a circuit different from that to which
the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment