ITECH IT-M3140 Programmable DC Power Supply Owner’s Manual

October 30, 2023
iTech

ITECH IT-M3140 Programmable DC Power Supply

Programmable DC Power Supply

INTRODUCTION

IT-M3140 Programmable DC Power Supply is specially designed for testing, production, R&D lab and ATE integration. It is only 2U half rack, but can output power up to 1850W and 3000W, and voltage output from 30V to 1200V. It has three output modes of constant voltage, constant current and constant power. Automatic wide-range output enables it to achieve a wider output voltage and current range at full power output, meeting a wider range of testing requirements and greatly saving equipment purchase costs.
Not only that, IT-M3140 is a DC power supply integrating high stability, fast response (<1ms), high-level protection functions and LIST programmable functions. This series is equipped with a standard USB/LAN interface, and can be used with ITECH’s free PV3140 software to easily realize remote control and data storage, and is easy to integrate. IT-M3140 can be widely used in semiconductor device ATE, burn-in integration, testing and certification, power module and automotive electronics and other fields.

FEATURE

  • Only 2U half rack, 1850W/3000W
  • 30V-1200V, 150A
  • Three output modes: CV/CC/CP
  • CC/CV priority to avoid current overshoot
  • Fast dynamic response: <1ms
  • According to the voltage and current waveform output
  • programmed by LIST, the rising and falling slopes are adjustable
  • Fold back, UVP/OVP, UCP/OCP,OPP,OTP, inhibit protection, more secure and reliable
  • The Sense protection circuit combined with software and
  • hardware can effectively detect Sense reverse connection and missing connection, and protect the DUT
  • Standard USB/LAN, optional RS232 & analog, GPIB, easy to integrate.

APPLICATION

Model| Parameter Specifications (3000W)| Model| Parameter Specifications (1850W)
---|---|---|---
IT-M3141| 30V/150A/3000W| IT-M3131E| 30V/150A/1850W
IT-M3142| 80V/80A/3000W| IT-M3132E| 80V/80A/1850W
IT-M3143| 150V/40A/3000W| IT-M3133E| 150V/40A/1850W
IT-M3144| 300V/20A/3000W| IT-M3134E| 300V/20A/1850W
IT-M3145| 600V/10A/3000W| IT-M3135E| 600V/10A/1850W
IT-M3146| 1000V/6A/3000W| IT-M3136E| 1000V/6A/1850W
IT-M3147| 1200V/5A/3000W| IT-M3137E| 1200V/5A/1850W

Size: 2U half rack
AC input range (single-phase: L, N, PE) : A. 110Vac±10%, power down to 1500W B. 192Vac~264Vac, full power output of all models

Optional accessories

Description                                          Model

Rack mounting kit| IT-E158A| For 2 units installed side by side in ITECH standard cabinet
IT-E158B| For 2 units installed side by side in non-ITECH cabinet
IT-E158C| For single unit installed in ITECH standard cabinet
IT-E158D| For single unit installed in non-ITECH cabinet
Communication interfaces| IT-E176| GPIB communication card
IT-E177| RS232 & Analog card

LIST mode simulates various power supply disturbance waveforms

IT-M3140 series provides LIST programming mode. In this mode, users can generate arbitrary DC voltage disturbance waveforms, such as instantaneous voltage drop or voltage rise slowly, by setting parameters such as working steps (max100 steps), output voltage/current per step, single step duration (0 .001s-3600s), rising and falling slopes, etc., to fully verify the anti- interference performance of DC loads. It is suitable for testing products such as DC-DC power modules, motor drivers, and battery-powered household appliances.

CC/CV priority function to effectively suppress current overshoot

The IT-M3140 series has a CC/CV priority function to help users solve a variety of demanding problems in long-term test applications. By changing the CC/CV priority and loop speed settings, users can obtain voltage high speed mode or current no overshoot mode, making the test more flexible, since it is suitable for current-sensitive laser testing, and can also meet the application scenario of rapid voltage dips

Fast dynamic response < 1ms

IT-M3140 series has high speed dynamic response characteristics, when the external load fluctuations, the power supply can quickly restore stability within <1ms, thus makes the test more reliable.

9 protection modes to enhance test security

To further enhance the reliability and safety of product testing, the IT-M3140 series offers nine protection modes. In the traditional over / under voltage, over / under current, over power protection on the basis of the additional Fold back, Inhibit and Sense reverse connection protection function, so that not only can effectively reduce the power mode switching instantaneous overshoot, while avoiding the sense wrong connection or leakage caused by test abnormalities. With the Inhibit output ban / interlock function, making the test more secure and  reliable.

Specification

IT-M3141 IT-M3131E         IT-M3142 IT-M3132E
Rated Output Value Voltage 0~30V
Current 0~150A 0~80A
Power 0~3000W 0~1850W

Power Regulation

(%of Output + Offset)

| Voltage| ≤0.005%+2mV| 0.001%+5mV
Current| ≤50mA| ≤30mA
Power Regulation

(%of Output + Offset)

| Voltage| ≤0.005%+2mV| 0.004%+5mV
Current| ≤70mA| ≤40mA
Setup Resolution| Voltage| 1mV| 10mV
Current| 10mA| 10mA
Power| 0.1W| 0.1W
Readback Resolution| Voltage| 1mV| 10mV
Current| 10mA| 10mA
Setting Accuracy| Voltage| ≤0.03% + 0.02%F.S.| ≤0.03% + 0.02%F.S.
Current| ≤0.1% + 0.1%F.S.| ≤0.1% + 0.1%F.S.
Power| ≤0.5%F.S.| ≤0.5%F.S.
Readback Accuracy| Voltage| ≤0.03% + 0.02%F.S.| ≤0.03% + 0.02%F.S.
Current| ≤0.1% + 0.1%F.S.| ≤0.1% + 0.1%F.S.
Power| ≤0.5%F.S.| ≤0.5%F.S.
Ripple (20hz-20Mhz)| Voltage| typical value≤70mV(MAX: ≤70mV)| typical value≤100 mV(MAX: ≤100mV)
Current| typical value≤150mA(MAX: ≤150mA)| typical value≤80mA(MAX: ≤80mA)
Setting Temperature Coefficient (%of Output + Offset)/℃| Current| ≤20PPM/℃| ≤20PPM/℃
Voltage| ≤50PPM/℃| ≤50PPM/℃
Readback Temperature Coefficient (%of Output + Offset)/℃| Current| ≤20PPM/℃| ≤20PPM/℃
Voltage| ≤50PPM/℃| ≤50PPM/℃
Time(mS)| Voltage| ≤60mS| ≤60mS
Time(mS)| Voltage| ≤150mS| ≤150mS
Time(mS)| Voltage| ≤2S| ≤2S
Time(mS)| Voltage| ≤200mS| ≤200mS
Dynamic Mode| Voltage| ≤1mS| ≤1mS
AC Input| Voltage| 220V±20%(3000W)
110V±10%(derating to 1500W)| 220V±20%(1850W)
110V±10%(derating to 1500W)| 220V±20%(3000W)
110V±10%(derating to 1500W)| 220V±20%(1850W)
110V±10%(derating to 1500W)
Frequency| 47-63Hz| 47-63Hz
Setup Stability-30min
(%of Output  + Offset)| Voltage| 0.01%+1mV| 0.01%+8mV
Current| 0.03%+50mA| 0.04%+20mA
Setup Stability-8h
(%of Output  + Offset)| Voltage| 0.01%+2mV| 0.01%+10mV
Current| 0.03%+55mA| 0.04%+25mA
Readback Stability-30min (%of Output  + Offset)| Voltage| 0.01%+1mV| 0.01%+8mV
Current| 0.03%+50mA| 0.04%+20mA
Readback Stability-8h
(%of Output  + Offset)| Voltage| 0.01%+2mV| 0.01%+10mV
Current| 0.03%+55mA| 0.04%+25mA
Efficient| 90%| 91%
Remote Sense Compensation Voltage| ≤3V| ≤3V
Command Response Time| 5ms| 5ms
Power Factor| 0.99| 0.99
Maximum Input Current| 20A| 18A| 20A| 18A
Maximum Input Apparent Power| 3700kVA| 2300kVA| 3700kVA| 2300kVA
Isolation(output to ground)| 600VDC| 600VDC
Isolation(input to ground)| 2200VDC| 2200VDC
Dimension(mm)| 255W530D109H| 255W530D109H
Net. Weight| (8±1)kg| (8±1)kg
IT-M3143| IT-M3133E           IT-M3144| IT-M3134E
---|---|---
Rated Output Value| Voltage| 0~150V| 0~300V
Current| 0~40A| 0~20A
Power| 0~3000W| 0~1850W| 0~3000W| 0~1850W
Power Regulation

(%of Output + Offset)

| Voltage| 0.001%+6mV| 0.001%+10mV
Current| ≤20mA| ≤8mA
Power Regulation
(%of Output + Offset)| Voltage| 0.004%+8mV| 0.004%+20mV
Current| ≤35mA| ≤10mA
Setup Resolution| Voltage| 10mV| 10mV
Current| 10mA| 1mA
Power| 0.1W| 0.1W
Readback Resolution| Voltage| 10mV| 10mV
Current| 10mA| 1mA
Setting Accuracy| Voltage| ≤0.03% + 0.02%F.S.| ≤0.03% + 0.02%F.S.
Current| ≤0.1% + 0.1%F.S.| ≤0.1% + 0.1%F.S.
Power| ≤0.5%F.S.| ≤0.5%F.S.
Readback Accuracy| Voltage| ≤0.03% + 0.02%F.S.| ≤0.03% + 0.02%F.S.
Current| ≤0.1% + 0.1%F.S.| ≤0.1% + 0.1%F.S.
Power| ≤0.5%F.S.| ≤0.5%F.S.
Ripple(20hz-20Mhz)| Voltage| typical value≤150 mV(MAX: ≤150mV)| typical value≤300 mV(MAX: ≤300mV)
Current| typical value≤40mA(MAX: ≤40mA)| typical value≤20mA(MAX: ≤20mA)
Setting Temperature Coefficient (%of Output + Offset)/℃| Current| ≤20PPM/℃| ≤20PPM/℃
Voltage| ≤50PPM/℃| ≤50PPM/℃
Readback Temperature Coefficient (%of Output + Offset)/℃| Current| ≤20PPM/℃| ≤20PPM/℃
Voltage| ≤50PPM/℃| ≤50PPM/℃
Time(mS)| Voltage| ≤60mS| ≤60mS
Time(mS)| Voltage| ≤150mS| ≤150mS
Time(mS)| Voltage| ≤4S| ≤5S
Time(mS)| Voltage| ≤200mS| ≤200mS
Dynamic Mode| Voltage| ≤1mS| ≤1mS
AC Input| Voltage| 220V±20%(3000W)

110V±10%(derating to 1500W)

| 220V±20%(1850W)
110V±10%(derating to 1500W)| 220V±20%(3000W)

110V±10%(derating to 1500W)

| 220V±20%(1850W)
110V±10%(derating to 1500W)
Frequency| 47-63Hz| 50/60Hz
Setup Stability-30min
(%of Output +Offset)| Voltage| 0.01%+16mV| 0.01%+60mV
Current| 0.04%+10mA| 0.04%+5mA
Setup Stability-8h
(%of Output +Offset)| Voltage| 0.01%+20mV| 0.01%+75mV
Current| 0.04%+12mA| 0.04%+6mA
Readback Stability-30min (%of Output +Offset)| Voltage| 0.01%+16mV| 0.01%+60mV
Current| 0.04%+10mA| 0.04%+5mA
Readback Stability-8h
(%of Output +Offset)| Voltage| 0.01%+20mV| 0.01%+75mV
Current| 0.04%+12mA| 0.04%+6mA
Efficiency| 91%| 91%
Remote Sense Compensation Voltage| ≤3V| ≤3V
Command Response Time| 5ms| 5ms
Power Factor| 0.99| 0.99
Maximum Input Current| 20A| 18A| 20A| 18A
Maximum Input Apparent Power| 3700kVA| 2300kVA| 3700kVA| 2300kVA
Isolation(output to ground)| 600VDC| 600VDC
Isolation(input to ground)| 2200VDC| 2200VDC
Dimension(mm)| 255W530D109H| 255W530D109H
Net. Weight| (8±1)kg| (8±1)kg
IT-M3145| IT-M3135E     ITM3146| IT-M3136E ITM3147| IT- M3137E
---|---|---|---
Rated
Output Value| Voltage| 0~600V| 0~1000V| 0~1200V
Current| 0~10A| 0~6A| 0~5A
Power| 0~3000W| 0~1850W| 0~3000W| 0~1850W| 0~3000W| 0~1850W
Power Regulation
(%of Output Offset)| Voltage| 0.001%+20mV| 0.002%+20mV| 0.002%+20mV
Current| ≤4mA| ≤2mA| ≤2mA
Power Regulation
(%of Output + Offset)| Voltage| 0.004%+30mV| 0.005%+50mV| 0.005%+50mV
Current| ≤7mA| ≤4mA| ≤4mA
Setup Resolution| Voltage| 10mV| 0.1V| 0.1V
Current| 1mA| 1mA| 1mA
Power| 0.1W| 0.1W| 0.1W
Readback Resolution| Voltage| 10mV| 0.1V| 0.1V
Current| 1mA| 1mA| 1mA
Setting Accuracy| Voltage| ≤0.03% + 0.02%F.S.| ≤0.03% + 0.02%F.S.| ≤0.03% + 0.02%F.S.
Current| ≤0.1% + 0.1%F.S.| ≤0.1% + 0.1%F.S.| ≤0.1% + 0.1%F.S.
Power| ≤0.5%F.S.| ≤0.5%F.S.| ≤0.5%F.S.
Readback Accuracy| Voltage| ≤0.03% + 0.02%F.S.| ≤0.03% + 0.02%F.S.| ≤0.03% + 0.02%F.S.
Current| ≤0.1% + 0.1%F.S.| ≤0.1% + 0.1%F.S.| ≤0.1% + 0.1%F.S.
Power| ≤0.5%F.S.| ≤0.5%F.S.| ≤0.5%F.S.
Ripple(20hz-20Mhz)| Voltage| typical value≤600 mV(MAX: ≤600mV)| typical value≤1V(MAX: ≤1V)| typical value≤1V(MAX: ≤1V)
Current| typical value≤10mA(MAX: ≤10mA)| typical value≤6mA(MAX: ≤6mA)| typical value≤6mA(MAX: ≤6mA)
Setting Temperature Coefficient (%of Output + Offset)/℃| Current| ≤20PPM/℃| ≤20PPM/℃| ≤20PPM/℃
Voltage| ≤50PPM/℃| ≤50PPM/℃| ≤50PPM/℃
Readback Temperature Coefficient (%of Output + Offset)/℃| Current| ≤20PPM/℃| ≤20PPM/℃| ≤20PPM/℃
Voltage| ≤50PPM/℃| ≤50PPM/℃| ≤50PPM/℃
Time(mS)| Voltage| ≤60mS| ≤60mS| ≤60mS
Time(mS)| Voltage| ≤150mS| ≤150mS| ≤150mS
Time(mS)| Voltage| ≤5S| ≤5S| ≤5S
Time(mS)| Voltage| ≤200mS| ≤200mS| ≤200mS
Dynamic Mode| Voltage| ≤1mS| ≤1mS| ≤1mS
AC Input| Voltage| 220V±20%(3000W)
110V±10%(derating to 1500W)| 220V±20%(1850W)
110V±10%(derating to 1500W)| 220V±20%(3000W)
110V±10%(derating to 1500W)| 220V±20%(1850W)
110V±10%(derating to 1500W)| 220V±20%(3000W)
110V±10%(derating to 1500W)| 220V±20%(1850W)
110V±10%(derating to 1500W)
Frequency| 47-63Hz| 50/60Hz| 50/60Hz
Setup Stability-30min
(%of Output +Offset)| Voltage| 0.01%+80mV| 0.01%+60mV| 0.01%+60mV
Current| 0.04%+2mA| 0.04%+2mA| 0.04%+1mA
Setup Stability-8h
(%of Output +Offset)| Voltage| 0.01%+100mV| 0.01%+100mV| 0.01%+100mV
Current| 0.04%+3mA| 0.04%+3mA| 0.04%+2mA
Readback Stability-30min
(%of Output +Offset)| Voltage| 0.01%+80mV| 0.01%+60mV| 0.01%+60mV
Current| 0.04%+2mA| 0.04%+2mA| 0.04%+1mA
Readback Stability-8h
(%of Output +Offset)| Voltage| 0.01%+100mV| 0.01%+100mV| 0.01%+100mV
Current| 0.04%+3mA| 0.04%+3mA| 0.04%+2mA
Efficiency| 91%| 91%| 91%
Remote Sense Compensation Voltage| ≤6V| ≤6V| ≤6V
Command Response Time| 5ms| 5ms| 5ms
Power Factor| 0.99| 0.99| 0.99
Maximum Input Current| 20A| 18A| 20A| 18A| 20A| 18A
Maximum Input Apparent Power| 3700kVA| 2300kVA| 3700kVA| 2300kVA| 3700kVA| 2300kVA
Isolation(output to ground)| 600VDC| 1000VDC| 1000VDC
Isolation(input to ground)| 2200VDC| 2200VDC| 2200VDC
Dimension(mm)| 255W530D109H| 255W530D109H| 255W530D109H
Net. Weight| (8±1)kg| (8±1)kg| (8±1)kg

Customer Service



This information is subject to change without notice. For more information, please contact
ITECH.

Taipei
Add: No.918, Zhongzheng Rd., Zhonghe Dist., New Taipei City
235, Taiwan
Web: www.itechate.com
TEL: +886-3-6684333
E-mail: info@itechate.com
Factory I
Add: No.108, XiShanqiao Nanlu, Nanjing city, 210039, China
TEL: +86-25-52415098
Web: www.itechate.com
Factory II
Add: No.150, Yaonanlu, Meishan Cun, Nanjing city, 210039, China
TEL: +86-25-52415099
Web: www.itechate.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals