ZEPHYR PRKB24C01AG Outdoor Kegerator and Beverage Cooler User Guide
- October 30, 2023
- ZEPHYR
Table of Contents
ZEPHYR PRKB24C01AG Outdoor Kegerator and Beverage Cooler
Product Information
The PRKRAIL-0124SS Presrv Kegerator Drink Guardrail is an accessory designed for use with Zephyr models PRKB24C01AG and PRKB24C01AS-OD. It is a guardrail that is installed on top of the kegerator to prevent drinks from falling off.
Product Usage Instructions
- Using the 3mm Allen wrench included with the kegerator, remove (4) M5*10 screws from the top of the kegerator.
- Install (4) threaded posts from the Drink Guardrail hardware package into the screw holes on top of the kegerator.
- Assemble the two Drink Guardrail sections together and place over the (4) threaded posts.
- Secure the Drink Guardrail in place with (4) 9*22-M5 screws included in the hardware package and tighten them using the Philip Screwdriver.
Note: Make sure to tighten the screws securely to ensure that the guardrail is stable and can effectively prevent drinks from falling off.
USING INSTRUCTION
-
Using the 3mm Allen wrench included with the kegerator, remove (4) M5*10 screws from the top of the kegerator.
-
Install (4) threaded posts from the Drink Guardrail hardware package into the screw holes on top of the kegerator.
-
Assemble the two Drink Guardrail sections together and place over the (4) threaded posts.
-
Secure the Drink Guardrail in place with (4) φ9*22-M5 screws included in the hardware package and tighten them using the Philip Screwdriver.
For use with Zephyr models PRKB24C01AG and PRKB24C01AS-OD
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>