DOOA 153-009 Magnet Light Stand User Manual
- October 30, 2023
- DOOA
Table of Contents
DOOA 153-009 Magnet Light Stand
Safety Instructions
* _Please read carefully._**
- Make sure to install Magnet Light Stand MARU on a stable surface. Do not install this product on unstable places.
- Install this product as shown in the Installation Example. Place a Glass Pot MARU on the product, then put the power supply cord of Magnet Light G through the hole located on the back of the product and install the light. (Glass Pot MARU and Magnet Light G are sold separately.)
Magnet Light Stand MARU Compatible Glass Pot MARU Size
- Magnet Light Stand MARU 95: Glass Pot MARU 95 95xH146
- Magnet Light Stand MARU 130: Glass Pot MARU 130 Ø130xH200
IMPORTANT
- This product cannot be installed in the following places.
- Places often having vibration.
- Places in direct sunlight, or having extremely high or low level of humidity, or outdoors.
- Places with extreme temperature changes, such as near air conditioner or heater.
- Near home appliances (There is a risk of electric shock if the water from Glass Pot MARU on the product splashes on home appliances.)
- When Magnet Light Stand MARU is wet with water, wipe it off immediately with a dry towel. Use of the product while it is wet may cause rusting. In addition, when wiping off dirt, do not use any detergent to avoid the paint from coming off, but gently wipe it off with a dry cloth or a damp soft cloth after wringing it out.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>