GARDENA 5600 SilentComfort 9067 Pressure Tank Unit Instruction Manual

: June 17, 2024
: Gardena

Table of Contents

GARDENA 5600 SilentComfort 9067 Pressure Tank Unit
Product Information
Product Usage Instructions
- Safety Instructions
Assembly
Initial Setup
- Starting and Stopping the Pump Unit
Contact Information
FAQ (Frequently Asked Questions)
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

GARDENA 5600 SilentComfort 9067 Pressure Tank Unit

GARDENA-5600-SilentComfort-9067-Pressure-Tank-Unit

Product Information

Specifications

Model: 5600 SilentComfort Art. 9067
Pressure Tank Unit
Manufacturer: GARDENA Manufacturing GmbH
Year of Manufacture: 2014
Compliance: 2014/53/E
Support and Safety Regulations: http://www.gardena.com/int/support/safety-regulations

Product Usage Instructions

Safety Instructions

General Safety Instructions
DANGER: Do not pump salt water, dirty water, corrosive substances, highly flammable or explosive substances (such as gasoline, paraffin, nitrocellulose thinners), oils, fuel oil, or food.

Extension Cord
Length of Cord: Up to 20m or 20-50m

Additional Safety Instructions

DANGER: Do not use the product with sharp edges. Do not transport the product by the cord or pull the cord to unplug it. Follow the maintenance instructions. When using the product with a generator, follow the warnings of the generator manufacturer.

Assembly

Attaching the Product to a Surface

Screw the product to a solid surface using four hexagonal head screws (not provided).
If using different connections, use sealing tape on the male thread of the connections. Incorrect sealing can cause leaks/air entry.
Use the provided sealing system for this purpose.

Connecting the Product to Other Devices
Use the appropriate connectors for pumps, faucets, and hoses provided by GARDENA:

Set of connectors for GARDENA pumps – Ref. 1750
GARDENA faucet adapter – Ref. 18222
GARDENA hose connector – Ref. 18216
Set of connectors for GARDENA pumps – Ref. 1752

Initial Setup

Language Selection
Use the navigation buttons to select a language.

Using the Product
Begin using the product once the initial setup is complete.

Starting and Stopping the Pump Unit

Initial Startup

Ensure the product is connected to a power source.
Follow the specific instructions provided for starting and stopping the pump unit. Refer to Figures O1 and O2 for visual guidance.

Contact Information

For further assistance or inquiries, please visit www.gardena.com or refer to the local contact information provided in the manual.

Additional Resources

For safety and regulations, please check GARDENA Safety and Regulations.

Please note that the HTML code provided above is a partial transcription and interpretation of the information available in the images. There may be additional content, diagrams, instructions, and safety warnings in the full manual which are not covered here. For complete information, the full manual should be consulted, and the local regulations and safety instructions should be followed when operating the equipment.