MAXIM 28278 AKIMBO 12 Light Pendant W Led Bulbs Instruction Manual
- May 21, 2024
- MAXIM
Table of Contents
MAXIM 28278 AKIMBO 12 Light Pendant W Led Bulbs
Product Information
Item/Model Number: 28278 AKIMBO 12-LIGHT PENDANT W LED BULBS
- Lamping | Ampoule: [12] x [E26 Medium] [9W] (Included)
- General: 120V, 16758&7, 216
- Manufactured in China
Product Usage Instructions
Before getting started, please ensure that the package contains all the components listed below:
- A
- B
- C
- D
- E x1
- F x1
- G x1
- H x1
- I x6
- J x6
- K x12
- L x12
-
8-32 x1.25
- BL9E26FT120V30 (Included) x12
- SHD28272WN x1
- GLS28272OP x2
- STR06206BK-NK (1PCS)
- STR06212BK-NK (3PCS)
Please consult a qualified electrician prior to installation.
To install the pendant, follow these steps:
- Run wire through stems and combine stem lengths to meet desired mounting height.
- Attach the B( Ring) to the stem.
- Install the I and J components onto the stem.
- Attach the K and L components to the I and J components.
- Install the E, F, and G components onto the K and L components.
- Attach the H component to the E, F, and G components.
- Install the BL9E26FT120V30 bulbs into the E component.
- Install the SHD28272WN shade onto the E component.
- Install the GLS28272OP glass onto the E component.
- Install the STR06206BK-NK (1PCS) and STR06212BK-NK (3PCS) onto the E component.
- Consult a qualified electrician to connect the wires and power on the pendant.
General Instructions
Before Getting Started
- Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain for future use.
- Keep all hardware parts and packaging out of reach or small children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all required contents for complete assembly.
- Take care when lifting. Assemble the product in close proximity to where you intend to install it.
- Do not over tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
- Risk of suffocation! Keep packaging materials away from children.
Lamp Care Instructions
- Carefully read through the instruction sheet before assembly and using the product.
- Caution there is a risk of shock! Disconnect from power source before assembling or cleaning.
- Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
- Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
- Check the product cord to be sure is free torn or frayed.
Cleaning & Maintenance
- On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges.
- For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
- Clean with soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.
- Periodically (every 90-180 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
PARTS
Before getting, started, ensure the package contains the following components:
- Run wire through stems and combine stem lengths to meet desired mounting height.
- ,34,
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>