Starfrit 0929680020000 Deli Slicer Instruction Manual

0929680020000 Deli Slicer
Instruction Manual

0929680020000 Deli Slicer

ASSEMBLY

WASH THE APPLIANCE BEFORE THE FIRST USE. PLEASE REFER TO THE CLEANING SECTION IN THIS BOOKLET.

1. Once all pieces are clean and dry, unfold the slicer’s body. Place the unit in front of you, the handle must be facing your right hand.

2. Install the handle. Push until it dicks.

3. To secure the unit, to activate the suction base.
   WARNING: place the unit on a clean, flat and non-textured surface.

4. Align the blade with the blade-locking screw hole. Insert the blade-locking screw and turn clockwise until! it clicks to secure the blade on the unit WARNING – SHARP BLADE: don’t put your hands on the serrated edge.
   

5. Unfold the sliding food carriage and the thumb guard. Under the food carriage, slide the locking mechanism into the thumb guard.
   

6. Put the food carriage on the body by sliding it on the body hinge first. The thumb guard must be facing your left hand.
   

7. Finaly, insert the food pusher into the thumb guard.

HOW TO USE

1. Assemble the Deli Slicer by carefuly following Assembly Directives.

2. Place the slicer on a clean, flat and non-textured surface and toggle the lever up to activate the suction base. Then toggle the lever down to secure the unit. Repeat this operation whenever needed, the product must always be stable while in use.

3. Place your food on the sliding food carriage. Make sure that your food is in direct contact with the thumb guard and the gauge Secure your food by placing the food pusher behind it.
   SLICE THICKNESS ADJUSMENT

4. Unlock the thickness-locking screw by turning counter-clockwise. Select a thickness by turning the adjustment knob. Once the thickness is selected, turn the thickness- locking screw clockwise to lock-in the thickness selection.
   Note: Deli Slicer cuts from deli thin to 1″ (2.5 cm), the measuring guide represents cutting increments.

5. The Deli Slicer is a double motion operated kitchen tool. Both hands need to make disctinct motions. One hand guides the food through the blade while the other hand activates the handle. a) Right Hand: Turn the handle clockwise and the blade will start spinning. The blade turn ratio is 2:1. Keep a steady pace while turning the handle to keep a smooth and straight cut. b) Left Hand: Slide the food carriage by holding the thumb guard and the food pusher together. Once again keep a steady pace to have straight cuts.
   A smooth combination of motions between both hands results in the straightest cuts.

**CLEANING

**

• Wash the appliance before the first use.
• Carefuly remove the blade by turning the blade-locking screw counterclockwise (1/4 turn). Hand wash in warm soapy water. WARNING sharp blade: don’t put your hands on the serrated edge
• All other parts are dishwasher safe but they must be disassembled first.

STORAGE

All pieces are nestable. First, insert the handle in its holder. Then clip the food carriage and food pusher under the body in their respective slots.

Patent pending.

WARNING SHARP BLADES Be careful when using and washing this item to avoid injury.
www.Starfrit.com
www.facebook.com/starfrit
SUBSCRIBE TO THE NEWSLETTER TO LEARN MORE ABOUT OUR PROMOTIONS!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>