Omnitron Systems miConverter 10/100 Media Converter User Manual
- June 13, 2024
- Omnitron Systems
Table of Contents
Omnitron Systems miConverter 10/100 Media Converter
GENERAL
This User Manual covers the following model numbers:
Fiber Type and Distance
|
Connector Types
|
Tx Lambda (nm)
|
Rx Lambda (nm)
---|---|---|---
ST| SC
MM/DF/5km| 1100-0-x| 1102-0-x| 1310| 1310
SM/DF/30km| 1101-1-x| 1103-1-x| 1310| 1310
SM/DF/60km| 1101-2-x| 1103-2-x| 1310| 1310
SM/DF/120km| –| 1103-3-x| 1550| 1550
MM/SF/5km| –| 1110-0-x| 1310| 1550
MM/SF/5km| –| 1111-0-x| 1550| 1310
SM/SF/20km| –| 1110-1-x| 1310| 1550
SM/SF/20km| –| 1111-1-x| 1550| 1310
SM/SF/40km| –| 1110-2-x| 1310| 1550
SM/SF/40km| –| 1111-2-x| 1550| 1310
SM/SF/60km| –| 1110-3-x| 1310| 1550
SM/SF/60km| –| 1111-3-x| 1550| 1310
POWERING OPTIONS
-1 | Barrel Connector and US Power Adapter,100 – 120VAC, 60Hz |
---|
-2
| Barrel Connector and Universal Power Adapter, 100-240VAC, 50-60Hz (requires AC power cord)
-3
| Barrel Connector and European Power Adapter, 100-240VAC, 50-60Hz
-4
| Barrel Connector and UK Power Adapter, 100-240VAC, 50-60Hz
-5
| Barrel Connector and Australian Power Adapter, 100-240VAC, 50-60Hz
-6| USB Power Adapter Cable
-8
| Barrel Connector and US/Japan Power Adapter, 100-240VAC, 50-60Hz
DESCRIPTION
The miniature miConverter™ 10/100 is a rate-switching 10/100 RJ-45 copper to
100BASE-X fiber media converter that provides cost-effective fiber extension
and connectivity.
The 100BASE-X fiber port operates in Full-Duplex mode and supports single-mode
or multimode fiber with ST or SC fiber connectors. Single-fiber models feature
Bi-Directional fiber and support distances of up to 60km. The various fiber
model options are described in the table on the first page.
The RJ-45 port can auto-negotiate by detecting the speed and duplex-mode of the connected device. Upon connection to the UTP device, the RJ-45 port speed adjusts to either 10Mbps or 100Mbps, and the duplex-mode adjusts to either Full-Duplex or Half-Duplex.
WARNING!
Before inserting the Power Adapter, verify that the power on the unit is
appropriate for your AC line voltage source.
POWERING MODES
AC power adapter is available in US, Universal and Country/Region specific
models. Country/Region specific models feature optional interchangeable
connectors, allowing for compatibility with electrical outlet types found
around the world.
This product should only be used with Omnitron Supplied Power Unit.
To power the module using the USB cable, connect the USB Standard Type A connector to a USB port on the computer. Then connect the connector at the other end of the cable (barrel connector) to the connector on the back of the miConverter. Confirm that the module has powered up properly by checking the power status LED located on the top of the module.
To power the module using the AC/DC adapter, connect the AC/DC adapter to the AC outlet. Then connect the barrel connector at the end of the cable to the back of the miConverter. Confirm that the module has powered up properly by checking the power status LED located on the top of the module.
INSTALLATION PROCEDURE
The miConverter 10/100 can be quick-mounted using the included Velcro® strips,
or permanently mounted using the optional wall-mounting kit (P/N 4381).
Attach the RJ-45 port of the miConverter 10/100 to a 10BASE-T or 100BASE-TX
PoE capable Ethernet device, via a category 5 or better cable.
Attach the fiber port of the miConverter 10/100 to a 100BASE-X Fast Ethernet
device, via a fiber cable of appropriate mode and type.
When connecting the dual-fiber models, the miConverter transmitter (Tx) must
attach to the receiver side of its link partner; the receiver (Rx) must attach
to the transmitter.
When using single-fiber (SF) media converter models, the Tx wavelength on one
end has to match the Rx wavelength on the other. Based on this guideline, the
SF media converter models must be used in pairs, such as the 1110-1 matched
with the 1111-1.
LED INDICATORS
LED | Color | Description |
---|---|---|
Power “Pwr” | Amber | Off: No Power |
On: Power applied
Fiber Link “F/O”| Green| Off: No fiber link
On: Fiber link Blinking: Data activity
RJ-45 Link “UTP”| Green| Off: No RJ-45 link On: RJ-45 link Blinking: Data
activity
RJ-45 Speed “100”| Green| Off: Linked at 10M when UTP LED is ON On: Linked at
100M when UTP LED is ON
RJ-45 Duplex “FDX”| Green| Off: Half-Duplex On: Full-Duplex
SPECIFICATIONS
Standard Compliances| ****
IEEE 802.3
---|---
Regulatory Compliances
| Safety: EMI: ACT:| UL, CE, UKCA
FCC Class A TAA, BAA, NDAA
Environmental| RoHS, REACH, WEEE
Frame Size| Up to 1,536 bytes
Port Types
| Copper: Fiber:| 10/100BASE-T (RJ-45)
100BASE-X (ST, SC)
Cable Types
| Copper: Fiber:| EIA/TIA 568A/B, Cat 5 UTP and higher
Multimode: 50/125µm, 62.5/125µm Single-mode: 9/125µm
AC Power Requirements| AC Adapter:| 100 – 240VAC/50 – 60Hz
0.03A @ 120VAC (max)
DC Power Requirements
| DC Input: (AC Adapter)| 5.0 to 12.0VDC
0.5A @ 5VDC, 0.28A @ 9VDC
2.5mm Barrel Connector
Dimensions W x D X H| Standalone:| 1.71” x 4.10” x 0.84”
(43.4 mm x 104.1 mm x 21.3 mm)
---|---|---
Weight
| Module: With AC adapter:| 4 oz. (113.4 grams)
12 oz. (340.2 grams)
Temperature
| Commercial:
Wide:
| 0 to 50°C
-40 to 60°C
Humidity| 5 to 95% (non-condensing)
Altitude| -100m to 4,000m
MTBF (hrs)
| Module: With US AC Adapter:| 1,160,000
206,000
Warranty| Lifetime warranty with 24/7/365 free Technical Support
MECHANICAL
General and Copyright Notice
This publication is protected by U.S. and international copyright laws. All
rights reserved. The whole or any part of this publication may not be
reproduced, stored in a retrieval system, translated, transcribed, or
transmitted, in any form, or by any means, manual, electric, electronic,
electromagnetic, mechanical, chemical, optical or otherwise, without prior
explicit written permission of Omnitron Systems Technology, Inc.
The following trademarks are owned by Omnitron Systems Technology, Inc.: FlexPointTM, FlexSwitchTM, iConverter®, miConverterTM, NetOutlook®, OmniLight®, OmniConverter®, RuggedNet®, Omnitron Systems Technology, Inc.TM, OSTTM and the Omnitron logo.
All other company or product names may be trademarks of their respective
owners.
The information contained in this publication is subject to change without
notice. Omnitron Systems Technology, Inc. is not responsible for any
inadvertent errors.
Warranty
This product is warranted to the original purchaser (Buyer) against defects in
material and workmanship for a period of two (2) years from the date of
shipment. A lifetime warranty may be obtained by the original purchaser by
registering this product at www.omnitron-systems.com/support within ninety (90) days from the date of
shipment. During the warranty period, Omnitron will, at its option, repair or
replace a product which is proven to be defective with the same product or
with a product with at least the same functionality.
For warranty service, the product must be sent to an Omnitron designated
facility, at Buyer’s expense. Omnitron will pay the shipping charge to return
the product to Buyer’s designated US address using Omnitron’s standard
shipping method.
Limitation of Warranty
The foregoing warranty shall not apply to product malfunctions resulting from
improper or inadequate use and/or maintenance of the equipment by Buyer,
Buyer-supplied equipment, Buyer-supplied interfacing, unauthorized
modifications or tampering with equipment (including removal of equipment
cover by personnel not specifically authorized and certified by Omnitron), or
misuse, or operating outside the environmental specification of the product
(including but not limited to voltage, ambient temperature, radiation, unusual
dust, etc.), or improper site preparation or maintenance.
No other warranty is expressed or implied. Omnitron specifically disclaims the implied warranties of merchantability and fitness for any particular purpose. The remedies provided herein are the Buyer’s sole and exclusive remedies. Omnitron shall not be liable for any direct, indirect, special, incidental, or consequential damages, whether based on contract, tort, or any legal theory.
Environmental Notices
The equipment covered by this manual must be disposed of or recycled in
accordance with the Waste Electrical and Electronic Equipment Directive (WEEE
Directive) of the European Community directive 2012/19/EU on waste electrical
and electronic equipment (WEEE) which, together with the RoHS Directive
2015/863/EU, for electrical and electronic equipment sold in the EU after July
2019. Such disposal must follow national legislation for IT and
Telecommunication equipment in accordance with the WEEE directive: (a) Do not
dispose waste equipment with unsorted municipal and household waste. (b)
Collect equipment waste separately. (c) Return equipment using collection
method agreed with Omnitron.
The equipment is marked with the WEEE symbol shown to indicate that it must be collected separately from other types of waste. In case of small items the symbol may be printed only on the packaging or in the user manual. If you have questions regarding the correct disposal of equipment go to www.omniton- systems.com/support or e-mail to Omnitron at intlinfo@omnitron-systems.com
Technical Support
Phone: 949-250-6510
Fax: 949-250-6514
Address: Omnitron Systems Technology
38 Tesla
Irvine, CA 92618 USA
E-mail: support@omnitron-systems.com
URL: http://www.omnitron-systems.com