CRUZAA Sit-down E-Scooter with Built in Speakers and Bluetooth User Manual

June 13, 2024
CRUZAA

Move your own way
User Manual

CRUZAA Sit-down E-Scooter with Built in Speakers and
Bluetooth Cruzaa E-Scooter

Please read this manual before you operate your Cruzaa E-Scooter.

IMPORTANT
Please read the user manual in full. It contains important instructions about how to setup, maintain and start using the Cruzaa electric scooter safely.
Packaging Includes: Cruzaa electric scooter (1pc), charger (1pc), tool-kit (1pc), user manual (1pc).

Cruzaa E-Scooter Introduction

1.1 Features
Here at Cruzaa we are dedicated to providing you the best experience on the Cruzaa E-Scooter. With it’s streamlined design, industry-leading technology and premium manufacturing process, we’ve produced a high-quality Cruzaa E-Scooter.
Insisting on “detail matters”, each E-Scooter is equipped with features that deliver you a pleasant and comfortable riding experience.

Product Features:

  1. Smart USB charging interface.
  2. Water-proof stereo bluetooth speaker.
  3. High performance lithium battery.
  4. Speed control system.
  5. LED headlight.
  6. Equipped with front and rear smart brake-discs.
  7. Power-off safety brake system.
  8. Foldable.

Specifications

Item SPECIFICATION
Unfold size 1200mm615mm985mm
Fold size 1235mm536mm270mm
Weight 18kg
Loading weight 120kg
Max speed 25km/h
Endurance mileage 35-45km
Charging time 4-5 hrs
Battery capacity 8.7Ah
Battery type Lithium
Nominal voltage 36V
Rated power 240W
Motor type Brush-less gear motor
Motor rated torque 6.6N.M
Electricity consumption for one charging round 0.3 Degree
Over-current protection 13A ‡ 1A
Controller Under-voltage protection 30 ‡ 1V
Controller power tube number 6tubes

Product Operation

2.1 Smart Digital LCD Display

CRUZAA Sit-down E-Scooter with Built in Speakers and Bluetooth -
Display 2.2 Features

CRUZAA Sit-down E-Scooter with Built in Speakers and Bluetooth -
portable

  1. Foldable handle bar innovative foldable design, saving space.
  2. LED headlight: increase brightness for safer riding.
  3. Power-off system: power cuts off when brakes are applied for user safety.
  4. LCD digital display: mileage, speed, battery life, throttle mode & temperature display.
  5. Grip: comfortable and user-friendly.
  6. Leather saddle: comfortable leather seating.
  7. Rear reflector: safe riding during night time.
  8. Lithium battery: fast recharging, environmentally friendly with a long life span.
  9. Foldable clip: solid and durable.
  10. Power switch: turn main power on/off
  11. High endurance tyre: anti-friction material, safe and durable.
  12. Guard: protects both the front and back wheels and keeps mud away.
  13. Foldable pedal: comfortable and convenient.
  14. Front & rear disc brake: smart and safe disc brake system.
  15. Kickstand: strong support for standing up the E-Scooter.
  16. German brush-less gear motor: powerful and environmentally friendly.
  17. Remote key: smart and portable.

2.3 How to Build and Use

  1. Open the package carton and install the front tyre with the equipped tool as shown below.

  2. Please follow the steps below to open the handle bar.CRUZAA Sit-down E-Scooter with Built in Speakers and Bluetooth - handle bar

  3. Stretch the handle bar and unfold the E-Scooter as shown below.CRUZAA Sit-down E-Scooter with Built in Speakers and Bluetooth - handle bar 2Follow the arrow direction and pull out.
    Follow the arrow direction and pull out.
    Press downwards on the saddles.
    Close the clip

  4. Unfold the pedal and kickstand (as shown).

  5. Switch “on” the power.

  6. Press the button (as shown) on the remote to switch on the E-Scooter.

  7. Slowly rotate the right grip counter-clockwise (as shown), then the Cruzaa E-Scooter will start to move forwards.

  8. Press the left button (as shown), and the LED headlight will be on.

2.4 How to Fold

  1. Open the folding clip first (as shown). Stretch out – follow the arrow direction.
  2.  Lift the saddle bar, and the front wheel will fold naturally (as shown).
  3.  Press the saddle bar into the frame slot. Folding action is completed when hearing a click sound (as shown).
  4.  Lift the clip from the handle bar and move it out from the arc clip, then press the handle bar downwards (as below).CRUZAA Sit-down E-Scooter with Built in Speakers and Bluetooth - downwards
  5. The Cruzaa E-Scooter is folded.

2.5 Intelligent Alarm

2.5.1 How to the set theft alarm
Park the Cruzaa E-Scooter and press the button on the key remote to lock and the display screen will turn off. If the E-Scooter is moved or touched the theft alarm will beep continuously for around 20 seconds.
2.5.2 How to exit the alarm mode
Press the button once to exit from the alarm mode, while the Cruzaa E-Scooter is on.
2.5.3 How to use the remote control to start your Cruzaa E-Scooter Press the button once, the Cruzaa E-Scooter is unlocked when hearing a long sound.

2.6 How to charge

  1. The red indicating light shines when the charger connects to the electricity power. Rotate 90 degrees to open the charge port cover.
    Note : Please use provided chargers ONLY to operate.

  2. General charging time: 4-5 hours Standard charging temperature: 25C

  3. The charger is equipped with a over-current protection system. It will be cut off if the current is too high. Standard charging current is with 3a.

2.7 Charge Electronics & Gadgets

The Cruzaa E-Scooter is equipped with a USB charging interface. It’s very convenient for users to charge mobile phones..

2.8 Bluetooth speaker
The range for the bluetooth speaker is 0-8m. Within 5m is the ideal distance. Both iOS and Android phones are compatible

2.9 LCD Display Setting

2.9.1 You can press button on the LCD display to choose different throttle modes.
There are 4 modes in total. Level 4 is the highest mode to reach the top speed.
2.9.2 You can reset the Cruzaa E-Scooter to factory settings by long pressing the button for 30 seconds. A new screen will appear showing it has been reset successfully.

2.10 Cruise Control Setting

2.10.1 In cruise mode, you can ride the Cruzaa E-Scooter at a constant speed without continuously rotating the throttle.
Start: Press and hold the ‘headlight’ button during driving.
End: Rotate the throttle grip or hold the ‘headlight’ button.
(Detailed operation: Press and hold the (headlight) while driving at a suitable speed, you can then enter into (cruise mode)

Safety Usage

Riding the Cruzaa E-Scooter can be a hazardous activity.
Certain conditions could cause the Cruzaa E-Scooter to fail if this information is not adhered to.
It’s very important to read and follow the safety guidelines before riding.

3.1 Important

  1. Don’t over-speed while riding downhill.
    Don’t use the front brakes suddenly.

  2. Don’t ride on rainly days.

  3. Don’t ride in deep water.

  4. Only authorised chargers and parts can be used to charge the Cruzaa E-Scooter.

  5. Don’t disassemble the Cruzaa E-Scooter.
    This will invalidate your warranty.
    If your Cruzaa E-Scooter stops working please contact us as soon as possible.

3.2 Warnings When Charging

  1. Charge in a safe place where children are out of reach.
  2. Charge fully when it’s the first time of use.
  3. Other brand chargers, batteries are forbidden to use.
  4.  The charger contains high-voltage circuit, don’t disassemble it.
  5. Don’t put any objects on the charger while charging.
  6.  The charger should be used in a dry and ventilated environment.
  7. Stop charging if you detect a funny odour or the charger is over heating. Please contact us immediately if this happens.

3.3 Battery Care

  1. Keep away from fire and flammable, explosive and corrosive gases.
  2. Don’t dismount the battery arbitrarily in order to avoid damaging inner parts.
  3. Don’t damage the label on the battery in order to avoid losing guarantee.
  4. Other brand chargers, other type of batteries are forbidden to use.

Maintenance

To maintain the lifespan of the Cruzaa E-Scooter, please read this part carefully and follow the instructions.

4.1 Basic Maintenance

  1. Please make sure the air pressure for the tyres is 280 kph (40 PSI) before using.
  2. If you don’t use the Cruzaa E-Scooter for a long time you should charge it fully before storing it. Please remember to charge and de-charge it every two months.
  3. It’s important to develop good habits to charge the Cruzaa E-Scooter promptly everyday.

4.2 Regular Checks

  1. Check if screws of front and back wheels are locked firm.
  2. Check if the tyre is worn or damaged, and check if the driving system is smooth.
  3. Check if the connecting terminal is secure.

4.3 Cleaning & Maintenance

  1. Do not wash by water cannon/jet washer in order to avoid damaging inner parts or circuitry inside.
  2. Use neutral cleaner and wipe the strain on the surface of lacquer or plastic parts softly, then wipe with a dry clean cloth.
  3. Do not inject oil to the brake disc or rim.

CRUZAA Sit-down E-Scooter with Built in Speakers and Bluetooth -
fig1

CRUZAA.COM

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals