volkano 10000mAh High Capacity PowerBank Instruction Manual
- June 7, 2024
- Volkano
Table of Contents
volkano 10000mAh High Capacity PowerBank Instruction Manual
Power Bank Layout
Suitable for
- iPhone/iPod
- Most smartphones including: Samsung, LG, Sony, HTC, Nokia, Huawei,
- Motorola, BlackBerry & more
- Smartwatches, fitness trackers
- Digital cameras
- Portable Bluetooth devices such as headset, hands-free car kit speaker etc.
- Portable hand-held gaming consoles
Features
- Recharges more than 500 times
- Includes micro USB cable for charging and re-charging
- Built-in over charging and short circuit protection
Specifications
- Capacity: 10,000mAh
- Battery type: Lithium-ion
- Input: 1 x Micro USB, DC5V 1.8A
- Output: 2 x USB, DC5V 2x 2.1A
- Charging Time: 7 hours
- Size: 78mm(W) x 93mm(L) x 25.5mm(T)
To Charge Power Bank
Charge via USB Wall Charger
Charge via Computer USB Port
- Using the included USB Type A to micro USB Type B cable, connect the larger USB Type A connector to an AC wall adapter or USB port on a computer.
- Connect the smaller micro USB Type B connector to the Input connector on the power bank.
- During charging the LEDs will flash to show charging status.
- When charging is complete all four LED’s will be permanently on.
To Charge a Mobile Phone or other USB Device
- Using your phone or other USB device’s charging cable, connect the USB Type A connector to the Output connector on the power bank.
- Connect the other end of the cable to your device.
- Charging should commence automatically.
- If your phone or device uses a standard micro USB Type B connector then you can also use the included cable to charge your device.
- When your phone or device is fully charged, the power bank will automatically turn itself off.
To Check Remaining Capacity
- Press On/Off button and LEDs will light to show remaining capacity.
- The LEDs will turn off automatically after about 5 seconds.
LED On / Off / Flashing
| Remaining Capacity
---|---
|
Less than 25%
| 25% to 50%
|
50% to 75%
| 75% to 99%
|
100%
Important Safety Instructions
- To maximize battery life span, fully charge power bank before first use.
- Store power bank in a cool and dry place.
- Do not store power bank in hot or humid environment.
- Operating temperature should be between -10c to 45c.
- If power bank is not used for long periods of time, you should charge and discharge once every three months.
- When charging a device, the power bank may feel warm, this is a normal operating condition and should not be cause for concern.
- In normal conditions, the battery performance will decline over several years.
- Do not dispose of power bank in heat or fire.
- Do not clean power bank with harmful chemicals or detergents.
- Misuse, dropping or excessive force may cause product damage.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>